A Unified Model for the Mixing of Non‐Newtonian Fluids in the Laminar,Transition, and Turbulent Region

Summary: Non‐Newtonian fluid behavior has significant influence on quantities in chemical engineering like power input, mixing time, heat transfer etc. In the laminar flow region, the concept of effective viscosity by Metzner and Otto is well established. In the transition region between laminar and turbulent flow, the existing concepts use three and even more empirical parameters to determine the specific power input. Here, a unified and general but simple approach is introduced to calculate the power input for shear thinning fluids over the whole flow region using just one empirical parameter. The Metzner‐Otto relation is obtained as a limiting case for the laminar region. The empirical parameter of the new approach is related to the Metzner‐Otto constant. The concept is validated for eight different stirrer systems. Mixing time and maximum shear rate and heat transfer can also be calculated using this approach. The new concept presented should also be applicable for other apparatuses, e.g., static mixers.

Comparison of experimental data and a curve calculated according to the new method (solid line).     

裂解气压缩机级间注水技术的应用

介绍了裂解气压缩机由注洗油改为注水情况，进而得出结论：改注水降温效果明显，压缩机工作效能可得到有效保障。     

Flow characteristics of hyperboloid stirrers

The flows in a fully-baffled vessel with a diameter T = 144 mm driven by hyperboloid stirrers of diameters D = 773 and 27/3 have been visualised and characterised by local measurements of velocity and turbulence and by power number. The results were obtained for a range of rotational speeds from 6 to 40 rev/s. The visualisation showed that the larger stirrer gave rise to a radial jet and that the smaller stirrer formed a jet inclined towards the base of the vessel so that there was a tendency for the system of two vortices, one above and one below the jet, to give way to a single vortex as the clearance between the stirrer and the base of the vessel was reduced. The velocity measurements revealed bulk-flow values an order of magnitude less than that of the maximum radial velocity in the jet, that the maximum radial velocity was 24% of the circumferential velocity of the tip of the stirrer, and that the radial velocities were proportional to the rotational speed. The flows generated by the hyperboloid stirrer were less vigorous than those of Rushton impellers of similar radius and were associated with power numbers 28 times less. The power number did not vary with rotational speed or with clearance within the measured range. The contrast with propeller and disc stirrers is less pronounced, but the hyperbolic profile is likely to find application and the present results provide a basis for choice.     

Synthesis,characterization, and antitumor activity of poly(maleic anhydride‐co‐vinyl acetate‐co‐acrylic acid)

The ternary copolymerization of maleic anhydride (MA), vinyl acetate (VA), and acrylic acid (AA) [P(MA‐co‐VA‐co‐AA)], which is considered to be an acceptor–donor–acceptor system, was carried out in 1,4‐dioxane with benzoyl peroxide as an initiator at 70°C under a nitrogen atmosphere. Constants of complex formation for the monomer systems in the study were determined by UV–visible (hydrogen‐bonding complex) and ¹H‐NMR (charge transfer complex) methods, respectively. The results show that polymerization of the P(MA‐co‐VA‐co‐AA) system proceeds by an alternating terpolymerization mechanism. It is shown that the synthesized copolymers have typical polyelectrolyte behavior, ability for reversible hydrolysis–anhydrization reactions, and semicrystalline structures. In these cases, including radical polymerization, and formation of semicrystalline structures, the hydrogen‐bonding effect plays a significant role. The in vitro cytotoxicities of the synthesized terpolymer and alternating copolymer were evaluated using Raji cells (human Burkitt lymphoma cell line). The antitumor activities of prepared anion‐active copolymers were studied using methyl–thiazol–tetrazolium colorimetric assay and 50% of the cytotoxic dose of each copolymer and terpolymer were calculated. Hydrolyzed P(MA‐co‐VA‐co‐AA) and P(MA‐alt‐AA) copolymers have sufficiently high antitumor activity, which depends on the amount of hydrogen‐bonding carboxylic groups and their regular distribution in the side chain of functional macromolecules. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3425–3432, 2006     

内构件存在时提升管内流动及颗粒混合行为研究

he hydrodynamics and solids mixing behavior in a riser with blunt internals are studied. A uniform radial distribution for solids fraction and particle velocity achieves near the internals. The turbulent velocity of particles near the wall increases with the addition of the internals, with the lateral solids mixing enhanced significantly. Probability density distribution of particle velocity is bimodal in the riser with internals, which is similar to that in the conventional riser, indicating that no significant difference in the micro flow structure exists between the riser with internals and the conventional riser. At the same time, the axial solids mixing behavior changes insignificantly with the addition of internals. These results indicate that the micro flow structure in the riser is very stable, which changes insignificantly with the change of the bed structure.     

Ribosome display of mammalian receptor domains

Many mammalian receptor domains, among them a large number of potential therapeutic target proteins, are highly aggregation-prone upon heterologous expression in bacteria. This severely limits functional studies of such receptor domains and also their engineering towards improved properties. One of these proteins is the Nogoreceptor, which plays a central role in mediating the inhibition of axon growth and functional recovery after injury of the adult mammalian central nervous system. We show here that the ligand binding domain of the Nogoreceptor folds to an active conformation in ternary ribosomal complexes, as formed in ribosome display. In these complexes the receptor is still connected, via a C-terminal tether, to the peptidyl tRNA in the ribosome and the mRNA also stays connected. The ribosome prevents aggregation of the protein, which aggregates as soon as the release from the ribosome is triggered. In contrast, no active receptor was observed in phage display, where aggregation appears to prevent incorporation of the protein into the phage coat. This strategy sets the stage for rapidly studying defined mutations of such aggregation-prone receptors in vitro and to improve their properties by in vitro evolution using the ribosome display technology.     

Adhesion-Delamination Mechanics of a Prestressed Circular Film Adhered onto a Rigid Substrate

A thin circular film clamped at the periphery is adhered to the planar surface of a rigid cylindrical punch. An external tensile load is applied to the punch, causing the film to delaminate from the substrate and the circular contact edge to contract. The film spontaneously separates from the punch, or pulls off, when the contact radius reduces to a range between 0.1758 and 0.3651 of the film radius, depending on the magnitude of the residual membrane stress. The mechanical delamination process is derived by a thermodynamic energy balance based on a coupled interfacial adhesion and residual membrane stress. The theoretical model has significant implications in nanoforce measurement, microelectromechanical systems (MEMS) comprising active moveable films, and biological cell adhesion.     

Water uptake and mechanical characteristics of natural filler–polypropylene composites

Water uptake characteristics and some mechanical properties of polypropylene composites containing three types of natural fillers, purified α‐cellulose, wastepaper fibers, and wood flour were studied. The fiber contents were 15, 25, and 35% by weight. Two percent maleic anhydride polypropylene (MAPP) was also added to the mix, as the compatibilizer agent. Mixing process was performed in a Brabender Plasticorder until a constant torque was reached. Composites made out of these combinations were then pressed in a laboratory press and ASTM standard test specimens were cut out of the sheets. Water absorption and tensile tests were performed on these specimens. The results showed a significant difference between the various filler types regarding water uptake. Water uptake also increased by the increase in filler content. Tensile strength and elongation at break in composites declined when compared with pure polypropylene, but their modulus of elasticity increased. Among the three types of fillers, no significant discrepancies were observed in terms of improving mechanical properties in composites. Filler content increase had no drastic effect regarding strength improvement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 941–946, 2003     

用木质素磺酸铵作标准化试剂提高单偶氮、双偶氮酸性染料的冷水溶解度的方法

一般的酸性染料溶解度较小,而本文所介绍的单或双偶氮酸性染料,实际上是以碱金属盐的形式存在,由于加入了（按重量计）80％～30％的木质素磺酸铵,改善了室温的冷水溶解度。木质素磺酸铵既作为标准化试剂,用来调节高强度染料到稳定的商品染料,同时又能提高染料在室温时冷水溶解度。