Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens

Wire-arc-sprayed nickel-aluminum is widely used in the aircraft industry for dimensional restoration of worn parts and as a bond coat for thermal barrier coatings and other top coats. Some repair applications require thick coatings, which often result in lower bond strength. A mechanism being investigated to ex-plain this decrease in bond strength is the free edge effect, which includes both coating residual stresses and coating thickness. The layer-removal method was used to determine experimentally the residual stresses in wire-arc-sprayed nickel-aluminum coatings of different thicknesses. Bond strength evalu-ations were performed using an improved ASTM C 633-79 test specimen. Finite-element analysis and fracture mechanics were used to investigate the effects of coating thickness and residual stress state on coating bond strength.     

岸吊焊缝裂纹分析与改进措施研究

从材料的焊接性能、焊接结构、焊条、预热与焊后热处理、焊接工艺参数等角度对岸吊胎架焊缝裂纹进行了分析,提出了改进措施,取得了良好的效果。     

外缘内曲翻边毛坯尺寸的计算

通过对外缘内曲翻边应力应变状态的分析,导出了预测变形区的变形和对毛坯尺寸进行修正的解析式,经与有限元数值模拟和实验结果对比,证实该公式有较高的精度,可以用于确定毛坯尺寸。     

Experimental Study of Microstructure Evolution during Tempering of Quenched Steel and Its Application

LARGE-SIZED FORGINGS are usually intensivelyquenched to obtain the desired microstructuredistribution,high strength and hardness.Becauseresidual stresses are high in quenched large-sizedforgings,tempering processes follow quenchingprocesses to reduce the residual stress and obtain goodmechanical properties.Several differentmicrostructures are generated in quenched steelforgings,such as martensite,bainite and retainedaustenite.Modeling of microstructure evolution inquenched steel during …     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

基于Matlab的自行火炮液压管件应力分析

液压管件作为某型自行火炮液压系统的一类重要元件,其机械性能在很大程度上影响整个液压系统的工作寿命.采用建模和仿真技术研究其应力分布,提出依据广义胡克定律建立液压管件在高强度载荷作用下的力学模型的方法,利用Matlab进行仿真分析,结合仿真结果对液压管件径向及切向应力的分布规律进行了探讨,对于液压管件的疲劳分析以及力学性能研究具有一定的参考价值.     

材料性质和试样几何形状对应力三维度的影响

为研究应力三维度和塑性应变对金属材料微孔聚合型损伤发展和延性断裂过程的影响,用有限元法计算16Mn钢和两种铝合金材料不同缺口根半径拉伸试样的应力、应变分布. 结果表明:缺口根半径越小,最小横截面上周向和径向应变相差越大且越不均匀,并导致最小横截面上的应力三维度与Bridgman公式预测结果不一样. 材料性质和试样几何形状对应力三维度的影响很大:缺口根半径相同的3种材料试样最小横截面的应力三维度分布形态相似,但应力三维度峰值及其所处位置有所不同;同种材料的试样缺口根半径不同,应力三维度分布形态也不同.     

新型转炉系统整体结构三维有限元分析

为考察大型转炉系统应力和变形对生产安全和结构优化设计的影响,采用三维有限元方法,建立新型转炉的整体结构装配体模型,计算该转炉系统在不同倾动角工况及重力载荷下的应力和位移. 通过详细分析各零部件的应力、变形和位移情况,研究应力和位移随倾动角的变化规律,提出改进设计方案. 结果可为转炉系统的设计和应用提供计算依据.     

悬索桥主缆初应力对桥梁动力特性的影响

为掌握主缆初应力对桥梁动力特性的影响,以悬索桥为例,采用静力非线性分析方法计算应力变化过程中悬索桥的跨中挠度、缆索轴力及加劲梁的轴力变化;将得到的内力作为结构的预加应力进行有预应力的模态分析. 应用ANSYS软件进行分析,其中有限元建模时采用4种单元类型:空间梁单元BEAM4用于模拟加劲梁和塔;空间杆单元LINK10用于模拟主缆及吊杆;通过设定BEAM4和LINK10单元初应变进行有预应力的模态分析;采用MASS21单元模拟横隔板、吊杆锚固装置和桥面上的栏杆,并分别考虑质量和质量惯性矩的作用. 分析表明,悬索桥主梁竖弯振动频率受主缆初应力的影响较大,而侧弯振动频率和扭转振动频率受此影响较小. 该结果为同类桥梁的动力特性分析提供参考.     

A NEW BATO COMPLEX^99mTcCl（4—MCDO）3MeB FOR MYOCARDIAL IMAGING

A new nertral complex,^99mTcCl(4-MCDO)3MEB,((Bis[4-methyl-1,2-cyclohex-anedionedioximato(1-)-O]-[4-methyl-1,2-cyclohexanedione-dioximato(2-)-O] methyl-borato(2-)-N,N‘,N″,N‘‘‘,N‘‘‘‘0-chlorotechnetium,generally called BATO(Boronic acid adducts of technitium dioximes),has been synthesized and evaluated for potential use in myocardial perfusion imaging,It has intrinsic affinity for the blood clearance.The uptake of heart.lung and blood in mice at 2min separately are 1.12,2.48 and 6.66%ID.The complex formation is rapid,simple and highly yielded(≥93%).This process is easy to kit formation.