尖晶石粒度对高纯刚玉-尖晶石浇注料性能的影响

研究了尖晶石粒度对高纯刚玉 -尖晶石浇注料的抗折强度、抗热震性、抗侵蚀性等性能的影响。实验表明 :(1)随着配料中尖晶石颗粒含量的增加 ,试样的烧后强度呈先升高后降低趋势 (烘后强度变化不明显 ) ,烧后收缩减少 ,然后变为膨胀 ;(2 )尖晶石细粉与颗粒为 1:3的试样抗热震性较好 ;(3)对于高碱度渣 ,尖晶石颗粒加入量较多的试样抗侵蚀性较好 ;(4)对于低碱度渣 ,尖晶石细粉加入量较多的试样抗侵蚀性和抗渗透性均较好。     

自重施加方式对高拱坝廊道结构应力及配筋的影响

自重工况一般是高拱坝内廊道配筋设计的控制工况,由于高拱坝施工过程的特殊性及复杂性,有限元计算中自重有多种施加方式。结合工程实例,对高拱坝基础廊道结构进行三维有限元分析,比较不同自重施加方式对廊道结构应力及配筋的影响。研究结果表明:按整体自重考虑时,廊道结构应力及配筋面积明显偏小;全部按分缝自重考虑时,廊道结构应力及配筋面积明显大于按施工过程考虑自重的结果;为符合实际施工过程及结构承载规律,保证结构安全及经济合理,在拱坝结构的有限元计算中应按照施工过程考虑自重荷载。该研究成果对泄洪孔结构的应力分析也具有参考价值。     

珠江干流(2008—2015年)水质变化趋势分析

以珠江干流为研究区域,选取源头及干流10个水质断面的2008-2015年7项参数监测数据,采用季节性kendall趋势检验法分析珠江干流的水质变化趋势,得出珠江干流各测站的pH、溶解氧(DO)、高锰酸盐指数(CODMn)、总磷(TP)、氟化物(F-)共5项参数趋于改善,五日生化需氧量(BOD5)及氨氮(NH3-N)共2项参数浓度基本保持不变;流域水质变化综合指数WQTI表明珠江干流总体水质状况趋向改善;水质呈现上游恶化中下游好转、污染物呈现以省区为单位以省会为中心的西部低东部高的地域分布特点.     

山西省孝义市近40年气候变化特征分析

为了深入研究山西省孝义市气候变化特征,采用Mann-Kendall检验、滑动T检验及Morlet小波变换等方法对孝义市1975-2015年气候要素进行趋势估计、突变检验、周期分析及发展趋势预测。结果表明:近40年来,孝义市年平均气温呈显著上升趋势,突变年份为1996年,存在32、9 a长周期;年降雨量呈不显著下降趋势,突变年份为1990年,存在32、6 a长周期;年蒸发量呈显著性上升趋势,突变年份为1997年,存在32、10 a长周期;年平均相对湿度呈显著下降趋势,突变年份为1982、2003年,存在15、32 a长周期。孝义市1975-2015年年代际气候经历了"冷湿-暖湿-暖干"的变化过程,预测全境2017-2030年年代际气候将经历"冷湿-暖干"的变化过程。     

Effects of hydrological changes on cooperation in transnational catchments: the case of the Syr Darya

Water allocation along the Syr Darya River may be affected by climate change. Here we statistically model cooperation strategies, country profits, and sensitivity of cooperation, showing that the hydrological regime affects transboundary cooperation. Climate change in the twenty-first century may reduce glacial cover, and reducing stream flows, decreasing chances of cooperation and potentially raising conflicts. Comparison with other transboundary catchments in Central Asia indicates moderate-to-high risk of conflicts for the Syr Darya. A template is provided for assessment of the stability of cooperation in the Syr Darya basin, and in catchments similarly dependent on water availability.     

Patterns in the crustacean zooplankton community in Lake Winnipeg,Manitoba: Response to long-term environmental change

Changes in the crustacean zooplankton community composition and abundance in Lake Winnipeg (1969–2006) provide a rare opportunity to examine their response to environmental changes in the largest naturally eutrophic lake on the Canadian prairies. Since 1929, zooplankton species composition in Lake Winnipeg has changed little except for the addition of the invasive cladoceran, Eubosmina coregoni in 1994. The dominant taxa in the lake in summer include: Leptodiaptomus ashlandi, Acanthocyclops vernalis, Diacyclops thomasi, Daphnia retrocurva, Daphnia mendotae, Diaphanosoma birgei, Eubosmina coregoni, and Bosmina longirostris. Climate-accelerated nutrient loading to southern Lake Winnipeg over the last two decades has led to increased phytoplankton abundance and higher frequency of cyanobacterial blooms especially in its northern basin. Crustacean zooplankton have likewise increased especially in the North Basin, but less so in the more nutrient rich South Basin, possibly as a consequence of higher densities of pelagic planktivorous fish and light-limited primary production compared with the more transparent North basin (Brunskill et al., 1979, 1980). Calanoid copepods play a larger role in the South basin food web in contrast to cyclopoid copepods and Cladocera in the North basin. The study begins to fill the recognized gap in understanding of Lake Winnipeg's food web structure and provides a baseline for evaluating ongoing changes in the zooplankton community with the arrival of new non-indigenous taxa, e.g. Bythotrephes longimanus and Dreissena polymorpha. It reinforces previous work demonstrating that zooplankton provide valuable indices toward evaluating the health of an ecosystem.     

Preparation,characterization, and prominent thermal stability of phase‐change microcapsules with phenolic resin shell and n‐hexadecane core

Microcapsules with phenolic resin (PFR) shell and n‐hexadecane (HD) core were prepared by controlled precipitation of the polymer from droplets of oil‐in‐water emulsion, followed by a heat‐curing process. The droplets of the oil phase are composed of a polymer (PFR), a good solvent (ethyl acetate), and a poor solvent (HD) for the polymer. Removal of the good solvent from the droplets leads to the formation of microcapsules with the poor solvent encapsulated by the polymer. The microstructure, morphology, and phase‐change property as well as thermal stability of the microcapsules were systematically characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimety (DSC), and thermogravimetric analysis (TGA). The phase‐change microcapsules exhibit smooth and perfect structure, and the shell thickness is a constant fraction of the capsule radius. The initial weight loss temperature of the microcapsules was determined to be 330°C in N₂ and 255°C in air, respectively, while that of the bulk HD is only about 120°C both in air and N₂ atmospheres. The weight loss mechanism of the microcapsules in different atmosphere is not the same, changing from the pyrolysis temperature of the core material in N₂ to the evaporation of core material caused by the fracture of shell material in air. The melting point of HD in microcapsules is slightly lower than that of bulk HD, and a supercooling was observed upon crystallization. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

灞河流域气候因子对水沙变化的影响

利用灞河流域蓝田气象站和马渡王水文站1960—2012年的气象、水文实测资料,分析灞河流域气候及水沙变化规律,同时运用相关性分析、灰色关联分析、多元线性回归模型等多种方法探讨了该流域水沙变化与气候变化的关系。结果表明:灞河流域降雨量、蒸发量、径流量和输沙量皆呈显著下降趋势,而气温呈上升趋势;降雨量与水沙都有重要的相关关系,1960—1990年影响径流量的气候因子敏感度由大至小依次为降雨量、气温、蒸发量,而1991—2012年则为降雨量、蒸发量、气温,当气温和蒸发量不变时,降雨量每增加1 mm,两阶段的年径流量分别增加0.14亿m3和0.08亿m3;1960—2012年影响输沙量的气候因子敏感度由大至小依次为降雨量、气温、蒸发量,当气温和蒸发量不变时,降雨量每增加1 mm,年输沙量增加0.668万t。     

Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles

This paper reports a study on the thermal stability of phase change material microcapsules that are incorporated with silver nano-particles (Ag-NPs). The novel microcapsules were fabricated by the technique of in situ polymerization, with aminoplast as the wall and phase change material bromo-hexadecane (PCM BrC16) as the core. Thermal gravimetry (TG) analysis was applied to measure the thermal stability of these microcapsules and surface morphology of the microcapsules was observed by means of scanning electron microscopy (SEM) after an application of curing treatment at 130 °C. Comparing with conventional phase change material microcapsules (PCMMs), nano-composite phase change material microcapsules (NCPCMMs) have higher thermal stability. This can be attributed to nano-composite structure of the microcapsules, in which metal Ag-NPs distributed on the surface to increase wall toughness and strength. The possible reinforcement mechanisms of the nano-composite structure are explored.