视频编码中的块运动估计算法

在视频压缩的一些国际标准，如Ｈ．２６１，Ｈ．２６３，ＭＰＥＧ０－１，ＭＰＥＧ－２，ＨＤＴＶ中，视频系统编码器的复杂性最主要取决于运动估计。下文以ＭＰＥＧ－２编码器为例，通过计算机模拟实验，得出了一些常用运动估计算法的对比实验结果，以及采用常用的几种匹配函数的对比实验结果。     

β—FeSi2一种很有发展前途的热电材料

简述了βＦｅＳｉ２热电材料的研究工作，分析了β－ＦｅＳｉ２的制备及其热电性能，认为机械合金化是制造β－ＦｅＳｉ２热电材料的发展方向之一。     

Boundary trend of α1/(α1 +α2) phase region at lower Cu side in Al-Zn-Cu system

The range of miscibility gap above 300 ℃ at low Cu side in Al-Cu-Zn ternary system was obtained by EPMA of the designed alloys and diffusion-couples treated for equilibrium. The results about the boundary trend of the α1 / (α1 α2 ) phase region was obtained. The α1 / (α1 α2 ) boundary moves towards the lower Zn side with the increase of Cu content. The results are opposite to traditional phase diagrams obtained by experiments, but consistent with recent thermodynamic calculations.     

TP347H不诱钢与12Cr2MoWVTiB（G102）耐热钢异种钢焊口试验分析

文章对运行55 221．64h的TP347H不镑钢与12Cr2MoWVTiB(G102)耐热钢异种钢焊接接头进行了试验研究，结果表明，G102侧热影响区为整个焊接接头的薄弱环节，鉴于该类焊接接头G102侧热影畸区冲击值很低，建议尽早更换。     

碳纤维表面处理对铝电解用硼化钛阴极涂层性能的影响

硼化钛阴极涂层是铝电解用可润湿性阴极材料中的一种，具有优良的抗钠渗透性和对铝液润湿性，可以有效地延长铝电解槽寿命。碳纤维是硼化钛涂层材料的增强剂之一．对硼化钛阴极涂层的性能影响很大。本文研究了不同工艺的液相碳纤维表面氧化处理法对硼化钛阴极涂层抗拉强度和粘接强度的影响。采用PTIR检测碳纤维处理后表面含氧基团的变化，寻找影响硼化钛阴极涂层性能的原因，从而达到最有效地提高TiB2阴极涂层抗拉强度和粘接强度的目的。结果表明，采用工艺(1)(10％HNO3，80℃、恒温5min．超声波、5min)对碳纤维进行表面处理最合理，处理后碳纤维表面含氧基团的含量最高．用其制备硼化钛阴极涂层的抗拉强度、粘接强度最大。     

试论E62型精梳机

提出E7／5模式，详述了E62型精梳机在E7／5型精梳机的基础上的改进、利用计算机辅助工程优化设计进行优化组合的成功之处以及管理、维护方面的建议，指出了E62型精梳机的九项缺陷，建议有关纺机厂避免同一模式重复性竞争，开发有自主知识产权的精梳机。     

固体超强酸SO2-4/Fe2O3-TiO2催化合成癸二酸二乙酯的研究

研究了用固体超强酸SO4^2-/Fe2O3-TiO2为催化剂，由癸二酸和乙醇反应合成癸二酸二乙酯的最佳工艺条件。结果表明，当n(醇）：n(酸）＝4．0：1，催化剂用量为酸质量的5％，反应时间为3．5h，酯的产率可达96％。该工艺产率高，反应时间短，无腐蚀无污染，催化剂可回收、活化、重复使用10次。     

Chemical States of Lanthanum in Carbonized La2O3-Mo Thermionic Cathode Materials

The chemical reaction between lanthanum oxide and molybdenum carbide was studied by thermodynamic calcu-lation, thermal analysis and in-situ X-ray Photoelectron Spectroscopy. The theoretical results show that at the environment allowing for the evaporation of lanthanum, such as in high vacuum, La2O3 in the La2O3-Mo materials can be reduced to metallic lanthanum by molybdenum carbide (Mo2C). To confirm the conclusion, many analysis methods such as XRD, SPS, and TG-DTA were taken. The experimental results show that the chemical state of lanthanum changes during heat-ing. It was proved, for the first time, that reacted metallic lanthanum appears at the surface of this kind of material at high temperature.