吸收雷达波包装材料的研究进展

论述了吸收雷达波包装材料的基本组成及其选择原则，在此基础上讨论了吸波材料的吸波原理及影响吸波性能的因素，并指出了吸波包装材料的开发现状和应用进展及其发展万向。     

Satellite SAR Remote Sensing of Great Lakes Ice Cover,Part 2. Ice Classification and Mapping

During the 1997 winter season, shipborne polarimetric backscatter measurements of Great Lakes (freshwater) ice types using the Jet Propulsion Laboratory C-band scatterometer, together with surface-based ice physical characterization measurements and environmental parameters, were acquired concurrently with Earth Resource Satellite 2 (ERS-2) and RADARSAT Synthetic Aperture Radar (SAR) data. This polarimetric data set, composed of over 20 variations of different ice types measured at incident angles from 0° to 60° for all polarizations, was processed to radar cross-section to establish a library of signatures (look-up table) for different ice types. The library is used in the computer classification of calibrated satellite SAR data. Computer analysis of ERS-2 and RADARSAT ScanSAR images of Great Lakes ice cover using a supervised classification technique indicates that different ice types in the ice cover can be identified and mapped, and that wind speed and direction can have an influence on the classification of water as ice based on single frequency, single polarization data. Once satellite SAR data are classified into ice types, the ice map provides important and necessary input for environmental protection and management, ice control and ice breaking operations, and ice forecasting and modeling efforts.     

小型微/纳米级三坐标测量机的研制

介绍一套低成本小型三维坐标测量机的研制过程，作为微/纳米级超精密测量设备，整体机台结构采用花岗岩材料；X／Y轴的移动平台利用压电材料摩擦驱动与挠性变形原理，长短两行程可达25mm范围及5nm的微位移，藉自行研发的衍射干涉激光尺，位置回馈测量系统可具有0．025nm的分辨率；测量探头在一般DVD光读取头的自动聚焦原理基础上改装，最佳分辨率可达2．5nm，该雏形机适于测量微机电组件、微型器件及膜厚等。     

平面波谱法分析电磁波在管道中的传播

通过分析电磁波从管道开口耦合进入管道的绕射机理及场在腔体内的射线特征，将进入管道的绕射场展开为平面波谱，利用平面波在自由空间的传播特性分析了电磁波沿管道的传输和反射特征。通过算例验证了该算法的有效性。     

基于SPM技术的纳米信息存储薄膜的研究进展

扫描探针显微技术SPM可以在原子或分子尺度上对表面进行表征和修饰，应用SPM技术可以在薄膜表面形成纳米级的信息点阵，特别适合发展超高密度的信息存储，是一种非常有希望代替传统磁存储，光存储的纳米级存储技术，本文介绍了纳米信息存储薄膜的研究进展，并对其制备技术和读写机制进行了初步的探讨。     

微区电阻测试方法及新测试仪研制

文章对国内外开展微区薄层电阻测试的方法进行了综述，特别对改进范德堡四探针技术方法的测试原理、测试过程与测试结果进行了论述与分析，对微区电阻测试方法的进一步发展提出了一种可操作的方法，并研制出新型四探针测试样机。     

用硫磺盖帽电探针测定工业炸药爆轰压力

文中介绍了利用硫磺盖帽电探针测定工业炸药爆轰压力的方法，并对煤炭工业常的４类１１个品种炸药的爆轰压力进行了实际测量。     

Early detection of ageing in solder joints through laser probe thermal analysis of the peltier effect

We have recently developed an optical contactless method for testing the quality of solder joints during accelerated thermal cycling ageing processes.¹ The method was based upon the measurement of the dynamic thermal behaviour of the joint to short bursts of Joule heating. It has proved to be efficient in revealing the formation of cracks at the lead-solder interface. We present a method to evaluate ageing at a much earlier stage in the cycling process. We have observed in earlier work,¹ that before cracks appear, structural changes occur in the solder at the lead-solder interface. The thermal response of the solder joint is recorded over time to a Peltier heat perturbation produced by flowing a current pulse through the interface where structural changes occur. The key point in this method is to discriminate the Peltier effect from the Joule thermal response because both effects generate heat. The variation of the early Peltier response in the thermal cycling ageing tests is seen as a quantitative signature of the structural changes in the lead-solder interface.     

测定地下水流向的多计数管探头的研制

多计数管流向探头;;单孔;;总流向;;局部流向;;滤水管 掌握地下水的流动方向,有助于研究地下水的运动规律。利用放射性单孔法可以测定地下水流某一点流动方向。 应用放射性指示剂在单孔中测定地下水流向的方法由奥地利的梅尔霍费于1963年首先提出,1964年波兰的鲍劳斯齐克等把这种方法用于现场测量。放射性单孔流向测量方法有若干种,其原理基本相同,仅测量装置结构有区别,早期有单管旋转式探头。我们从1983年7月     

Evaluation of the reactivity of titanium with mould materials during casting

A methodology for evaluating the reactivity of titanium with mould materials during casting has been developed. Microhardness profiles and analysis of oxygen contamination have provided an index for evaluation of the reactivity of titanium. Microhardness profile delineates two distinct regions, one of which is characterised by a low value of hardness which is invariant with distance. The reaction products are uniformly distributed in the metal in this region. The second is characterised by a sharp decrease in microhardness with distance from the metal-mould interface. It represents a diffusion zone for solutes that dissolve into titanium from the mould. The qualitative profiles for contaminants determined by scanning electron probe microanalyser and secondary ion mass spectroscopy in the as-cast titanium were found to be similar to that of microhardness, implying that microhardness can be considered as an index of the contamination resulting from metal-mould reaction.