大面积水域浓度场测试方法及系统研究

针对大面积水域浓度场难以实现实时测量、测量精度不高等问题,采用了一种多通道荧光测试系统和方法。首先,基于单色光诱导荧光检测浓度(LIF)原理,使用探头获取离散点的浓度参数。然后,经总线或通信网络技术,将数百个测点连接起来。最后,通过数据总线或网络将采集的数据输送到中央测控计算机中,处理离散的数据后形成完整的浓度场。在恒定流浓度场中的试验结果表明,污染物测量相对误差均值不超过5%,单次测量相对误差最高值为8.33%,传感器线性度不超过5%,可检测的荧光素钠溶液浓度分辨率为0.001 ppm,系统测量稳定、精度较高。相较于其他浓度测量方法,该系统具有测量面积大、实时测量的优势,可为水污染防治等领域提供可靠的技术支撑。     

Langmuir probe RF plasma compensation using a simulation method

The problem of Langmuir probe data deformation due to RF pickup by the probe is treated through a computer simulation method. It is pointed out that proper RF compensations can be obtained by treatment of the Langmuir probe raw data through the use of computer software. It is demonstrated that correct, RF unaffected probe I–V$I\text{–}V$ characteristics can be accurately reproduced from the RF contaminated data. This eliminates the need for the use of any filters or other hardware procedures. User friendly matlab based software is presented. The software automatically retrieves the correct RF I–V$I\text{–}V$ characteristics for single Langmuir probe data which consequently allows for proper evaluation of plasma parameters such as the plasma electron temperature, electron number density and the electron energy distribution function (EEDF)     

Miscibility and Probe Tack of Acrylic Pressure Sensitive Adhesives—Acrylic Copolymer/Tackifier Resin Systems

Miscibility between acrylic copolymers and tackifier resins are investigated in terms of phase diagrams, and the probe tack of the blends are measured as a function of both temperature and rate of separation in order to obtain the master curves. It is found that the probe tack of the pressure sensitive adhesives are closely related to the miscibility between the components. The master curves of the miscible blends shift along the X(rate)-axis according to the change of T_g of the bulk materials with a gradual variation of the peak heights. However, those of the immiscible blends will not shift along the X(rate)-axis, but the magnitude will decrease with increase of a dispersed phase.     

利用电阻探针对石油设备及管道的腐蚀进行监测

从1998年起，国内石油炼制行业开始大量炼制进口高硫原油，油气管道的腐蚀问题受到了重视。介绍了电阻探针腐蚀监测系统的原理及组成。并针对油气管道，实施了在线监测，安装了6组腐蚀电阻探针，分析了测量结果，为今后防腐工作提供了依据。     

人体局部代谢率监测系统设计

在实现将温度、湿度及辐射传感器集成于独立检测探头基础上,设计了一种人体局部代谢率监测系统。系统通过采集人体指端生理参数,根据人体能量代谢守恒法,建立数学模型并计算静息代谢率。经过实验验证:该系统可以实现代谢率的方便测量,测试结果能够反映人体正常的代谢情况。由于系统设计简便、成本低,可被广泛用于人体的能量代谢率检测。     

运动颗粒团一维连续成像分析系统

本文开发了ＦＬＯＴＵ－Ｉ型多相流径向密度连续测量和成像系统，这一系统采用石英光纤传像束为传感器，通过微机Ｉ／Ｏ控制发光二极管顺序发光，Ａ／Ｄ高速数据采集对传感器进行高速扫描，实现了大视场下两相流的连续测量和成像过程，并将它用于观察分析循环流化床中气固两相流动行为，在内径为１８６ｍｍ的循环流化床内测得了颗粒团图像。     

应用电导探针测定固－液两相流的局部速度

研制了用于测定固－液两相流液相局部速度的双电极电导探针，并在０．７５ｍ×０．７５ｍ×１ｍ方形固－液搅拌槽内测定了叶轮排出流区的速度分布。     

雷达吸波材料的研究现状及发展前景

首先阐述了吸波材料的研究意义,然后综合讨论了吸波材料的工作原理、类型以及研究现状, 最后介绍了吸波材料在军事方面的应用及未来的发展趋势。     

降膜波动特性的研究

本文提出了一种测定膜厚的新方法－双电导探针法，测定了高湍流降膜的厚度沿降膜管管程的变化情况，探讨了径向平均膜厚及膜厚的概率密度分布沿管程的变化规律，证明降膜的波动特性同时受到液相雷诺数和管程的影响。并对平均膜厚和液相雷诺数作了经验关联，得出NT＝（δ^ )^2/3 [8.92(ReL/4)^5/2 6.0×10^-6(ReL/4)^9/2]^2/15。