Preparation of multi-compositional gas sensing films by combinatorial solution deposition

Various compositions of gas sensing films were prepared by the combinatorial deposition of SnO₂, ZnO, and WO₃ sol solutions and their gas sensing behaviors were investigated. The film composition could be manipulated conveniently via the alternate dropping of different oxide sol solutions. From the correlation between film compositions and gas sensitivities, the selective detection of C₂H₅OH and CH₃COCH₃ in the presence of CO, C₃H₈, H₂, and NO₂ could be attained. In addition, the discrimination between C₂H₅OH and CH₃COCH₃, which is a challenging issue due to their similar chemical nature, becomes possible. This research demonstrates the precise design of the sensor-material composition for the selective gas detection via the combinatorial approach.     

在VC 6.0对话框应用程序中实现打印和打印预览

对于许多应用程序打印和打印预览功能是必不可少的,利用Visual C + +6.0的文档/视图框架可以很方便的实现这一点,但如果应用程序是基于对话框的,则有很大的问题.本文结合具体实例应用实例介绍一种在对话框应用程序中实现打印和打印预览的方法.     

GLU♮ embedded in C++: a marriage between multidimensional and object‐oriented programming

The embedding of a small but expressive language of multidimensional functional programming in a well known and widely used language of object‐oriented programming leads to the combination of two radically different programming models. In this paper, we formally define the syntax and semantics of GLU^?, which can be thought of as the multidimensional core of Lucid and GLU, and we describe its implementation as a language embedded in C++. With the aid of a few examples, we argue that the marriage of the two programming models is not only compatible and natural, but also that it produces a new and interesting hybrid language. Copyright © 2004 John Wiley & Sons, Ltd.     

Micromechanical approach to damage mechanics of composite materials with fabric tensors

The purpose of this study is to apply continuum damage mechanics – introduced through the concept of fabric tensors – to composite materials within the framework of the theory of elasticity. A directional data model of damage mechanics for composite materials will be developed using fabric tensors. The introduction of fabric tensors into the analysis of damage of composite materials will allow for an enhanced and better understood physical meaning of damage. The micromechanical approach will be used here to relate the damage effect through fabric tensors to the behavior of composite materials. In this approach, damage mechanics is introduced separately to the constituents of the composite material through different constituents’ damage effect tensors. The damaged properties of the composite system as a whole can then be obtained by proper homogenization of the damaged properties of the constituents.

The derivation of a generalized formulation of damage evolution will be shown here in a mathematically consistent manner that is based on sound thermodynamic principles. Numerical examples will be presented to show applicability. In addition, damage evolution for the one-dimensional tension case is also illustrated.     

基于USB接口的心电信号数据采集系统

介绍了基于USB接口的心电信号数据采集系统，给出了该系统的硬件组成原理及软件设计方法。由于该系统使用了高性能的USB专用芯片CY7C64613，因而具有使用方便、即插即用等特点。与笔记本电脑相连即可构成移动式心电信号检测分析仪器，具有较高的实用推广价值。     

DSP与PC间的数据通讯

DSP由于具有高性能和灵活可编程的优点而得到广泛的应用。文章给出了用PC机作主机 ,DSP作从机来实现DSP与PC机间有效、可靠通讯的实现方法。同时通过一个数据传输程序的例子来详细阐述如何使用VB6.0专业版作为开发工具 ,并利用DSP中的SCI(SerialCommunicationInter face)模块来实现DSP与微机间的数据传递方法。     

AMBE-1000声码器接口电路设计方法

DVSI公司的AMBE-1000声码器芯片是一款高性能的全双工、实时语音压缩编解码芯片,可以应用于卫星通信、保密通信、视频会议等领域.文中简要介绍AMBE-1000声码器的A/D-D/A接口以及信道接口的工作原理;结合实例分别给出了AMBE-1000声码器与PCM编解码器MC14LC5480的A/D-D/A接口电路、与单片机AT89C51的信道接口电路的设计方法;最后指出了电路设计中应该注意的问题.     

基于经验数据的温室内的温湿度过程控制系统

针对温室内的温湿度过程控制中参数人工设定的困难和参数自设定的必要性,提出了一种新颖的基于经验数据的适用于温室内的温湿度过程控制系统.该系统硬件采用新型的数字式温湿度一体化传感器LTM8901.温湿度过程控制系统采用具有大容量Flash存储器的C8051F023微控制器,它可在1年时间内以小时为单位设定经验温湿度值,用于控制并记录实测值,实现在1年时间内完全自动控制,无须操作人员干预.具有数据可靠、安装简单、使用和维修方便的特点.     

Luminescent Properties of Nanometer Si with Embedded Structure

Blue luminescence at about 431nm is obtained from epitaxial silicon after C^ implantation,annealing in hydrogen ambience and chemical etching sequentially. When annealed in nitrogen ambience and etched accordingly, there is a much narrower peak at about 430nm. During C^ implantation,C=O compounds are introduced into and embedded in the surface of nanometer Si formed during annealing,at last, nanometer silicon with embedded structure is formed,which contributes to the blue emission.     

MSP-G320240DBCW-211N大规模点阵式LCD与PIC单片机接口技术

介绍了大规模点阵式液晶显示器MSP-G320240DBCW-211N的特点及其与PIC18F6620单片机的接口技术，提出了应用过程中可能遇到的问题和解决方法．给出相关的C程序设计并在研制的智能光电检测仪器上得以成功地应用。