氢对Ti合金的Debye温度和晶格常数的影响

使用X射线衍射仪测定出不同氢含量的Ti-30Mo合金的Debye特征温度值以及晶格常数的变化,结果表明随着氢含量的增加,Debye特征温度相应地减小而晶格常数增加,证实了氢含量的增加会导致金属原子间键合力的减弱,从而造成金属脆化。     

Creep-induced local lattice parameter changes in a monocrystalline nickel-base superalloy

The γ-γ lattice mismatch of specimens of the monocrystalline nickel-base superalloy SRR 99 has been measured by a high-resolution X-ray diffraction technique for the undeformed state and after high-tem-perature creep deformation. During creep deformation beyond the minimum creep rate (total strain =0.5%), the lattice mismatches, measured in and perpendicular to the [001] stress axis, respectively, un-dergo changes in opposite directions. This reflects the buildup of a complex deformation-induced triaxial state of internal stress in the phases y and γ. The overall resolved shear stresses that act in γ and y due to the combined action of the external and internal stresses are estimated, and the conditions under which cutting of the γ phase by dislocations should occur are discussed.     

基于不同受益者的莫莫格湿地生态系统服务权重分析

为了明确不同区域和不同社会身份受益者对湿地生态系统服务的关注程度,为今后湿地生态系统服务的管理和政策制定提供依据,以吉林省莫莫格国家级自然保护区为研究对象,运用层次分析法从当地受益者、省域受益者、全国受益者和全球受益者四个层次以及年龄、收入、职业和教育背景等社会属性对莫莫格湿地的物质生产、调蓄洪水、固碳、气候调节、大气调节、水质净化、科研教育和休闲旅游等8项服务进行比较并打分,得出权重结果。结果表明:当地受益者和省域受益者最关注湿地的调蓄洪水服务,其权重值分别为0.276 1和0.266 7;全国受益者最关注湿地的气候调节服务,其权重值为0.223 8;全球受益者最关注湿地的固碳服务,其权重值为0.203 0。年龄越高的受益者更为关注水质净化和调蓄洪水等服务;文化程度越高的受益者对于湿地的科研教育的关注程度相对较高;生态相关职业的受益者更为关注生态相关的调蓄洪水、固碳、气候调节和科研教育服务。     

Incrementally building frequent closed itemset lattice

A concept lattice is an ordered structure between concepts. It is particularly effective in mining association rules. However, a concept lattice is not efficient for large databases because the lattice size increases with the number of transactions. Finding an efficient strategy for dynamically updating the lattice is an important issue for real-world applications, where new transactions are constantly inserted into databases. To build an efficient storage structure for mining association rules, this study proposes a method for building the initial frequent closed itemset lattice from the original database. The lattice is updated when new transactions are inserted. The number of database rescans over the entire database is reduced in the maintenance process. The proposed algorithm is compared with building a lattice in batch mode to demonstrate the effectiveness of the proposed algorithm.     

Local orders,lattice distortions,and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb,Ti, V)

High-entropy carbides (HECs) are regarded as potential candidate structural materials with attractive mechanical properties due to their ultra-high hardness. It is essential to reveal the atomic and electronic basis for strengthening mechanism in order to develop the advanced HECs. In the present work, C (M = Nb, Ti, V) are selected as case studies. The effects of transition metals (M) on the lattice parameters, bulk modulus, enthalpy of formation, electron work function (EWF), and bonding morphology/strength of HECs are comprehensively studied by first-principles calculations. It is found that the lattice parameters, equilibrium volumes, and bulk modulus of HECs are improved with the increase of M atomic volumes. The atomic-size differences among various groups of elements not only result in the lattice mismatch/distortion but also contribute to the formation of weak spots. In the view of bonding charge density, the electron redistributions caused by the coupling effect of the lattice distortion and valance electron differences can be revealed obviously, which identify the different bonding strength. Moreover, in terms of EWF, the proposed power-law-scaled hardness of HECs is validated and matches well with those reported theoretical and experimental results, providing a strategy to design advanced HECs with excellent mechanical properties.     

基于双阶跃信号输入的Volterra模型辨识

Volterra模型作为非线性领域的一种非线性模型,由于其对工业过程可以以任意精度逼近,使得该模型有很广泛的应用研究意义。在将该模型运用到实际控制系统中之前,模型的高精度辨识显得尤为重要。在以往针对Volterra模型的辨识算法中,基本上主要是采用通用辨识算法识别模型参数,比如最小二乘法及各种改进的最小二乘法。这些通用的辨识算法在辨识Volterra模型时,不能充分考虑其非线性特点,同样不能在辨识过程中充分利用该特点。本文在充分考虑Volterra模型非线性的前提下,提出了一种基于双阶跃信号输入的Volterra模型辨识算法,该算法辨识原理简单,计算量较小,论文最后将该辨识算法应用到典型非线性CSTR系统的的辨识中,辨识结果证明了算法的有效性。     

动态格点搜索的改进算法用于团簇结构快速优化

结合高效的动态格点搜索(DLS)算法与扰动操作(Perturbation Operation)提出一种新的改进方法(DLS-PO),用于确定团簇的最低能量结构。针对一个特定构型,DLS算法总能给出其对应搜索空间的最规则结构。然而,一次失败的DLS优化将消耗大量的运算资源。为此,采取原子移动和结构旋转的扰动操作成功地改变了构型,再结合后续的DLS操作,提高了优化效率。将该算法用于原子数高达309的Lennard-Jones团簇及100原子NP-B函数铝团簇的结构优化。优化结果显示相比于DLS算法,DLS-PO算法更为高效。     

复杂体制雷达辐射源信号特征的集对分析

为解决复杂体制雷达辐射源信号特征的评价问题,提出了基于集对分析理论的复杂体制雷达辐射源信号特征分析模型.首先对复杂体制雷达辐射源信号特征评价指标体系的指标权重作层次分析,再通过集对分析理论对复杂体制雷达辐射源信号特征评估的决策矩阵进行同一度分析,最后联合指标权重矩阵和决策同一度矩阵对复杂体制雷达辐射源信号特征进行综合评判.仿真结果表明,该模型是有效、可行的,能够更好地实现对复杂体制雷达辐射源信号特征的分析和评估.     

Structural characteristics of oxide nanosphere supported metal nanoparticles

Structural characterization by transmission electron microscopy of metal nanoparticle coatings on oxide nanospheres has been employed to point out the potential of such materials for use as porous support model catalysts. On silica and titania nanospheres of various origins surface-mediated metal deposition at mild temperature conditions has been utilized to fabricate Pt, Pd, Ag, and Au nanoparticle coatings on the oxide supports. Promising coating characteristics have been achieved for Ag and Au nanoparticles by direct reduction on terminating hydroxyl-rich St?ber silica. A high-resolution electron microscopy analysis directed to surface stress, lattice contraction and planar lattice defects of the latter particles revealed no strong metal-support interaction.     

宽带功率放大器PGSC建模方法及预失真研究

针对宽带功率放大器的强记忆效应特性,提出一种功放建模和数字预失真方法——PGSC模型。利用广义记忆多项式(GMP)、特定交叉项(SCT)及记忆时刻信号交叉项(CIMT)3个基函数来构造功放行为模型及数字预失真器,并搭建实际测试平台对模型的精度及线性化效果进行验证。测试结果表明,与PMEC方法相比,PGSC方法建模时的归一化均方误差减少了2.1 dB,数字预失真时输出信号的三阶邻信道功率比降低了4.94/2.03 dB;与GMP方法相比,PGSC方法仅利用73%的系数即可得到更高的模型精度和更好的线性化效果。