Characterization of ultrafine La x Sr1−x MnO3 powder prepared by spray pyrolysis

The characterization of La _x Sr_1−x MnO₃ powders produced by spray pyrolysis using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observation, specific surface area (Brunauer-Emett-Teller), and particle size distribution measurements shows that the resultant large particles are loose agglomerates consisting of many small particles. However, the sintered tiny particles can form hard agglomerates, and the particle size increases remarkably. The structures of the powders before and after sintering were identified by x-ray diffraction (XRD). The study of the electrical property of the powder shows that the powder is a metallic conductor. In a reducing atmosphere, the powder can be decomposed. When the powder is cofired with yttria-stabilized zirconia 5% (YSZ) powder at 1200 °C for 5 h, no new phase is produced, and the powder remains a single provskite hexagonal-rhombohedral structure.     

三聚氰胺粉料后处理工艺技术改造

经过技改后的三聚氰胺粉料后处理工艺，克服了以往采用螺旋输送机冷却和正压输送工艺所带来的工作环境恶劣、产品因温度较高而不易包装、机械故障频繁等许多难以解决的问题。改用吸送式气力输送后处理工艺后，既能输送，又能冷却、提纯三聚氰胺，实现自动化包装，并彻底改善工作环境。     

粉末涂料涂装工艺(Ⅰ)

介绍了粉末涂料的几种涂装方法及其原理、特点、应用范围和进展情况，重点介绍了静电粉末涂装方法。     

纳米TiO2复合铁钛防锈颜料的研制及产业化进展

介绍了纳米TiO2复合铁钛防锈颜料的制备原理、工艺、技术指标;描述了铁钛防锈涂料的配方、性能检验和产业化进展情况.     

真空粉末绝热低温贮罐制造的部分工艺方法

在真空粉末绝热低温贮罐的制造过程中、通过吸附器分子筛的活化、夹层真空系统的处理和充装珠光砂等工艺方法的改进,可较大地缩短产品的制造周期并提高产品的质量。     

非金属电镀用导电漆的研制

介绍了导电漆、作为导电填料的片状镀银铜粉的制备工艺流程。分别研究了漆膜表面单位电阻与镀银铜粉的含量及其粒径以及钛酸酯偶联剂的含量之间的关系。结果表明,当镀银铜粉的粒径为400目、质量分数在57%~65%之间,钛酸酯偶联剂的质量分数为10%时,所得涂膜的导电性能最佳。加入含C-18的油酸可以使导电漆长期贮存而电阻值不变。经检测,所得涂膜具有良好的性能:附着力1级,硬度1 H,柔韧性1 mm,冲击强度50 kg/cm2,膜厚10~15μm,漆膜表面每厘米电阻0.15Ω,每分米电阻0.47Ω。指出了导电漆应用过程中的注意事项。     

专用粉末涂料和涂装发展的新展望

新型专用粉末涂料以其涂膜超薄型化、低温固化和高耐候性等优势,并以预裁割坯料新工艺代替预涂装卷材工艺的新特点,将成为粉末涂料新的增长点。还提出了若干建议和意见。     

Development of design principles for a creep-limited alloy for turbine blades

Recent advancements in turbine-blade materials engineering are reviewed in light of general superalloy research and the author’s work on a new powder metallurgy IN-792 creep-limited alloy for application in blades of gas-turbine engines. The developed set of principles presented in this paper incorporates all the factors that must be taken into consideration in selecting and designing an alloy for turbine blades.     

湿法冶金制备的Ag—Pd合金粉末的固溶合金化研究

根据Ｘ射线衍射原理，建立湿法冶金固溶合金粉末的定量测定方法，可用于电子浆料合金粉末的检测，相对误差在±０．０１２５。