Research on graphite powders used for HTR-PM fuel elements

Different batches of natural graphite powders and electrographite powders were characterized by impurity, degree of graphitization, particle size distribution, specific surface area, and shape characteristics. The graphite balls consist of proper mix-ratio of natural graphite, electrographite and phenolic resin were manufactured and characterized by thermal conductivity, anisotropy of thermal expansion, crush strength, and drop strength. Results show that some types of graphite powders possess very high purity, degree of graphitization, and sound size distribution and apparent density, which can serve for matrix graphite of HTR-PM. The graphite balls manufactured with reasonable mix-ratio of graphite powders and process method show very good properties. It is indicated that the properties of graphite balls can meet the design criterion of HTR-PM. We can provide a powerful candidate material for the future manufacture of HTR-PM fuel elements.     

铜金粉的颜色及其影响因素

利用分光光度计对国内外铜金粉的颜色进行了测试，研究了铜金粉的成分、微观状态对颜色的影响。结果表明：铜金粉颜色可以用色彩三要素进行描述，其中铜金粉的色相只与合金成分有关，而与铜金粉片的大小、形状及粒度分布无关；明度和纯度与铜金粉片在油墨层中定向排列状态、片的大小、形状及粒度分布有关，而与成分无关；合金成分的微小波动不会引起铜金粉色相的明显改变。     

Mechanical activation-assisted electro-thermal explosion synthesis of the Ti2AlC phase

This study deals with the synthesis of the Ti₂AlC phase using the Electro-Thermal Explosion under Pressure with Confinement (ETEPC) technique. The effects of the ETEPC technique and the milling process parameters on the TiC_x phase content and the formation mechanism of the Ti₂AlC phase were investigated. The latter is mainly affected by the morphology of the powder mixture and aluminum melted amount. The optimization of the above parameters allowed the achievement of the desired reaction, leading to the formation of the Ti₂AlC phase with a purity of about 97?wt%. The results clearly demonstrate that the ETEPC process enables one to control both time and material synthesis temperature.     

Effect of polycarboxylate-type superplasticizer on the paste fluidity based on the water film thickness of flocs

The excess water film theory and the properties of flocs are integrated to examine the effect of the polycarboxylate-type superplasticizer on the paste fluidity.The theory states that excess water can surround the flocs rather than the particles and that the cell consists of a floc and a superficial water film.Experiments on limestone powder pastes were conducted to verify the theory.The superplasticizer dosage(sp%)and the water–powder ratio by volume(Vw/Vp)were systematically varied.A sedimentation balance method was used to measure the size distribution of the flocs in the limestone powder pastes.The water film thickness(WFT)of flocs was then calculated and shown to determine the paste fluidity.Based on this WFT of flocs,the effect of the sp on the paste fluidity was determined and then compared with the effect of water.     

中国(大陆)粉末冶金零件行业2004年进展

本文介绍了中国（大陆）粉末冶金零件行业2004年的生产概况与市场动向。阐述了粉末冶金汽车零件的市场动态。分析了中国（大陆）粉末冶金零件行业面临的挑战。介绍了美国APMI International的PMT认证。     

金属粉末注射成形粘结剂的发展

概括了金属注射成形粘结剂的功能与发展过程，并对几种典型粘结剂及其脱除工艺进行了适用性与经济性分析。     

尼龙-11粉末涂料

本文简要地介绍了我国粉末涂料的发展概况，并概述了热固性和热塑性粉末涂料的应用领域．文章重点介绍了尼龙－１１粉末涂料的优点及其制造法，阐述了其在管道防腐、船体防护和建筑行业等领域的应用     

碳酸铅纳米粉体的制备与表征

以醋酸铅和碳酸钠为原料 ,选择优化的工艺条件 ,用化学沉淀法制备分散性良好的碳酸铅纳米粉体。XRD和TEM分析表明 ,纳米碳酸铅属斜方晶系 ,其颗粒呈球形 ,粒度分布均匀 ,为5 0nm左右。