Bandwidth allocation algorithms for weighted maximum rate constrained link sharing policy

This paper addresses the problem of bandwidth allocation under the weighted maximum rate constrained link sharing policy and proves a key theory in the condition of allocation termination. We propose several algorithms with various worst-case and average-case time complexities, and evaluate their computation elapse times.     

高速连续数据记录系统中双页缓存的设计和实现

在高速连续数据记录系统中，存储设备需要速度匹配单元来实现高速连续数据记录，文章讨论了双页缓存在高速连续记录系统中的作用，并以实际开发的记录系统为例，详细介绍了双页缓存的设计和实现。     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

HDPE的耐磨蚀性与抗冲击性的研究

用自制的旋臂式磨蚀实验仪，研究了５种高密度聚乙烯和１种顺丁橡胶改性的高密度聚乙烯，在铁尾矿和铁精矿浆体中的耐磨蚀性。耐磨蚀性最差的是ＨＤＰＥ２２００Ｊ，耐磨蚀性较差的是ＨＤＰＥ６３００Ｍ；ＨＤＰＥ５０００ｓ，６０９８和２４８０的耐磨蚀性较好；ＨＤＰＥ／ｃｉｓ－ＢＲ的耐磨蚀性最好。     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Inverse Analysis of Axisymmetrical Compression of HSLA Steel

The objective of the present work is to further explore the problem of selection of the flow stress function which will give the best agreement with experiments for a wide range of the Zener‐Hollomon parameter. Analysis of various flow stress functions was performed, with particular emphasis on the Zerilli‐Armstrong model. Inverse analysis was successfully applied to identify the flow stress model for microalloyed steels deformed in ferrite, two‐phase and austenite regions. Inverse method is applied to interpret the results of the axisymmetrical compression tests performed for HSLA steel samples on a Gleeble 3800 and Split Hopkinson Pressure Bar. Sensitivity analysis is performed based on local and global methods. The objective of the sensitivity analysis in the present study is the evaluation to what extent the selected coefficients in the rheological model influence the result of simulations. In the considered tests this result is represented by two dependent variables, the load and the shape of the sample (barrelling). It is confirmed that the Zerilli‐Armstrong equations should be applied at very high strain rates. Physical meaning is an advantage of this model. Difficulties with identification are the main disadvantage.     

20CrMo棒材带状组织的控制研究

通过Gleeble-1500热模拟机对20CrMo轧材精轧阶段轧制过程及冷却过程的模拟,研究了终轧温度、冷却速度对室温组织的影响,分析了形成带状组织的条件,最终得出了理想室温组织的终轧温度和冷却速度。     

PROPAGATION OF GASLESS COMBUSTION FRONTS: NONZERO REACTION RATE IN THE WHOLE DOMAIN

This paper deals with the gasless combustion problem in an infinite one-dimensional medium. The possibility of the existence of steadily propagating reaction waves is stated for system models with nonzero reaction rates everywhere but at the boundaries. Two forms for the chemical reaction rate dependence on the temperature are considered: the classical Arrhenius, and a modified Arrhenius incorporating and ignition temperature. The equations for the steadily propagating waves are studied in the phase-plane of the temperature and its derivative. The analysis first addresses the question of whether steadily propagating waves are admissible. Then bounds for the propagation velocity are sought and found. The results of the closed-form analysis are successfully tested against numerical experiments. Non-steady propagation regimes are also found, and regions in the parameter space associated with different asymptotic dynamical behaviour are identified.