一种通用型的目标数据仿真

给出了一种通用型的雷达目标模拟器 ,它能够方便直观的产生各种特征的三维目标轨迹 ,可实时离散出目标点迹 ,为雷达数据处理及精度分析提供数据来源。目标轨迹由一组特征点定义 ,修改方便 ,应用灵活     

Allocentric Versus Egocentric Spatial Memory After Unilateral Temporal Lobectomy in Humans.

Thirty patients who had undergone either a right or left unilateral temporal lobectomy (14 RTL; 16 LTL) and 16 control participants were tested on a computerized human analogue of the Morris Water Maze. The procedure was designed to compare allocentric and egocentric spatial memory. In the allocentric condition, participants searched for a target location on the screen, guided by object cues. Between trials, participants had to walk around the screen, which disrupted egocentric memory representation. In the egocentric condition, participants remained in the same position, but the object cues were shifted between searches to prevent them from using allocentric memory. Only the RTL group was impaired on the allocentric condition, and neither the LTL nor RTL group was impaired on additional tests of spatial working memory or spatial manipulation. The results support the notion that the right anterior temporal lobe stores long-term allocentric spatial memories. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

多传感器目标的模糊识别

根据模糊理论，采用信息融合技术和模糊识别技术，讨论了在多类传感器网内进行多目标模糊识别的一般原理和方法。     

T8钢－聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性、磨料磨损特性及对土壤的减粘降阻性能与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％～２２．２７％     

δ－Al_2O_3纤维／Al－12Si复合材料室温拉伸强度分析

对δ－Ａｌ２Ｏ３纤维／Ａｌ－１２Ｓｉ复合材料室温拉伸强度的分析表明，在实验条件下该复合材料存在δ－Ａｌ２Ｏ３纤维的最小体积分数Ｖｍｉｎ和临界体积分数Ｖｃｒｉｔ，并求出其基体强度σ＇ｍ和室温强度σｃ－δ－Ａｌ２Ｏ３纤维体积分数Ｖｆ直线方程及纤维的临界长度ｌｃ和复合材料的剪切应力τｉ．确定复合材料的ＲＯＭ预测曲线，应首先判断σ＇ｍ是否等于未增强合金的强度σｕｍ才能得出正确的结论     

海湾战争后防空系统及雷达电子设备的新发展

本文针对海湾战争后的新形势,介绍了战略防御的新构想、战术防空导弹系统及21世纪的防空概念,论述了AEW、AWACS、战场监视目标攻击雷达及其它雷达的最新发展情况,此外,还对国外的反隐身技术进展情况作了介绍。     

Microstructure-Property Correlation in AI_4C_3 Dispersion Strengthened Al Composite

The microstructure and tensile properties of Al_4C_3 dispersion strengthened Al composite fabricatedby reaction milling technique were investigated.It is indicated that the rod-like Al_4C_3 dispersoidshaving a diameter of 0.02-0.03 μm and a length of 0.1-0.3μm are formed by reaction of C with Al,and uniformly distributed in the Al matrix.The interface between Al_4C_3 and Al is clean and theinterfacial bonding is good.The matrix consists of the subgrains which have the size of 0.3-0.4μm,and most of the Al_4C_3 dispersoids are distributed on the subgrain boundaries.The 11 vol.-%Al_4C_3/Al composite exhibits an UTS (ultimate tensile strength) of 400 MPa and anelongation-to-failure of 8.0%.     

压型钢板组合楼板承载力的有限元分析

压型钢板组合楼板是 2 0世纪发展起来的一种新型结构形式。它具有显著的优势 ,如轻质、高强 ,施工快捷等 ,将在未来的建筑领域中大有作为。组合楼板的承载力主要取决于钢板 -混凝土界面处的抗剪强度。建立了一个二维有限元模型来研究单向组合板的性能。并将计算结果与试验数据进行对比 ,验证了模型的有效性     

原位插层聚合制备PVC/蒙脱土纳米复合材料

采用氯乙烯单体直接插层到蒙脱土中进行原位插层聚合，制备纳米复合材料，并用小角X射线衍射（XRD）、扫描电子显微镜（SEM）和电子探针技术对复合材料进行了结构表征。实验结果表明：采用原位插层聚合法制得的PVC／蒙脱土（MMT）复合材料为剥离型纳米复合材料。     

三维连通网络陶瓷的电磁特性Ⅱ电磁参数的影响因素

通过对具有不同骨架L径、陶瓷浆料组分在不同温度下烧结的三维连通网络陶瓷的电导率和电磁参数的测量,研究了对这种网络结构材料电磁参量的影响因素.结果表明,当三维连通网络陶瓷的电导率为10-4＜σ＜101S/cm时,其电损耗及感应磁损耗较大.三维连通网络陶瓷在高温下有较大的介电损耗特性,使其成为耐高温电吸波材料的理想选择.