Gas particle industrial flow simulation using RANSTAD

A turbulent gas particle finite-volume flow simulation of a representative coal classifier is presented. Typical values of the loading ratio permit a one-way coupling analysis. As a case study, the computational fluid dynamics code,ranstad, and the modelling aspects are discussed in some detail. The simulation indicates that small (≈ 30 μm) coal particles pass through the classifier to the furnace but that large (≈ 300 μm) particles are captured and remilled. The computational simulation indicates that the classifier performance can be improved by internal geometric modification. The commitment of the Electricity Commission of New South Wales (Pacific Power) to the exploitation of Computational Engineering for the improvement of all aspects of electricity generation is acknowledged.     

基于CFD的新型结构静压油垫数值仿真技术

为了提高重载数控机床静压转台的承载能力和油膜刚度,提出了一种具有多环形流道油腔和阻尼型封油边结构的新型静压油垫,并对其性能进行了研究.在对静压油垫结构优化设计的基础上,利用CFD(computationalfluid dynamics)数值仿真技术,采用二维轴对称流动模型对新型结构静压油垫的流场特性进行了仿真分析,得到了新型静压油垫的内部流场特性,计算出油垫的承载能力和油膜刚度,并与单腔体、单平面封油边结构的静压油垫进行了对比.研究表明:新型静压油垫能通过在阻尼流道和阻尼槽内形成紊流,增加流动液阻,实现压力增益,并可在阻尼槽处产生局部静压效应,从而使新型结构静压油垫的承载能力和油膜刚度较传统结构静压油垫有所提高;此外,采用CFD技术有助于对复杂结构的静压油垫进行优化设计与性能计算,从而提高设计效率和计算准确性.     

复合材料尖削结构同级优化方法研究及ISIGHT实现

现有复合材料优化方法在进行尖削结构优化时,设计变量多而且难以保证纤维的连续性,文章提出了一种基于尖削结构模型的复合材料的同级优化方法。通过引入了铺层组、铺层组厚度、铺层组铺层顺序和铺层组距离变量等参数,在不影响优化结果的同时能有效的减少设计变量个数,并保证纤维的连续性。文章借助商业软件ISIGHT实现了该同级优化方法,采用某层合板优化问题验证了该方法的有效性。     

基于线性回归分析的视频质量评估方法

文章提出了一种利用线性回归分析方法的无参考视频序列质量评估算法。该算法主要利用帧间编码帧的比特数和该帧与其参考帧的差异两个参数进行线性回归分析来评估视频质量。该方法不需要原始参考视频,算法简单。通过对标准视频序列的仿真实验,该算法可有效评价不同视频的编码质量,使用该质量评估方法测得的失真视频客观质量评分与其主观质量评分有很好的一致性。     

FIR滤波在嵌入式系统中的实现与优化

介绍FIR滤波器的基本原理以及满足线性相位的条件,阐述了FIR滤波器的生成.从MATLAB得到的滤波器实现了在嵌入式中的移植,并进行了计算优化.通过对含有噪声的数据处理结果表明,该方法在工程实践中能满足要求.     

Some variants of the Chebyshev–Halley family of methods with fifth order of convergence

In this paper we present some techniques for constructing high-order iterative methods in order to approximate the zeros of a non-linear equation f(x)=0, starting from a well-known family of cubic iterative processes. The first technique is based on an additional functional evaluation that allows us to increase the order of convergence from three to five. With the second technique, we make some changes aimed at minimizing the calculus of inverses. Finally, looking for a better efficiency, we eliminate terms that contribute to the error equation from sixth order onwards.

The paper contains a comparative study of the asymptotic error constants of the methods and some theoretical and numerical examples that illustrate the given results. We also analyse the efficiency of the aforementioned methods, by showing some numerical examples with a set of test functions and by using adaptive multi-precision arithmetic in the computation.     

考虑避碰约束的编队卫星入网路径规划

提出了一种新的考虑避碰约束的编队卫星入网路径规划策略。首先通过常规编队卫星入网的多脉冲线性规划方法,得到一组卫星入网的脉冲序列,以此预测轨道机动过程中各星之间的最小距离,当最小距离小于安全距离时,将最小距离前后脉冲施加时刻的相对位置作为约束条件,重新规划卫星入网轨迹,迭代进行直到满足避碰要求。仿真结果表明,该方法由于减少了路径规划过程中约束条件的个数,能够快速地规划出考虑避碰约束时的编队卫星入网轨迹,且有效节省燃料消耗。     

Combustion and energy balance of aluminum holding furnace with bottom porous brick purging system

For acquiring the details in aluminum holding furnace with bottom porous brick purging system, efforts were performed to try to find out the potential optimal operation schemes. By adopting transient analysis scheme and constant boundary temperature, combustion in the furnace was investigated numerically using computational fluid dynamics (CFD). The predicted gas temperature shows good agreement with the measured results, and the predicted energy distribution of the furnace is consistent with that obtained from energy balance experiment, which confirms the reliability of the numerical solution. The results show that as the fuel-air mixture temperature rises up from 300 K to 500 K, the energy utilization of the furnace could increase from 34.55% to 37.14%. However, as the excess air coefficient increases from 1.0 to 1.4, energy utilization drops from 34.55% to 29.56%. Increasing the combustion temperature is the most effective way to improve the energy efficiency of the furnace. High reactant temperature and medium excess air coefficient are recommended for high operation performance, and keeping the furnace jamb sealed well for avoiding leakage has to be emphasized.