镍基单晶合金枝晶典型区域相成分最优化测算法

建立了用于测算镍基单晶高温合金枝晶典型区域相成分的最优化数学模型.根据电子探针对枝晶典型区域成分的测定结果,运用BFGS拟Newton法及CONSTR约束优化算法,可以计算枝晶各典型区域中γ和γ＇相成分.以镍基单晶合金CMSX-2和CMSX-4为对象,对优化测算结果进行了分析,证实了该方法的可行性.     

热处理对铁铝涂层相组成及滑动磨损性能的影响

采用粉芯丝材和高速电弧喷涂技术得到的铁铝金属间化合物涂层 ,研究了 5 5 0℃和 80 0℃热处理对涂层相组成及滑动磨损性能的影响。结果表明 ,涂层的主要组成相是铁铝金属间化合物 (FeAl和Fe3 Al)和α Fe ,另有少量的Al2 O3 和Al。热处理后 ,一部分Fe3 Al将转变成FeAl,对涂层的显微硬度有明显的影响。剥层磨损是铁铝涂层的主要磨损机理。通过热处理提高涂层的显微硬度 ,将有利于提高涂层的耐磨性     

Bi—Pb—Sr—Ca—Cu—O系相关系研究的最新进展

围绕给Ｂｉ系超导材料研究提供必要的信息，综述了１９９１年以来Ｂｉ－Ｐｂ－Ｓｒ－Ｃａ－Ｃｕ－Ｏ系相关系研究的最新结果。主要包括Ｃａ－Ｃｕ－Ｏ三元系，Ｓｒ－Ｃｕ－Ｏ三元和纱，Ｂｉ２Ｏ３－ＣｕＯ伪二元系，（Ｂｉ，Ｐｂ）２Ｓｒ２ＣｕＯｘ－ＣａＣｕＯ２伪二元系，Ｂｉ２Ｏ３－ＣａＯ－ＣｕＯ伪三元系，Ｂｉ２Ｏ３－ＳｒＯ－ＣａＯ伪三元系，Ｂｉ２Ｏ３－ＳｒＯ－ＣｕＯ－ＭＯ（Ｍ为Ｃａ，Ｐｂ）伪四元系。此外，还讨论了与     

RELATIONSHIP BETWEEN PRIMARY MORPHOLOGY AND CRYSTAL STRUCTURE OF CARBIDES GROWING IN SUPERALLOYS

The SEM analysis of decply etched specimens of Ni-base superalloys K38 and K19H+Ta in-dicates that both the primary morphologies under normal growth conditions and the finalmorphologies near equilibrium of MC carbides are octahedral blocks.The classification ofMC crystal faces by means of PBC(Periodic Bond Chains)theory confirms that{100},{110}and{111}are F faces,and that{212}are S faces.The calculations of the attachmentenergy for each F face show that{111}are most easily appeared.It has also been inferred thatone of the MC growth units is a coordination octahedron composed of one metal atom sur-rounded by six carbon atoms.The octahedral growth units can be attached to the growth sur-faces of MC carbides through laver stacking mechanism on the{111}faces.     

CYCLIC DEFORMATION OF FACE CENTERED CUBIC CRYSTALS AND ITS DISLOCATION INTERACTION MODEL——Ⅱ.DISLOCATION INTERACTION MODEL OF CYCLIC DEFORMATION

A dislocation interaction model has been proposed for cyclic deformation of fcc crystals.Ac-cording to this model,cyclic stress-strain responses and saturation dislocation structures of acrystal are associated with the modes and intensities of dislocation interactions between slipsystems active in the crystal; and,hence,may be predicted by the location of its tensile axis inthe crystallographic triangle.This model has successfully explained the different behaviours ofdouble-slip crystals and multi-slip behaviours of some crystals with orientations usually con-sidered as single-slip ones.     

Pb-Free solders: Part II. Application of ADAMIS database in modeling of Sn−Ag−Cu alloys with Bi additions

The ADAMIS database was used for calculation of the surface tension of the quaternary Sn−Ag−Cu−Bi liquid alloys by Butler's model. The resultant data were compared with those from the maximum bubble pressure measurements from Part I. The same thermodynamic database was next applied for the calculation of various phase equilibria. It was established that the Bi addition to the ternary Sn−Ag−Cu alloys (Sn-2.6Ag-0.46Cu and Sn-3.13Ag-0.74Cu in at.%; Sn-2.56Ag-0.26 Cu and Sn-2.86Ag-O.40Cu in mass%) causes lowering of the melting temperature and the surface tension to make the tested alloys closer to, traditional Sn−Pb solders. The simulation of the solidification by Scheil's model showed that the alloys with the higher Bi concentration are characterized by the lifting-off failure due to the segregation of Bi at the solder/substrate boundary. Thus, in modeling of new Pb-free solders, a compromise among various properties should be taken into consideration.     

反射衰减诊断激光光束的应用分析

介绍了普通光学元件反射诊断激光光束的应用,提出了利用平面平晶的平面反射进行光能衰减,详细论述了采用该方法进行光能衰减的可行性,分析了平面平晶反射衰减中反射光S偏振态和P偏振态能量的差异,对激光束诊断的影响和解决方法,结合半导体绿激光器的光束诊断进行了应用分析。实验证明,该方法结构简单、调整方便、误差小,利用普通平面平晶反射衰减即可满足激光强度的匹配要求,实现了待测激光束无失真取样,达到很好的测试效果。     

单变量时间序列相空间重构及应用研究

以连扎机组动力系统中的液压泵为研究对象,根据Takens延时法对单变量时间序列进行相空间重构,用G-P算法计算时间序列的关联维数,研究了时间延迟和嵌入维数的取值范围,分析了关联维数与复杂系统动态变化之间的关系,并给出了初步的诊断分析,取得了初步成效.     

镧离子注入对纯锆抗高温氧化性能的影响

对纯锆表面注入了1×10~(16)ions/cm~2～1×10~(17)ions/cm~2的镧离子,并在500℃条件下进行了空气氧化增重研究。用XPS分析了注入的镧、锆的价态;用AES分析了镧锆氧三元素的深度分布;用0.3°小角X光掠射(GAXRD)分析了高温氧化时氧化锆的相转变。结果表明,纯锆表面注入La离子后,其抗高温氧化性能显著提高,且注入剂量越大效果越强,注入氧化膜以La_2O_3和ZrO_22种形式存在;由于La离子的注入,促使形成大量四方相氧化锆(t-ZrO_2),而且减少四方相氧化锆(t-ZrO_2)向单斜相氧化锆(m-ZrO_2)的转变,这是纯锆氧化速率降低的根本原因。     

强变形诱导析出相回归后的再时效行为

利用透射电镜和硬度测量实验手段,研究了强变形诱导析出相回归后的合金在再时效过程中的组织、性能变化.发现:多相合金Al-Zn-Mg-Cu经固溶、时效处理后,析出相粒子在强变形过程中破碎细化并可重新回归于基体内.强变形导致回归后的合金在再时效处理时可再次沉淀析出第二相粒子,但析出相的析出顺序与强变形后合金的晶粒尺有相关,当晶粒细化到某一临界尺寸以下时,析出顺序发生改变,非均匀形核的平衡相可抑制GP区、η亚稳相等前期粒子的析出.