基于遗传算法的图像边缘信息链表匹配技术

提出了一种基于遗传算法的图像边缘信息链表匹配方法。首先,采用CANNY算子的方法提取图像边缘;然后,将图像边缘信息链表化;最后,基于链表化结果利用遗传算法进行链表匹配。该方法能够减少匹配过程中的计算量,且能实现高效匹配。通过仿真实验,验证了该方法的性能。     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

有机电沉积涂料的新动向

阴极电沉积涂料是 2 0世纪 70年代以来发展起来的一种新的涂装方法 ,具有挥发性有机物 (VOCs)和有害空气污染物(HAPs)含量低、防蚀能力强、漆膜质量好、涂料利用率高、适合涂装结构复杂的构件和设备等特点。介绍了近年来阴极电沉积涂料研发的新动向。它们主要集中在有机双层电涂和高分子 聚电解质 /低聚物电解质复合物多层电涂体系 ,这些新的电涂体系在涂料的稳定性以及涂层的物理化学性质和力学性能方面具有明显的改进。     

Low-resistance polysilicon process in contact application for high density devices

For the lowest resistance, it is required to have the epitaxial silicon contact between the silicon plug and the substrate and good step coverage at the high aspect-ratio contact holes, simultaneously. In this work, a double polysilicon (DPS) deposition technique was proposed for the requirements. The first, thin silicon layer is deposited in a single-wafer process chamber with an in-situ H₂-RTP (rapid thermal process) treatment for the epitaxial contact, and the second silicon layer is formed in a batch-type furnace for good step coverage. From chain resistance, Kelvin R_c, and current-voltage (I–V) measurement, the DPS process meets both low resistance and good uniformity, so that it suggests a breakthrough in the small-sized, semiconductor device application.     

EXPERIMENTAL RESEARCH ON RADIATION FROM DOUBLE CYLINDRICAL STRUCTURES

1. INTRODUCTION Induced by unbalanced mechanical forces and moments, underwater structures vibrate and radiate The main form of underwater structures, such a submarine, is reinforced double cylindrical structure immersed in water, with fluid media filled between th double cylindrical shells. In essence, this is a coupling problem between fluid and structure. Multipl methods have been used to estimate radiation leve from underwater structures[1-9]. Musha[10] and Chertock[11] estimate the …     

NUMERICAL STUDY ON SORET-EFFECT AND DUFOUR-EFFECT FOR DOUBLE-DIFFUSIVE NATURAL CONVECTION IN POROUS ENCLOSURE

The influences of Soret effect and Dufour effect on the natural convection and heat and mass transfer for a porous enclosure were investigated by means of the penalty finite element method. Numerical results indicate that the Soret and Dufour effects have significant influences on heat and mass transfer in the presence of large temperature gradient and concentration gradient.     

图像边缘检测在关节镜图像处理中的应用

主要论述了采用图像边缘检测和图像跟踪算法对采集的关节镜图像进行图像处理和分析的过程。在图像处理的基础上，系统自动测量出指定目标的形状参数，实现了系统的测量要求。本研究为实现关节镜手术过程图像的保存和手术的准确性提供了可行的方法。     

C60高性能预拌混凝土的生产及应用

介绍了C60高性能预拌混凝土的研制及生产应用的过程与方法 ,对材料的性能、搅拌工艺进行了深入分析 ,为生产高强高性能混凝土提供了详细的思路     

GJ5×2双槽剥片机及其在高岭土剥片中的应用

GJ5×2大型双槽剥片机是国内超细物料加工中最新出现的超细磨/剥片设备,也是目前国内这一领域内最大规格的设备,已成功应用于煤系硬质高岭土剥片中,单机能力可达1.5～2.0t/h,产品细度可达小于2μm颗粒占85%～90%。