Effect of Fe on the high temperature oxidation of TiAl alloys

An alloy of 51.23Ti−48.73Al−0.4Fe (at.%) was oxidized at 800, 900 and 1000°C in air to determine the effect of Fe on oxidation. The scales formed consisted of an outer TiO₂ layer, an intermediate Al₂O₃ layer, and an inner mixed (TiO₂ Al₂O₃) layer, typical of conventional TiAl alloys. A small amount of dissolved Fe ions was weakly segregated in the outer TiO₂ layer and also in the inner (TiO₂−Al₂O₃) mixed layer. Ti₂AIN and TiN were detected in the scale in some instances. A thin, oxygen-affected Ti₃Al sublayer formed at the oxide-substrate interface. The overall oxidation kinetics and the scale morphology were not affected by Fe-addition.     

用微量元素涂料改善球铁件热节组织的试验研究

对RE、Tc、Bi、Sb等微量元素以涂料形式对球铁件厚大热节部位进行微合金化,以改善其组织的可能性进行了试验研究,结果表明:多元微量元素涂料可有效地消除碎块状石墨,提高球化率,改善球铁组织,涂料层厚度影响微合金化程度而应严格控制,该工艺具有简便。无炉料污染、可代替冷铁以确保复杂铸件组织均一等优点。     

多系列铸铁光电发射光谱标准样品的研制

采用中频炉熔炼，用自行设计的多孔隔离式金属型和独特的补缩和浇注系统及临界激冷工艺进行浇铸，成功地研制出了带有高低标的铸铁系列多元素光电光谱分析标样。对标样的白口化程度、均匀性、呈线性分布及分析精度等进行了检测并得出可行性结论。     

全封闭大功率永磁牵引电机的温度场数值计算

为研究全封闭大功率永磁牵引电机额定工况下的稳态温度场,以一台额定功率为815 kW的永磁同步牵引电机为研究对象,依据成型绕组槽部导热模型,建立了整机三维温度场共轭传热计算模型。考虑旋转磁化、冲压过程和磁密高阶谐波对定子铁耗的影响,以及水套-定子铁心间接触热阻抗对电机温升的影响,采用Fluent软件对电机额定工况下的稳态流场与温度场求解,使用电阻法和埋置检温计法（ETD）测得电机在额定工况下绕组的平均温升、铁心测点和绕组端部测点局部温升,绝对误差分别为-3.7 K、-0.3 K和7.6 K。进一步分析了电机水路和内风路流场分布特性、水套-定子铁心间接触间隙对绕组平均温升的影响以及槽内绕组附近的温升分布情况,最后提出了该类电机冷却系统设计优化方向。     

The Esterase PfeE,the Achilles’ Heel in the Battle for Iron between Pseudomonas aeruginosa and Escherichia coli

Bacteria access iron, a key nutrient, by producing siderophores or using siderophores produced by other microorganisms. The pathogen Pseudomonas aeruginosa produces two siderophores but is also able to pirate enterobactin (ENT), the siderophore produced by Escherichia coli. ENT-Fe complexes are imported across the outer membrane of P. aeruginosa by the two outer membrane transporters PfeA and PirA. Iron is released from ENT in the P. aeruginosa periplasm by hydrolysis of ENT by the esterase PfeE. We show here that pfeE gene deletion renders P. aeruginosa unable to grow in the presence of ENT because it is unable to access iron via this siderophore. Two-species co-cultures under iron-restricted conditions show that P. aeruginosa strongly represses the growth of E. coli as long it is able to produce its own siderophores. Both strains are present in similar proportions in the culture as long as the siderophore-deficient P. aeruginosa strain is able to use ENT produced by E. coli to access iron. If pfeE is deleted, E. coli has the upper hand in the culture and P. aeruginosa growth is repressed. Overall, these data show that PfeE is the Achilles’ heel of P. aeruginosa in communities with bacteria producing ENT.     

"古代大型铁铸文物"系列文章之八古代大型铁塔和古塔的大型铁塔刹

叙述了我国古代铁塔的由来和现况，介绍了11个古代铁塔的名称、高度、铸造年代和特点，并阐述了古代铁塔的铸造工艺。同时，还介绍了若干古塔顶上的大型铁塔刹的有关情况。     

"我国古代大型铁铸文物"系列文章之四古代大铁牛

叙述了我国古代大铁牛的用途和概况，介绍了著名的唐铁牛以及宋、明、清时期“镇水铁牛”的情况及其铸造特点。     

碳化物在高铬铸铁高应力磨料磨损中的影响

对不同载荷作用下的高铬铸铁在耐磨实验机上进行了磨料磨损试验;对在不同的碳化物对基体的保护作用与碳化物的剥离进行了相关的分析.结果表明载荷在一定值以下磨损较为缓慢,当载荷超过一定值时,磨损急剧加剧,随着载荷的增加"尺寸较小"的碳化物首先剥离基体,当载荷继续增大时,"尺寸较大"的碳化物也剥离基体并有碎裂现象.这要求高铬铸铁中的碳化物不仅要分布均匀,碳化物的尺寸也要合适.     

灰铸铁几个关键技术问题的探讨

对灰铸铁熔炼中的几个关键问题进行探讨：1）锰、硫对灰铸铁力学性能及切削加工性能的影响；2）硬质点颗粒对断屑性能的影响；3）时效处理对高速切削时刀具寿命的影响；4）如何减小高强度灰铸铁的收缩倾向；5）如何生产HT350及更高牌号的灰铸铁。     

铈对中铝耐热铸铁抗氧化性能的影响

采用氧化增重法测定了含Ce中铝耐热铸铁在850℃时氧化动力学曲线，用SEM，X－ray对氧化膜表面的形貌，结构及氧化层－基体界面进行了观察分析，结果表明：Ce改变了中铝耐热铸铁氧化膜的结构和组成，提高了中铝耐热铸铁的抗氧化性能。