Finances and Well-Being: A Dynamic Equilibrium Model of Resources.

This study of 513 Dutch farmers tested a dynamic equilibrium model of resources (an extension of the conservation of resources theory; S. E. Hobfoll, 1989, 1998, 2001). With structural equation modeling, the advantages of a 3-wave longitudinal design were comprehensively used, such as addressing bidirectional causal effects and within-individual vs. between-individual change. This allowed for a careful analysis of the management function of resources in the stress process. Results showed that well-being had stronger within-person stability than finances. Increased levels of financial problems temporarily increased psychological distress but not self-reported illness. Conversely, farmers with higher stable baselines of psychological distress also had higher baselines of self-reported illness and experienced more negative changes in their financial situation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

动态模糊神经网络在大坝变形预报中的应用

针对静态模糊神经网络的局限性,提出了在线动态建模的模糊神经网络方法.当新增样本进入训练集之后,根据新样本对模型的贡献大小,在已有模型的基础上进行动态修正,这样可以减少建模的计算时间.新方法实现了增加样本而矩阵阶数不增加,避免了矩阵求逆运算,理论上可以提高计算效率.实例表明动态模糊神经网络方法是可行的,可实现持久预报,具有较强的适应能力和较高的预报精度,可应用于在线实时变形预报及相关领域.     

An efficient heuristic for scheduling batches of parts in a flexible flow system

Flexible manufacturing systems (FMSs) are a class of automated systems that can be used to improve productivity in batch manufacturing. Four stages of decision making have been defined for an FMS—the design, planning, scheduling, and control stages. This research focuses on the planning stage, and specifically in the area of scheduling batches of parts through the system.The literature to date on the FMS planning stage has mostly focused on the machine grouping, tool loading, and parttype selection problems. Our research carries the literature a step further by addressing the problem of scheduling batches of parts. Due to the use of serial-access material-handling systems in many FMSs, the batch-scheduling problem is modeled for a flexible flow system (FFS). This model explicitly accounts for setup times between batches that are dependent on their processing sequence.A heuristic procedure is developed for this batch-scheduling problem—the Maximum Savings (MS) heuristic. The MS heuristic is based upon the savings in time associated with a particular sequence and selecting the one with the maximum savings. It uses a two-phase method, with the savings being calculated in phase I, while a branch-and-bound procedure is employed to seek the best heuristic solution in phase II. Extensive computational results are provided for a wide variety of problems. The results show that the MS heuristic provides good-quality solutions.     

A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

稀疏气泡流动的粒子跟踪测速技术研究

采用动态阈值技术实现了对气泡图像的正确分割，利用灰度加权方法提高了气泡颗粒的定位精度。根据稀疏气泡流动图像的特点，提出了一种新的基于相关的粒子跟踪测速算法（2-HPTV）。通过进行两时刻中围绕待研究气泡所取的两个小的诊断窗口的相关运算，成功实现了气泡颗粒的轨迹追踪。实验表明本文算法较传统的PIV技术在测速精度上有很大程度的提高，与4帧粒子跟踪测速算法相比，降低了对摄像机帧频的要求，具有较强的实用性。     

Development and simulation studies of an unsteady state biofilter model for the treatment of cyclic air emissions of an α‐pinene gas stream

This paper describes the development and simulation of an unsteady state biofilter model used to predict dynamic behaviour of cyclically‐operated biofilters and compares it with experimental results obtained from three, parallel, bench‐scale biofilters treating both periodically fluctuating concentrations and constant concentrations of an α‐pinene‐laden gas stream. The dynamic model, using kinetic parameters estimated from the constant concentration biofilter, was able to predict the performance of cyclic biofilters operating at short cycle periods (ie, in the order of minutes and hours). Steady state kinetic data from a constant concentration biofilter can be used to predict unsteady state biofilter operation. At a 24 h cycle period, the dynamic model compared well with experimental results. For long cycle periods (ie, hours and days), removal efficiency decreased after periods of non‐loading: the longer the period of non‐loading, the poorer the biofilter's performance at the re‐commencement of pollutant loading. At longer time scales the model did not effectively predict transient behaviour, as adsorption and changes in kinetic parameters were not accounted for. Modelling results showed that similar biofiltration performance for the cyclic and constant concentration biofiltration of α‐pinene is expected for biofilters operating solely in the first order kinetics regime. Poorer performance for cyclic biofilters following Monod kinetics spanning the entire kinetics range is expected as the cycle amplitude increases. The most important parameters affecting the performance of a cyclically‐operated biofilter with short cycle periods are: amplitude of cyclic fluctuations, C_{g, max}/C_g, relative value of the half‐saturation constant in the Monod expression, K_s, and effective diffusivity of α‐pinene in the biofilm, D_e. Copyright © 2005 Society of Chemical Industry     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

Fast dynamic casting

We describe a scheme for implementing dynamic casts suitable for systems where the performance and predictability of performance is essential. A dynamic cast from a base class to a derived class in an object‐oriented language can be performed quickly by having the linker assign an integer type ID to each class. A simple integer arithmetic operation verifies whether the cast is legal at run time. The type ID scheme presented uses the modulo function to check that one class derives from another. A 64‐bit type ID is sufficient to handle class hierarchies of large size at least nine levels of derivation deep. We also discuss the pointer adjustments required for a C++ dynamic_cast. All examples will be drawn from the C++ language. Copyright © 2005 John Wiley & Sons, Ltd.     

Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper is to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s ^-1>, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle materials is attempted. The design of a measurement system, which realizes computer acquisition, analysis, and graphic representation of data, is also presented.     

抽水蓄能电站备用效益研究综述

随着电力体制改革及电力系统的不断完善,抽水蓄能电站在电力系统中的动态作用越来越显著,但如果其动态作用体现的价值得不到合理的收益,将严重影响抽水蓄能电站自身的财务生存能力。通过对抽水蓄能电站动态效益的主要组成部分——备用效益进行的研究,对抽水蓄能电站承担备用容量的特点以及备用效益的研究现状、量化理论及方法进行的综合分析,为抽水蓄能电站动态效益的合理量化提供了参考依据。