200 万t链箅机-回转窑球团生产线快速达产实践

介绍了邯钢200万t链箅机-回转窑酸性氧化球团生产线的工艺特点和主要设备,以及建成投产后试生产的有关情况。通过周密的部署和安排,该生产线实现了40天快速达产的目标。     

国内外压力容器标准对射线透照检测要求的对比分析

对欧美压力容器标准与GB 150—1998中对射线透照检测要求进行了对比分析,并结合中国的压力容器标准及行业发展现状,对GB 150—1998标准中相应条款提出了修订建议。     

A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

Development and simulation studies of an unsteady state biofilter model for the treatment of cyclic air emissions of an α‐pinene gas stream

This paper describes the development and simulation of an unsteady state biofilter model used to predict dynamic behaviour of cyclically‐operated biofilters and compares it with experimental results obtained from three, parallel, bench‐scale biofilters treating both periodically fluctuating concentrations and constant concentrations of an α‐pinene‐laden gas stream. The dynamic model, using kinetic parameters estimated from the constant concentration biofilter, was able to predict the performance of cyclic biofilters operating at short cycle periods (ie, in the order of minutes and hours). Steady state kinetic data from a constant concentration biofilter can be used to predict unsteady state biofilter operation. At a 24 h cycle period, the dynamic model compared well with experimental results. For long cycle periods (ie, hours and days), removal efficiency decreased after periods of non‐loading: the longer the period of non‐loading, the poorer the biofilter's performance at the re‐commencement of pollutant loading. At longer time scales the model did not effectively predict transient behaviour, as adsorption and changes in kinetic parameters were not accounted for. Modelling results showed that similar biofiltration performance for the cyclic and constant concentration biofiltration of α‐pinene is expected for biofilters operating solely in the first order kinetics regime. Poorer performance for cyclic biofilters following Monod kinetics spanning the entire kinetics range is expected as the cycle amplitude increases. The most important parameters affecting the performance of a cyclically‐operated biofilter with short cycle periods are: amplitude of cyclic fluctuations, C_{g, max}/C_g, relative value of the half‐saturation constant in the Monod expression, K_s, and effective diffusivity of α‐pinene in the biofilm, D_e. Copyright © 2005 Society of Chemical Industry     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

利津地区深层沙三、沙四段油藏测试评价

利用测试资料，将利津地区深层沙三、沙四段油藏分为5种油藏类型：①高压、低-极低渗、导数曲线后期上翘、地层存在非均质性的油藏；②高压、低渗、无污染、双孔介质的油藏；③高压、低-中渗、无-轻微污染的复合油藏；④常-高压、低渗、有污染的油藏；⑤常-高压、极低渗、无污染、干层的油藏。最后对利津地区深层沙三、沙四段各种类型油藏进行了评价，认为利津地区深层沙三、沙四段自然产能较低，一般需要进行改造措施来提高渗透性，提高产能。     

黑河右岸溢洪洞左导墙优化试验

黑河水利枢纽右岸溢洪洞为缩短引渠左导墙的长度,减少施工开挖量,降低施工难度,减少工程投资,进行优化试验.通过对7种不同的方案对比分析,选择了合适的体型,满足了工程要求.     

Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper is to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s ^-1>, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle materials is attempted. The design of a measurement system, which realizes computer acquisition, analysis, and graphic representation of data, is also presented.     

Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

"On the question of professional standards for computer-based test interpretation": Response to Kramer on Matarazzo.

Responds to the comments by J. J. Kramer (see record 1990-58925-001) on the current author's original article (see record 1986-19878-001), in which Matarazzo contends that computerized clinical psychological test interpretations offer considerable potential for improving the work of health service providers. However, cost additions associated with this technology have increased the probabilities that legislative, judicial, and administrative restrictions and sanctions will be imposed. Here, Matarazzo notes that he finds nothing in Kramer's comments that is inconsistent with the opinions that Matarazzo himself offered. (PsycINFO Database Record (c) 2010 APA, all rights reserved)