复合变质处理对铸造热锻模具钢力学性能的影响

研究了变质处理对铸造热锻模具钢力学性能的影响。结果表明：在相同热处理条件下，经RE和RE—Nb复合变质处理后，其冲击韧性与变质处理前相比分别提高了9．7和14．5J／cm^2，常温抗拉强度σb分别提高了82和234MPa，高温抗拉强度分别达到了976和994MPa，而硬度变化不大。     

MICROSTRUCTURE OF RAPIDLY SOLIDIFIED TiAl ALLOY POWDER

The rapidly solidified powder of Ti-34Al-2Mn alloy was obtained by means of ultrasonicgas atomisation (USGA) technique.The tupical size of the powder is 27 μm.X-ray diffractionresults show that the powder consists of major α_2-phase and minor γ-phase.Under opticalmicroscope both equiaxed and dendritical microstructure features were observed on RS pow-der sections.After annealing at 900 ℃/for 2 h in vacuum,most of α_2-phase transforms intoγ-phase,resulting in refinement of structure.     

BEHAVIOR OF Mg AND ITS EFFECT ON MECHANICAL PROPERTIES OF CAST Fe_3Al ALLOYS

Proper addition of 0.002 wt-% Mg to cast Fe_3Al alloy may obviously improve the room andhigh temperature tensile properties.Auger spectra show that Mg segregates near grainboundaries as very thin layers.Observation under TEM reveals that a suitable amount of Mgenhances ability of cooperative internal deformation so that the dislocations will ease the con-tinuous slip deformation through grain boundaries.The fracture feature of Fe_3Al alloy is oftransgranular cleavage at room temperature and cracks initiate at grain boundaries.     

化合物TbMn6Sn6的磁性和磁相变

采用分子场理论模型对稀土-过渡族金属间化合物的磁性、自旋重取向相变和场诱导的一级磁相变进行了研究.从理论上计算了TbMn6Sn6的易磁化方向随温度的变化以及不同温度时的磁化曲线,描述了自旋重取向相变和场诱导的一级磁相变.基于单离子模型计算了Tb离子和化合物的一阶和二阶磁晶各向异性常数及其随温度的变化,得到了和实验数据基本一致的结果.结果表明:Mn次晶格和Tb次晶格磁晶各向异性能之间的相互竞争是导致自旋重取向相变的物理机制,而稀土离子的四阶晶场项对场诱导的一级磁相变产生很大的影响.     

铝合金变质处理的现状和发展趋势

本文主要叙述了铝合金变质处理的方法及特点,并对铝合金变质方法的发展趋势作了展望.     

AB INITIO CALCULATION OF THE ELASTIC AND OPTICAL PROPERTIES OF Al_3Sc COMPOUND

The ab initio method has been performed to explore the elastic and optical properties of Al3Sc compound, based on a plane wave pseudopotential method. It can be seen that the calculated equilibrium lattice parameter and elastic constants are in reasonable agreement with the previous experimental data. The elastic constants satisfy the requirement for mechanical stability in the cubic structure of the Al3Sc compound. The optical property calculations show that a strong absorptive peak exists from 0-15eV and a relative small absorptive peak exists around 30eV. The form is caused by the optical transitions between high s, p, and d bands, and the latter results from the optical transitions from high s, p, and d bands to the low 2p band.     

冷镦挤复合的连接成形工艺分析及模具设计

基于镦挤连接成形的金属塑性变形规律,分析了一次连接成形件的冷镦挤复合成形的形变特点和工艺特点,进行了冷镦挤一次连接成形工艺过程的可行性分析设计和模具设计,并得到了生产实践验证。     

邻苯基苯酚合成工艺及应用

介绍了邻苯基苯酚的主要用途，国内外邻苯基苯酚主要的合成工艺路线及应用情况，通过对主要合成路线的比较，对今后国内的邻苯基苯酚的产业化提出合理的建议。     

气相色谱法测定有机化合物的蒸发热

本文用气相色谱测定了多种烷烃、芳烃、醇类和酯类的蒸发热。结果表明,测定数据与文献数据基本一致,误差一般在±5%以内。是一种简单、快捷的测定方法。     

熔体塔式造粒法生产尿基复混肥

化肥企业生产尿基复混肥对于农业科学施肥、提高肥料利用率、避免环境污染及促进企业产品结构调整都具有十分重要的意义。熔体塔式造粒法生产尿基复混肥较之其它方法优越性更为显著,笔者简要介绍该法的生产机理、工艺流程、技术特点、国内现状及产品市场前景等方面的一些情况。