The intervalley X6→Γ6, L6 scattering time in GaAs measured by ultrafast pump-probe infrared absorption spectroscopy

A direct measurement of the dynamics of electrons in the X₆ valley for a GaAs crystal by time-resolved absorption spectroscopy is reported for the first time. IR picosecond probe pulses were used to monitor the growth and decay of the population in the X₆ valley subsequent to excitation by a 527 nm pump pulse. The intervalley X₆→Γ₆, L₆ scattering time t_x of 0.70 ± 0.50 ps is determined and the crossection for the X₆→X₇ transition is estimated to be 1.8 × 10⁻¹⁶ cm².     

折反光学系统最佳红外像面位置的研究

较深入地研究了折反光学系统的红外像面,为确定实际的红外像面提出了一个新方法—计算从可见光边缘无色的弥散圆到红外最佳像面的距离。实践证明,这是确定这类光学系统最佳像面的一个方便、可靠的方法。     

Intercardinal面上最大副瓣电平的分析方法

对天线方向图计算中涉及的最大副瓣电平的分析方法进行了探讨，提出了用方向图搜索求解最大副瓣电平；同时给出了用该方法求得在同相矩形口径两种分布形式下Ｉｎｔｅｒｃａｒｄｉｎａｌ面上的最大副瓣电子平，并给出了Ｉｎｔｅｒｃａｒｄｉｎａｌ面的定义。     

虚拟红外成像器件的模拟输出电路设计

虚拟红外成像器件是能输出红外图像数据源的器件,在调试图像采集系统的硬件和软件时能替代非制冷红外焦平面阵列。虚拟成像器件的输出具有很好的线性度和精度,可作为图像采集电路的标定器件。文设计了虚拟红外成像器件的模拟输出电路,根据UL03401性能参数,设计了信号调理电路,通过在FPGA上使用ROM中查表方式校正模拟端口输出误差,在实际应用中表现了良好的精确性。     

视觉测量中多光学靶点亮度自适应控制

提出了一种面向大视场高精度视觉测量的多红外目标靶点（红外LED）亮度自适应控制方法。以微控制器PIC16F873A和LED驱动芯片MAX6964作为核心器件,设计了可满足大空间范围内靶点亮度控制需求的多目标靶点控制驱动器。为了使LED在近距测量时的调节精度和远近距离测量时的发光亮度都能满足要求,根据MAX6964输出特点设计了PWM信号输出电路,并采用推挽电路驱动LED。实验证明,目标靶点在CCD相机上成像光斑稳定一致。     

漫射红外技术的智能家居无线局域网设计

分析了红外技术在短距离无线通信中的优势,并将其应用在智能家居局域网中;结合安华高科技公司的HSDL-3020红外收发模块搭建了硬件电路,构成网络的主从节点;介绍了网络组建的过程,包括IrDA协议栈结构、数据编码格式、链路连接、网络管理机制等。本设计实现了对家居设备的统一管理,具有较高的应用价值。     

Photovoltaic effect and carrier transport mechanisms in Hg1-Mnxtdiodes

Hg_1-xMn_xTe semiconducting semimagnetic alloy has been examined in the context of its possible applications in infrared detectors. For analysis of detector properties the intrinsic carrier concentration has been calculated as a function of temperature and crystal composition. The starting material was In-doped Hg_1-xMn_xTe grown by the modified Bridgman method. The as-grown crystals with manganese content of 12-19% were p-type with carrier concentration and mobility of 100 cm²/ Vs at 77 K. An-type layer was formed on the surface by the annealing process in saturated Hg-vapour at 270-320° for 2 hrs. Capacitance-voltage curves have C^-3 dependence on applied voltage indicating that the junction is linearly graded. From standard electrical measurements and spectral characteristics the main detector parameters were determined and compared to those of Hg_1-xCd_xTe devices. The influence of material properties on detector parameters was analyzed. In order to estimate the carrier transport mechanisms, differential resistivities and current-voltage curves were measured over a wide range of temperaturesi.e. 25 to 300 K. From the temperature dependence of the R₀A product, it was established that at high temperatures (150-300 K) the carrier transport is dominated by a recombination-generation mechanism. In low temperature region the excess current at forward bias is probably attributed to carrier tunneling via energy states distributed randomly within the forbidden gap. At reverse bias the leakage surface or volume currents dominate in the carrier transport.     

基于红外检测的变电站设备热状态诊断

提出了一种基于红外检测的变电站设备热状态诊断方案。首先基于变电站设备的红外图像,采用局部方差映射函数和遗传算法阈值提取了变电站设备的热状态数据,以用于对异常区域进行分割。然后构建了红外图像灰度数与变电站设备温度两者之间的关系。最后采用改进的相对温差法达到了对设备热状态进行分类和诊断的目标,并捕获定位了变电站设备的热状态异常区域。实验结果表明,该方法提高了异常热区提取的精度和效率,提升了变电站设备热状态诊断的容错能力,进一步保证了变电站和整个电力系统的运行稳定性。     

Optimization algorithm for ultra-sparse arrays in regional energy focusing

The setting of ultra-sparse arrays is one of key factors for the performance of regional energy focusing.This paper focuses on one of its typical applications:Precision Electronic Warfare by UAV,and proposes an optimization algorithm for ultra-sparse arrays to maximize the performance of regional energy focusing.First,we establish the joint optimization model of the interference waveform and the positions of elements.Second,particle swarm optimization (PSO) is adopted to iterate the positions of elements.Then,the target value of the subproblem is solved for the fitness criterion,as the current array is known in each step of the iteration.Finally,we get the optimal solution of the interference waveform and the ultra-sparse array by this method.Numerical results indicate that the algorithm can optimize the array effectively,and improve the indicators of regional energy focusing obviously.Whether the localization errors of elements exist or not,the algorithm provides a better performance than existing algorithms which only design the interference waveform.