智能控制在回转窑配料系统中的应用

本文介绍智能控制在回转窑配料系统中的应用情况，并阐述该控制器设计、构成、软件系统特点及现场运行效果。     

A comparison of leaf-spring with aircushion trailer suspensions in the transport environment

Packaging engineers need to be able to accurately determine the forces present in the shipping environment in order to protect packaged goods. The purpose of this study was to determine the vertical vibration levels measured in three separate truck-trailer suspension systems; conventional leaf-spring, conventional air-ride and damaged air-ride. The main conclusion reached in this study is that the air-ride suspension when maintained gives lower power density (PD) levels on all road surfaces studied. A damaged air-ride suspension and leaf-spring suspension are very similar in response frequencies, although the damaged air-ride produces higher vibration levels at lower frequencies.     

智能钻井电缆信号传输的研究现状及难点

目前，钻井中井下检测信号的传输主要运用泥浆脉冲、电磁波等方式。随着井深的增加、复杂结构井和欠平衡井的增多以及对传输速度要求的提高，电缆信号传输必然是今后智能钻井的发展方向。通过对半个多世纪来各类电缆信号传输的设计进行归类，详细介绍了其设计原理，提出了电缆信号传输设计的基本要求与难点。     

油井远程智能监控系统

根据采油厂油井监控的需求,将油井数据采集、网络视频监控技术和无线通信技术紧密结合起来,设计规划适用于油井的远程智能监控系统。重点介绍了远程智能监控技术的系统原理、组成结构、实现方式及其实际应用效果。     

基于计算机视觉的油管螺纹非接触智能检测

针对传统接触式油管螺纹参数测量方法的缺点,开发了基于计算机视觉的油管螺纹非接触智能检测系统。在简述非接触智能检测测量原理和测量系统组成的基础上,详细介绍了利用非接触智能检测系统对油管螺纹参数进行测量的方法,其中包括图像的采集及预处理,图像的锐化,螺纹边缘轮廓的检测与提取,螺纹尺寸的测量计算与对比分析。     

Structural Disruption of Toothpastes Under Deformation — An Easy Release of Active Ingredients

The author suggests a technological approach relevant to the optimization of toothpaste compositions with regard to the easy release of the therapeutic ingredients under shear deformation. It is based on the comparative assessment of the steady‐state viscous behaviour of placebo samples (mixtures containing all the components except the therapeutic ingredients) and the final products. It is presumed that the maximum beneficial effect of the toothpastes, as therapeutic agents, is achieved if the final products and the placebo blends display similar shear‐thinning characteristics.     

An integrated intelligent machining system for axisymmetric parts using PC-based CAD and CAM software packages

Machining process planning involves the formation of a set of directions describing the machining operations required to transform raw stock into a finished part. Conventional process planning, performed manually, relies on the knowledge and competence of an experienced process planner and tends to be time consuming and error prone. In the past two decades, much effort has been spent on improving process planning by utilizing the power of a computer to emulate the capabilities of an experienced planner. During the same period, computer-aided design (CAD) and computer-aided manufacturing (CAM) software has been developed to enhance design productivity and to assist the NC code generation facets of the machining process. The entire planning process may be automated be integrating CAD and CAM using computer-aided process planing (CAPP). The research described in this paper outlines the design and development of an intelligent CAPP system integrating two commercial CAD and CAM software packages, Autocad and Mastercam.     

Hierarchical intelligent control with flexible AC transmission systems application

A novel hierarchical intelligent controller configuration is proposed using an artificial neural network as a control-mode classifier in the supervisory level and a set of pre-designed controllers in the lower level. Controller outputs are modified nonlinearly by the classifying signals in a structure resembling one artificial neuron with adaptively changed weights. The lower-level local controllers are implemented using neural networks. An illustrative example of this approach is based on the transient stabilization of a single-machine infinite-bus system studied in Flexible AC Transmission Systems (FACTS) research.     

ZXJ10机IN业务功能扩展及实现

本文从智能网的基本概念入手,论述了利用 ZXJ10程控交换系统为发展智能网业务提供支持功能的技术策略以及分阶段实现的过程,并对各个阶段能够实现的业务作了简要介绍。     

Rheological behaviour of concentrated yeast suspension

The effect of yeast cell volumetric concentration on the rheological properties of the suspensions was measured in a pipe-flow viscometer at 30°C: at low microbial concentrations the suspensions were Newtonian; however, non-Newtonian behaviour, which could be described by the power-law equation, was observed with suspensions at high microbial volumetric concentrations. At conditions of constant microbial morphology and growth rate, the results also indicated that a relationship could be developed between the power-law constants and the microbial volumetric concentration.