Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.     

硬质合金冷挤压凹模的热处理强化

本文叙述了ＷＣ－Ｃｏ硬质合金特别是ＹＧ２５牌号硬质合金的渗硼淬火热处理强化工艺和不同钴含量的合金的强化处理效果以及强化处理的合金应用效果，并对其强化机理进行了讨论。     

曲面零件拉深筋结构参数的优化

以曲面零件悬空区上径向最大拖动阻力为优化的目标函数，在模具几何约束、压筋时不诱发外皱、完全包筋等条件下，建立了拉深筋结构参数优化的数学模型。对拉深筋的高度H、圆角半径Rn、位置半径Rj、凹槽入口圆角半径rd等参数进行了优化，从而为合理选择拉深筋的参数提供了依据。文中还以实例进行了示算。     

玻璃钢制品拉拔模具的型腔表面处理工艺

玻璃钢制品拉拔工艺是较为先进的制造工艺之一，拉拔模具是决定玻璃钢制品质量好坏的关键。介绍了玻璃钢制品拉拔模具的型腔表面处理工艺，采用该处理工艺能有效地提高玻璃钢制品的质量。     

固溶处理对铝热-离心法制备的不锈钢衬层显微结构的影响

研究了铝热 -离心法制备的复合钢管中不锈钢内衬层的显微结构以及固溶处理对不锈钢层的显微结构及力学性能的影响。结果表明 ,不锈钢内衬层主要由奥氏体枝晶组成 ,枝晶间分布着一薄层铁素体。铁素体区内有AlNi金属间化合物析出。奥氏体和铁素体的相界面上有σ相析出。 1 0 0 0℃固溶处理可消除缓慢冷却过程中在不锈钢中形成的σ相和AlNi析出相 ,显著提高不锈钢的塑性 ,不锈钢内衬层的伸长率由处理前的 8%提高到处理后的 2 1 %。     

我国冶金分析定量检测仪器的发展趋势

为了了解我国分析仪器的发展,推动冶金分析领域定量检测技术的进步,文章以北京分析测试学术报告会暨展览会(BCEIA)在国内的展示成果为依托,选择电感耦合等离子体发射光谱(ICP-OES)、电感耦合等离子体质谱(ICP-MS)、X射线荧光光谱(XRF)、激光诱导击穿光谱(LIBS)等基础定量检测仪器为主要分析对象,归纳总结了这些仪器的发展过程、基本原理和主要结构。从分析检测人员的视角,讨论了该检测仪器的优势特点及应用效果;展望了定量分析检测技术的发展趋势;提出了以定量检测仪器为基础的新型高端科学仪器的发展前景。又以激光剥蚀电感耦合等离子体质谱(LA-ICP-MS)、辉光放电质谱(GD-MS)、电子探针X射线显微分析仪(EPMA)等拓展联用检测仪器为例,介绍了设备的主要特点及应用,最终总结出LA-ICP-MS为固体样品中微量元素分析的常用技术,GD-MS技术是痕量元素分析的重要手段,EPMA技术因具有与其他仪器结合包容性高的优点,虽然在使用过程中存在一定的缺陷,但已成为通用的分析手段。而我国定量分析检测技术正朝着现场化、专用化及标准化的方向发展。     

用圆柱铣刀加工带冠弯扭叶片

本文把微分几何中曲线与曲面之间的“切触”概念应用于叶片复杂曲面的数控加工，提出用圆柱铣刀的外圆在五坐标联动中加工小曲率曲面的最佳切触条件。     

Microstructure and mechanical properties of high strength as—cast Ti—15—3 alloy

The effects of heat treatment and solidification cooling rate on the microstructure and mechanical properties of as-cast Ti-15-3 alloy prepared by induction skull melting method were investigated.Results show that the microstructure of as-cast Ti-15-3 alloy changes from the features of simplified and larger size of beta grains to finer grain size with increasing solidification cooling rate.After solution treatment and different ageing treatment,alpha phase precipitates in grains interior as well as in grain boundaries.Due to the modification of the precipitate phase,the tensile stength and elongation of the alloy are improved simultaneously.A good combination of the values of 1.406GPa of σb and 4.5% of δ was obtained,which will be satisfied the use of this kind of alloy in critical areas.     

Effect of heat treatment on the microstructure and hardness of C-Cr-W-Mo-V-RE Fe-based hardfacing layer

0IntroductionHot-rollers and scissors are the critical parts of thesteel rolling equipments.At present,the surface soften-ing,the early wearing and the tearing are the primary rea-sons for the lowservice life of the hot-rollers and scissors.Although hardfacing has been applied to repaire the partseasily being worn and torn,such as the hot-rollers and thescissors,and has been obtained economic benefits[1-3],this technology has common problem:if the hardfacing lay-er contains more excessive allo…     

高温精炼处理对铸造镍基高温合金组织与性能的影响

研究了高温精炼处理对铸造镍基高温合金组织与性能的影响.普通铸造镍基合金枝晶组织粗大,晶界碳化物呈链状分布,晶内碳化物呈草体汉字状密集分布于枝晶间,是合金塑性低的主要原因.经高温精炼处理后,合金的枝晶组织细化,晶界及枝晶间的碳化物数量减少,γ γ共晶相数量增加,晶界碳化物呈不连续质点状分布,晶内碳化物的密集程度下降,拉伸塑性和蠕变(持久)寿命得以明显提高.经1 650℃,5 min高温熔体处理后,合金室温延伸率由3.5%提高到9.2%,700℃高温塑性由2.0%提高到8.0%,900℃高温塑性由2.8%提高到9.6%,蠕变寿命由34 h提高到52 h,蠕变塑性由4.3%提高到6.11%.推荐的最佳高温精炼处理制度为1 650℃保温4 h.分析了高温精炼处理对合金液态结构、凝固组织与性能的影响机理.