Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.     

Thermal decomposition kinetics and lifetime of the complex of Tb2（BA）6（PHEN）2

The thermal behavior of Tb2(BA)6(PHEN)2 (BA: benzoate, and PHEN: 1,10-phenanthroline) in a static air atmospbere was investigated by TG-DTG, SEM and IR techniques. By the kinetic method of processing thermal analysis data put forward by Malek et al., it is defined that the kinetic model for the first-step thermal decomposition is SB(m, n). The activation energy E for this step reaction is 99.07 kJ/mol, the entropy of activation ΔS^≠ is -84.72 J/mol, the enthalpy of activation ΔH^≠ is 94.26 kJ/mol, the free energy of activation ΔG^≠ is 144.77 kJ/mol and the pre-exponential factor lnA is 20.93.The lifetime equation at mass-loss of 10% was deduced as lnτ = -29.0312 19760.83/T by isothermal thermogravimetric analysis.     

8-羟基喹啉-N-氧化物和5,7-二硝基-8-羟基喹啉-N-氧化物与Au(Ⅲ)、Pd(Ⅱ)的配合物之合成

合成4种标题配合物,用元素分析、红外和紫外光谱、摩尔电导、核磁共振氢谱、荧光光谱及X射线粉末衍射物相分析研究了它们的组成和性质及其结构。按结构将配合物分为两类,一是含氢键的离子缔合物;一是含金属—氧键的螯环型配合物。     

粉末冶金法制备SiC晶须增强MB15镁基复合材料

采用粉末冶金法制备了SiC晶须增强镁基复合材料(SiCW／MB15)试样。通过检测基体显微硬度探讨了SiCW对镁合金时效规律的影响，并借助扫描电镜(SEM)、透射电镜(TEM)和拉伸试验，研究了混粉方式对复合材料室温力学性能、SiCW分布及显微结构的影响。结果表明，MB15及其复合材料的时效硬化曲线上均存在双峰现象；SiCW的加入既提高了MB5的硬度，又加快了其时效速度：混粉方式对晶须分布及SiCW／MB15复合材料的室温力学性能影响很大。     

复合合金化对AZ91镁合金铸态组织的影响

利用光学显微镜、扫描电镜和X射线衍射仪研究了0.5?、0.2?、0.2%Sr(质量分数,下同)复合合金化对AZ91合金铸态组织影响。结果表明,0.5?、0.2?、0.2%Sr复合加入可以显著细化合金的铸态组织,0.5?、0.2?、0.2%Sr同时加入,其细化效果优于0.5?和0.2?或0.5?和0.2%Sr的复合加入,并且在组织中出现针状或杆状的Al4Ce新相。     

Study on the anodic film formation process of AZ91D magnesium alloy

The formation of anodic film of AZ91D magnesium alloy has been investigated by means of electrochemical impedance spectroscopy (EIS), cyclic voltammetry, anodic polarization curve, current-time transients and SEM technique. The results show that, under our experimental conditions, the formation of AZ91D anodic film follows the mechanism of 3D nucleation with diffusion controlled growth. With the increase of applied anodizing potential, the nucleation type of anodic film changes from progressive to instantaneous. The results also show that the initially formed anodized film is threadlike and porous, and high potential is essential for the formation of good anodic film with excellent properties.     

Quantification of response time in poly(vinyl alcohol)–metal complex thermochromic polymeric systems

Thermochromic poly(vinyl alcohol) (PVA)‐based material was synthesized and an extensive study of its thermochromic behavior with respect to response time was carried out. It was observed that it is possible to manipulate the response time by keeping control over chemical and physical parameters. The response time, which is the most important property of a smart material, has in this case been found to be very much influenced by rate of heat transfer into the material. Different compositions of the thermochromic material and their corresponding response time with respect to rate of heat transfer were studied and correlated. First, a theoretical equation was derived and later on it was experimentally verified to quantify the response time in PVA–metal complex‐based thermochromic systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4832–4834, 2006     

关于生产精制元明粉的探讨

介绍了以山西运城南风自产芒硝为原料生产精制元明粉的几种工艺,以及国内外精制元明粉的市场及生产状况.精制工艺包括化学除杂法、原料优选法、重结晶法.结果表明,精制元明粉的生产过程实质是一个除杂、提纯过程：对于钙离子含量高的原料,可采用化学除杂法;对于氯离子含量高的原料,可采用氯离子富集法、冷冻法或洗涤法;镁离子较难去除,可采用水硝洗涤、冷冻法.     

不同形貌氢氧化镁的化学合成及影响因素

对不同形貌氢氧化镁的化学合成及外部生长环境进行了综述。尤其对影响氢氧化镁结晶性能和形貌起关键作用的因素，如碱性沉淀剂的选择、合成温度的确定、不同镁盐的影响、碱和镁盐的初始浓度及配比、水热处理、反应物的混合方式、晶形控制剂的加入等，进行了详细的阐述。     

配合物Zn(Him)2(OAc)2的室温固相合成及表征

乙酸锌与咪唑 (Him)通过室温固相反应一步合成配合物Zn(Him) 2 (OAc) 2 ,反应不需溶剂 ,2 0min即可完成 ,产率达 96% ,并用元素分析、红外光谱、热重分析、X -射线粉末衍射和X -射线单晶衍射对产物进行了表征。