Effects of Al content on the corrosion properties of Mg–4Y–xAl alloys

The corrosion performances of Mg–4Y–xAl (x = 1, 2, 3, and 4 wt%) alloys in the 3.5% NaCl electrolyte solution are investigated by electrochemical tests, weight loss measurement and corrosion morphology observation. The results indicate that corrosion modes for the alloys are localized corrosion and the filiform type of attack. With Al concentration increasing from 1 to 4 wt%, the corrosion rate of Mg–4Y–xAl alloys decreases firstly and then increases, and WA42 alloy shows the best corrosion resistance. The addition of Al element to Mg–4Y alloys leads to the formation of Al₂Y and Al₁₁Y₃ intermetallic compounds and reduces the proportion of Mg₂₄Y₅ phase. Corrosion resistance of the Mg–4Y–xAl alloys mainly depends on the size and distribution of the second phases. Besides, the addition of excessive Al can greatly consumes the Y element in the matrix, thus leading to a less protective film on the alloys. The effect of the relative Volta potential changes between the second phases and α-Mg on corrosion resistance of Mg–4Y–xAl alloys is insignificant. The main corrosion products of the Mg–4Y–xAl alloys are Mg(OH)₂, Mg₃(OH)₅Cl·4H₂O, Mg_0.72Al_0.28(CO₃)_0.15(OH)_1.98(H₂O)_0.48, and Mg₄Al₂(OH)₁₂CO₃·3H₂O.     

Microstructure and characterization of Ag1−xLixNbO3 ceramics

Silver–lithium niobate, Ag_1−xLi_xNbO₃, is a promising candidate for lead-free piezoelectrics. Ceramic samples for x equal 0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.08 and 0.1 were synthesized by solid state reaction. Room temperature X-ray studies indicate that all samples consist mainly of perovskite phase. Only small amounts of secondary phases, namely Ag₂Nb₄O₁₁, Ag and LiNbO₃, appear. For x≈0.06 the orthorhombic–rhombohedral morphotropic phase boundary is observed. Excellent piezoelectric properties, recently reported for x>0.1, may be the result of proximity of morphotropic phase boundary. Scanning electron microscopy and secondary ion mass spectroscopy investigations suggest that the secondary phases occur chiefly at the grain boundaries. Dielectric measurements, carried out in a wide temperature range, revealed that Ag_1−xLi_xNbO₃, for x≤0.05, undergoes the same complex sequence of phase transitions as AgNbO₃. On the other hand, for x>0.06, the temperature dependence of dielectric permittivity exhibits only two maxima, related to transitions from the ferroelectric R phase to the antiferroelectric M phase and followed by the paraelectric O phase. The dielectric results obtained confirm the existence of the morphotropic phase boundary.     

Synthesis and characterization of monodisperse uniformly shaped respirable aerosols

The top‐down, micromolding technique, referred to as Particle Replication in Nonwetting Templates (PRINT^®), affords a new opportunity for the generation of inhalation therapeutics. Powders were fabricated with predetermined particle size and shape; when dispersed with a collision jet nebulizer, these particles resulted in monodisperse aerosols with geometric standard deviations well below 1.2. Dynamic shape factors for this novel set of uniformly shaped particles were determined by correcting the drag of nonspherical particles in the ultra‐Stokesian flow conditions of the aerodynamic particle sizer (APS). This convenient approach for shape factor determination agreed well with current literature approaches and allowed for the correction of APS results for particles with known volumes. Determined shape factor values of PRINT geometries were used to estimate the theoretical median aerodynamic diameters of individual aerosols, which were then compared to actual inhalation powders. © 2013 American Institute of Chemical Engineers AIChE J, 59: 3184–3194, 2013     

煤层厚度变化区域矿震活动规律研究

为更有效地预防采掘期间深部煤层分叉或厚度变化区域冲击矿压的发生,以某矿回采工作面为工程实践背景,基于矿震活动在能量释放与震动频次方面的变化特征及在空间上的分布规律,分析了煤层分叉及煤层厚度变化对冲击矿压的影响。结果表明:在大能量矿震发生前,日震动频次连续处于高位而日释放能量较长时间维持低水平;在煤层厚度变化区域,矿震活动活跃,容易发生大能量矿震。通过对矿震进行"时间-空间"分析,可以确定矿震集中区域和能量积聚时间段,从而可对煤层厚度变化影响区域进行有针对性的卸压防冲工作。     

三距离交会法在输电线路测量中的应用

针对输电线路测量中,不能直接精确测定钢管杆中心坐标的问题。提出了使用三距离交会的测量方法,以及利用网络RTK配合手持电子测距仪,快速测得钢管杆附近三个点的坐标以及相应距离。针对不同观测数据编写了相应的VB程序,提高了工作效率。     

直升机纵向系统鲁棒滑模控制律设计

在建立系统全包线T-S模糊模型的基础上,基于系统品质要求和可测状态约束条件,采用参数鲁棒设计方法,确定反馈控制参数的可用集合,实现等效控制律,相应确定系统的滑模面参数,给出了直升机纵向控制系统的全包线滑模控制律设计结果。仿真结果显示,系统具有较强的抗外界干扰能力,动态品质满足指标要求,表明文中提出的设计方法可行且有效。     

Sintering of Pt/Al2O3 reforming catalysts: EXAFS study of the behavior of metal particles under oxidizing atmosphere

The effect of an oxidative atmosphere (300 °C) is studied on fresh and sintered unchlorinated naphtha reforming catalysts containing 0.6–1% Pt. The TPR profiles show that only one species is formed using our experimental conditions, regardless of the mean crystallite size of the metal particles. The structural information supplied by EXAFS compared with cuboctahedral particle modeling, implies that such species is a surface platinum oxide, the structure of which is close to that of PtO₂, but largely distorted. This is true whether the catalyst is sintered or not.     

A new ‘tailor-made’ methodology for the mechanical behaviour analysis of rubber-like materials: I. Kinematics measurements using a digital speckle extensometry

This paper is the first part of a work devoted to the setting-up of a methodology for the mechanical behaviour characterization of rubber-like materials, using a digital speckle extensometer. We present here the experimental approach, specific to large strain measurements. The proposed method is based on in-plane kinematics measurements using an optical extensometer. The whole two-dimensional field of in-plane displacements is obtained by a digital image processing. We discuss then the correlation calculations and how to achieve the optimal subset matching. Next, we specify how to derive the principal stretch ratios, and the accuracy on these components, issued from a subsequent numerical calibration.Finally, we present experimental data dealing with a carbon black, filled natural rubber, issued from uniaxial traction tests, pure shear tests, and tensile tests performed on double-edge notched tensile specimens.     

Dispersive forces of particle–surface interactions: direct AFM measurements and modelling

Fundamentals of particle–particle interaction are of great interest in agglomeration processes. Particle adhesion depends on dispersive forces (van der Waals force), local chemical bindings, Coulomb force and capillary attractions. Additionally, surface properties like roughness, adsorption layers and surface chemistry strongly affect adhesion forces. van der Waals interactions are poorly understood because popular ab initio force calculations for molecules like density functional theory (DFT) often do not lead to proper results. van der Waals forces are difficult to measure directly. We present direct measurements of particle–particle and particle–surface interactions in the gas phase carried out with an atomic force microscope (AFM). Special emphasis is given to a proper statistical treatment of the data. For modelling of particle adhesion, we use computer-assisted empirical potential methods. Parameters like adsorbed water and surface roughness are considered. We extract parameters for weak interactions from the Lifshitz theory and gas adsorption data. Adsorbing molecules can be used as probes to measure dispersive forces. Studying surface and particle properties combined with computer-assisted modelling is a basic requisite to reach the aim of predicting particle–particle interactions in industrial processes.     

Holistic Analysis of the Tribological Interfaces of an Axial Piston Pump – Focusing on the Pump Efficiency

Research work performed on an axial piston pump is shown in a holistic manner, analyzing each lubricating interface by linking their gap height and temperature behavior to the overall pump efficiency. The temperature field and dynamic fluid film height were measured in two of the three lubricating interfaces. This is the first time that the temperature fields and gap heights were simultaneously measured in two of the main three interfaces of an axial piston machine. For a deeper analysis of the measurement data, all gaps were simulated with a numerical tool which takes solid body deformation due to temperature and pressure loads into account. This unique combination of both extensive measurement data and sophisticated simulation resulted in novel trends that clarify the complex phenomena occurring in these hydrostatic fluid films.