中国光纤通信技术的研究、应用和发展

主要从光纤光缆、光器件与组件、光传输设备与系统、光网络建设等方面论述光纤通信技术在我国的研究、应用发展历程，并对我国光纤通信技术的未来发展进行展望。     

Novel Organic‐Dehydration Membranes Prepared from Zirconium Metal‐Organic Frameworks

Membranes with outstanding performance that are applicable in harsh environments are needed to broaden the current range of organic dehydration applications using pervaporation. Here, well‐intergrown UiO‐66 metal‐organic framework membranes fabricated on prestructured yttria‐stabilized zirconia hollow fibers are reported via controlled solvothermal synthesis. On the basis of the adsorption–diffusion mechanism, the membranes provide a very high flux of up to ca. 6.0 kg m^?2 h^?1 and excellent separation factor (>45 000) for separating water from i ‐butanol (next‐generation biofuel), furfural (promising biochemical), and tetrahydrofuran (typical organic). This performance, in terms of separation factor, is one to two orders of magnitude higher than that of commercially available polymeric and silica membranes with equivalent flux. It is comparable to the performance of commercial zeolite NaA membranes. Additionally, the membrane remains robust during a pervaporation stability test (≈300 h), including exposure to harsh environments (e.g., boiling benzene, boiling water, and sulfuric acid) where some commercial membranes (e.g., zeolite NaA membranes) cannot survive.     

Enhanced Hole‐Transporting Behavior of Discotic Liquid‐Crystalline Physical Gels

Discotic liquid‐crystalline (LC) physical gels have been prepared by combining the self‐assembled fibers of a low‐molecular‐weight gelator and semiconducting LC triphenylene derivatives. The hole mobilities of the discotic LC physical gels measured by a time‐of‐flight method become higher than those of LC triphenylenes alone. The introduction of the finely dispersed networks of the gelator in the hexagonal columnar phases may affect the molecular dynamics of the liquid crystals, resulting in the enhancement of hole transporting behavior in the LC gel state.     

YAG激光泵浦光纤产生受激喇曼散射

本文利用YAG激光泵浦光导纤维产生受激喇曼散射,并利用所摄取的受激喇曼光谱图定出斯托克斯线波长,计算样品的喇曼频移,对实验中所观察到的现象进行分析讨论。     

六重对称PC光纤结构参数对基模损耗影响研究

用多极方法数值研究构成六重对称全内反射型光子晶体光纤各种结构参数对1.55μm处基模限制损耗的调节,数值结果表明包层空气孔层数、空气孔直径、间距、相对孔径对限制损耗都有影响,其中空气孔层数的影响极大,在其他参数不变时层数越多限制损耗越小.层数与间距一定时,包层空气孔直径越大限制损耗越小;层数与包层空气孔直径一定时,间距越大限制损耗越大;在层数与相对孔径一定时,限制损耗随空气孔半径与间距的同比增大而减小.     

Magnetic properties of nickel filament polymer-matrix composites

The magnetic properties of polyethersulfone-matrix composites with 3-19 vol.% polycrystalline nickel filaments (0.4 (im diam) were investigated. These filaments were found to exhibit hysteresis energy loss 10800 J/m³ of nickel and coercive force 16.9 kA/m, compared to corresponding values of 4930 J/m³ and 4.7 kA/m for 2 μ.m diam polycrystalline nickel fibers, 1020 J/m³ and 0.5 kA/m for 20 μm diam polycrystalline nickel fibers, and 1280 J/m³ and 2.3 kA/m for solid polycrystalline nickel.     

Giving Direction to Motion and Surface with Ultra‐Fast Speed Using Oriented Hydrogel Fibers

Thermoresponsive hydrogel fibrous membranes showing directionally controlled movements and surface change with ultra‐fast speed are presented for the first time. They show reversible coiling, rolling, bending, and twisting deformations in different controllable directions for many cycles (at least 50 cycles tried) with inside‐out change in surfaces and shapes. Speed, reversibility, large‐scale deformations and, most importantly, control over the direction of deformation is required in order to make synthetic actuators inspired from natural materials or otherwise. A polymeric synthetic material combining all these properties is still awaited. This issue is addressed and provide a very simple system fulfilling all these requirements by combining porosity and asymmetric swelling/shrinking via orientation of hydrogel fibers at different angles in a fibrous membrane. Electrospinning is used as a tool for making membranes with fibers oriented at different angles.