体数据可视化的加速光线投射算法

加速的体数据光线投射算法将光线在三维空间的采样问题看成光线的三维扫描转换问题，以层为基本的处理，避免了对三维体数据的随机检索，并且利用平行投影光线的方向都相同的特点，用查表快速实现了光线的三维扫描转换。该算法在微机上得到检验，它在重建时间和内存花费上都优于传统的实现方法。     

基于线性八叉树的光线投射体绘制算法改进研究

体视化是地学信息三维可视化研究的前沿技术之一，体绘制算法的效率直接关系到体视化的效果。本文在研究已有光线投射体绘制改进算法的基础上，提出利用线性八叉树数据结构对光线投射体绘制算法进行改进研究，不仅实现了体数据的压缩。而且能对压缩体数据进行直接体视化。在PC机上的实验表明，该方法具有时间复杂度与数据复杂度基本无关的特点．加速效果明显。最后，文章指出了该方法的适用范围。     

Imaging biofilm in porous media using X-ray computed microtomography

In this study, a new technique for three-dimensional imaging of biofilm within porous media using X-ray computed microtomography is presented. Due to the similarity in X-ray absorption coefficients for the porous media (plastic), biofilm and aqueous phase, an X-ray contrast agent is required to image biofilm within the experimental matrix using X-ray computed tomography. The presented technique utilizes a medical suspension of barium sulphate to differentiate between the aqueous phase and the biofilm. Potassium iodide is added to the suspension to aid in delineation between the biofilm and the experimental porous medium. The iodide readily diffuses into the biofilm while the barium sulphate suspension remains in the aqueous phase. This allows for effective differentiation of the three phases within the experimental systems utilized in this study. The behaviour of the two contrast agents, in particular of the barium sulphate, is addressed by comparing two-dimensional images of biofilm within a pore network obtained by (1) optical visualization and (2) X-ray absorption radiography. We show that the contrast mixture provides contrast between the biofilm, the aqueous-phase and the solid-phase (beads). The imaging method is then applied to two three-dimensional packed-bead columns within which biofilm was grown. Examples of reconstructed images are provided to illustrate the effectiveness of the method. Limitations and applications of the technique are discussed. A key benefit, associated with the presented method, is that it captures a substantial amount of information regarding the topology of the pore-scale transport processes. For example, the quantification of changes in porous media effective parameters, such as dispersion or permeability, induced by biofilm growth, is possible using specific upscaling techniques and numerical analysis. We emphasize that the results presented here serve as a first test of this novel approach; issues with accurate segmentation of the images, optimal concentrations of contrast agents and the potential need for use of synchrotron radiation sources need to be addressed before the method can be used for precise quantitative analysis of biofilm geometry in porous media.     

井间层析成像混合最短射线追踪旅行时反演

传统的曲射线追踪方法存在一定的缺陷,弯曲法得到的旅行时可能收敛到局部最小而不是全局最小。为了使其得到较好的射线路径,本文介绍一种方法对弯曲法进行修改。其起始猜测路径采用由SPR得到的曲折射线,这样既可以获得全局最小走时,又避免了SPR方法的射线路径不够光滑,相当于对SPR所得射线路径做平滑处理。射线追踪路径实例和井间地震层析成像模型反演表明,这种混合方法效果很好。     

ETC系统信道传播损耗评估方法研究

无线信道传播效率是影响ETC系统性能的主要因素之一。考虑客车与轿车外形差异,定义了ETC系统信道传播损耗系数,提出一种基于两径模型的ETC系统信道传播损耗评估方法,便于评估ETC系统性能。评估方法预测及实测结果表明:ETC天线极化方式影响车载标签单元(OBU)接收功率,OBU距离地面高度越高,其接收功率越大;OBU识别范围小于10 m时,轿车引擎盖的电磁波反射引起垂直极化波衰减损耗突变,为保证OBU的成功识别,ETC天线距离地面高度应大于5.35 m。     

多种金属氧化物混合物的固溶体的穆斯堡尔效应及XRD分析研究

在αFe_2O_3中依次累积加入K_2O、Cr_2O_3、CuO、MGO和SiO_2形成不同混合物,在空气中800℃活化焙烧5h后,发现αFe_2O_3和所加氧化物之间发生了不同的反应,生成不同的化合物。该结果有助于进一步理解这些氧化物作为助剂和载体的作用。     

双能X线吸收法与近红外法测定脂肪含量的评价

用美国Ｌｕｎａｒ ＤＰＸ－Ｌ骨密度仪和日本ＦＶＴＲＥＸ－１０００型近红外仪对９２例人群进行脂肪含量评价。其中７８例为健康人，男性４３例，女性３５例。测定结果女性平均脂肪含量高于男性，两种方法对全部人群的体脂肪测定结果相关系数ｒ＝０．９２１，本文介绍测定原理并对两种方法的优缺点作了评价。     

X射线成像光斑检测装置研制

设计了一种低成本,快速响应的X射线光斑检测装置,可用于解决系统结构偏差所引起的透视探测器接收位置处的光斑偏离。该装置通过检测关键点处的X光斑强度及分布情况以判断实际X光斑位置与理论设计的偏差,以此为依据进行多次调整可使系统光斑调节到一合理位置。     

紫外电晕检测仪在电晕放电检测中的应用

首先阐述一种新型紫外电晕检测仪的原理,介绍该仪器目前在国外的应用情况,然后分析该类仪器在系统应用中技术特点和存在的一些问题,最后结合电力系统快速发展的展望了应用的前景。