大功率CO_2激光器非平衡态合成WO_3／Fe_2O_3新型陶瓷催化剂──Ⅱ．WO_3／Fe_2O_3烯烃歧化反应催化剂的催化活性

用大功率ＣＯ２激光器熔制ＷＯ３／Ｆｅ２Ｏ３新型烯烃歧化反应催化剂。考查了催化剂组成、激光功率及熔炼时间与丙烯歧化反应催化活性之间的关系。     

油气集输管道最佳敷设方式的分析

根据大庆油田油气集输工艺设计的实践，分析了几种实用的油气集输管道敷设方式的优缺点。在对不同敷设方式的管道热耗做了较详细计算的基础上，进行了比较，提出了确定油气集输管道的最佳敷设方式：站外管道基本上采用埋地敷设；站内管道则应依据站址处的常年最高地下水位资料来确定，即在保证管道不长期受地下水浸泡的前提下，站内室外管道以埋地敷设为主，室内管道以架空与理地同时敷设为最佳；地下水位高的站内，以架空敷设最佳。     

PC／PET共混物的非等温结晶动力学

采用等速变温ＤＳＣ法对ＰＣ／ＰＥＴ共混体系的非等温结晶动力学进行了研究，结果表明，从玻璃态结晶时，随着ＰＣ含量的增加，ＰＥＴ组分的结晶速率先增加后降低。耐从熔体结晶时，体系的结晶速率随着ＰＣ含量的增加而增加，讨论了ＰＣ对ＰＥＴ组分结晶过程的影响。     

论计算机通信网络的开放性

本文从开放性原理出发，描述了计算机通信网络系统开放性体系的思想及其实现技术。     

基于ATM的网络互连方式

ＡＴＭ技术能否在数据通信网中广泛采用取决于其是否能高效地支持现有业务，其中主要为非连接业务。本文介绍了几种基于ＡＴＭ 的非连接业务支持方式和协议体系结构，对其进行了评述并对ＩＰ分组到ＡＴＭ信元的封装效率进行了分析。     

Probing the early stages of polymerization of ethylene on a model chromium/silica catalyst by Fourier transform infrared spectroscopy

The nature of the interaction of monomer, and the early stages of growth of oligomers of ethylene on a rather more uniform surface of Cr/SiO₂ catalyst than hitherto studied has been investigated by differenceFTIR spectroscopy using C₂D₄ and C₂H₄ as reactants both with and without subsequent treatment of the catalyst with CO andTHF. The active catalyst was prepared by reaction of vapour phase CrO₂Cl₂ with the vicinal hydroxyls of the silica surface. Three distinct kinds of methylene groups were detected. Arguments are given for assigning the peaks at 2935 and 2860 cm^–1 to CH₂ groups directly bound to the active site and those at 2920 and 2850 to CH₂s in the growing chain well removed from the Cr. The peaks at 2160 and 2165 cm^–1 are attributed to CD₂ groups hydrogen bonded to surface hydroxyls.     

Failure analysis of a hot extrusion die used for Al-Li alloy processing

Al-Li alloys being developed as lighter, substitutes for conventional high strength Al alloys are to be processed by routine methods. During extrusion of a 8090 Al-Li alloy, the extrusion die container failed causing some alarm. This failed die container was analysed to examine if the failure was caused by interaction of Li diffusing out of Al-Li alloy with the carbides of die steel. The evidence, although not conclusive, is sufficient to exercise caution during such processing.     

ATM局域网仿真体系结构的研究

本文在简要叙述了基于ＡＴＭ技术进行局域网仿真的原理后，对局域网仿真体系结构作了一些探讨。考虑的重点是无连接服务和群播功能的实现     

A bidding decision index for construction contractors

Results from applying the model on a sample of contractors, the majority of whom were international and operating in Egypt, reinforces the credibility of the developed methodology, claim the authors.     

Direct preparation of particles from liquid suspension for ESEM or SEM analysis

A simplified method for the preparation of particles from liquid suspensions has been developed. Particles are deposited directly on carbon planchets for rapid analysis by environmental scanning electron microscopy or by conventional scanning electron microscopy after an additional drying step. This is accomplished by filtering the liquid through thin carbon planchets. Three different grades of graphite were investigated for their suitability as the source material for these planchets. The high quality isomolded graphite is recommended for the filtration and direct observation of particles by electron microscopy. This technique is demonstrated for particles in hydraulic fluid and aquatic suspended particulate material from a natural water source.