微控制器与嵌入式RISC处理器的发展现状

综述了新一代微控制器与嵌入式RISC处理器的主要特点和发展方向；详细介绍了目前国内外最流行的不同字长的系列机种、结构特点、专有特性及系统应用等；最后预测了它们的世界销售市场与国内发展前景。     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

EPON:下一代接入网的最佳选择

EPON技术具有大带宽、高性价比、结构简单和一定服务质量保证等特点,被业界普遍看好,成为 下一代接入网的最佳候选技术.本文主要介绍了EPON的工作原理、分层结构、接入控制和组帧方式,最后给出 了实现EPON的关键技术和难点以及EPON的发展近况.     

液动旋冲接头冲击功测试方法研究

液动旋冲接头性能参数是旋冲接头设计的主要依据之一，如何对液动旋冲接头的参数进行检测是非常重要的工作。在分析和比较了测试液动旋冲接头性能参数各种方法的基础上，选择了冲击力法来进行破岩液动旋冲接头的性能参数测试，以YD系列测力传感器为检测元件，建立了一套比较完善的自动检测系统。分析了影响单次冲击功测试的因素，得出了测试旋冲接头的性能参数的影响规律。     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

预测控制算法的统一格式及其在电加热炉的应用

本文根据常用的两类预测控制算法推出一种新型预测控制算法。并将其应用于一双输入/双输出的力学持久机电加热炉的温度控制系统上,获得了满意的结果:控温精度为±1.5℃/300℃,且适用于非最小相位系统。     

Bulk growth of Hg0.8Cd0.2Te single crystals by a combined CVT-seeding technique

The growth of high quality Hg_0.8Cd_0.2Te bulk single crystals by CVT, combined with an in-situ seeding technique, is reported here for the first time. For this purpose, a temperature difference of 590° → 540° C with a gradient of 40°-50° C/cm at the solid-vapor interface, and about 0.1 atm of HgI₂ as a transport agent, were employed. The bulk crystals have the expected stoichiometry and compositional homogeneity. Etch pit densities of 10⁴-10⁵ cm⁻² on the (111) face and hitherto unreported etch pits on the (100) face were observed in this work. Possible origins of the sub-grain structure are discussed.     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

手持式GPS测量在地球化学勘查中的应用

在大比例尺的化探测量中，用GPS单点绝对定点技术来进行测网的布设，减少了控制测量环节。降低了生产成本。因此，GPS绝对定点在化探测量中仍有应用的前景。但是，绝对定位时必须做到：(1)合理选择校正的控制点(三角点或四角点)；(2)正确校正参数；(3)定期地检测仪器；(4)保证仪器的高度角和有效工作时间。本次该方法应用在化探的测网布设中。实测面积7km^2，经传统测量仪器检查验收，证明文中提出的方案完全可以用于生产实践。