单层球面网壳地震反应特征分析

考虑不同矢跨比、荷载、跨度和支座刚度等多种因素的影响,对单层球面网壳在地震作用下的反应进行了较全面的研究,给出了其随各参数变化的规律,得出了在单层球面网壳抗震设计中起控制作用的是水平地震作用而不是竖向地震作用等有益的结论.此外本文还给出了由于阻尼比不同而需对引用现行抗震规范反应谱分析的网壳地震作用进行修正的建议.     

测井数据实时采集与接口设计

介绍了一种采用改进型的ＣＬＳ３７００数控测井系统对微电阻率扫描仪数据采集与控制接口的设计及实现方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设计出通信接口，解决了微电阻率方法。基于ＣＬＳ３７００数控测井仪和ＦＭＳ仪采用８９Ｃ５１单片机设备出通信接口电路，解决了微电阻主扫描仪现现场实时处理中的瓶颈问题。     

一种实现目标定位与跟踪的新方法

本文介绍了一种采用圆周阵对目标声源进行被动定位和跟踪的方法，与线阵不同，圆四可对目标进行全方位跟踪，且测距精度不受目标方位变化的影响，文中给出了圆周阵的测距，测向公式，并从理论上分析了测距性能，计算机仿真结果验证了理论分析的正确性。     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

β—BBO晶体的电光性能

用干涉法测量了β－ＢＢＯ晶体的电光系数：γ２２＝２．６，γ３３＝０．２３，γ３１＝０．２５，γ５１＝－３．５×１０－１２ｍ／Ｖ。结果表明如果在Ｙ方向加电场，Ｚ方向通光，β—ＢＢＯ晶体可能制作成有应用价值的光开关。     

Software for dynamic reconfigurable order picking systems

This paper describes an approach, conceptual framework, and software architecture for dynamic reconfiguration of the order picking system. The research and development project was sponsored by the Material Handling Research Center (MHRC), a National Science Foundation sponsored Cooperative Industry/University Research Center. The storage configuration is assumed to be an in-the-aisle order picking system in which stockkeeping units (SKUs) can occupy variable capacity storage locations and stock-splitting is allowed among zones (clusters). The product mix may include multiple product families with different life cycles, correlated demand within families and commonality of demand across families.     

Apollonius tenth problem via radius adjustment and Möbius transformations

The Apollonius Tenth Problem, as defined by Apollonius of Perga circa 200 B.C., has been useful for various applications in addition to its theoretical interest. Even though particular cases have been handled previously, a general framework for the problem has never been reported. Presented in this paper is a theory to handle the Apollonius Tenth Problem by characterizing the spatial relationship among given circles and the desired Apollonius circles. Hence, the given three circles in this paper do not make any assumption regarding on the sizes of circles and the intersection/inclusion relationship among them. The observations made provide an easy-to-code algorithm to compute any desired Apollonius circle which is computationally efficient and robust.     

利用单片机实现的空气干燥器控制仪

为了满足不同生产实际的需要 ,介绍了利用单片机实现的空气干燥器控制仪的基本组成和工作原理 ,重点介绍了温度测量和A/D转换方法 ,进一步指出了提高测量准确度的途径。经实际应用表明 ,各项指标满足控制要求。     

聚丙烯催化剂的研发进展

综述了用于丙烯聚合的Ziegler-Natta催化剂在给电子体技术及催化剂制备工艺等方面,茂金属催化剂在制备丙烯均聚物、丙烯共聚物及特殊聚丙烯等方面,非茂单活性中心催化剂在丙烯活性聚合、丙烯与极性单体共聚及水介质聚合等方面的研发进展;讨论了聚丙烯催化剂的前景。     

Hazardous waste management problem: The case for incineration

We define the hazardous waste management problem as the combined decisions of selecting the disposal method, siting the disposal plants and deciding on the waste flow structure. The hazardous waste management problem has additional requirements depending on the selected disposal method. In this paper we focus on incineration, for which the main additional requirement is to satisfy the air pollution standards imposed by the governmental restrictions. We propose a cost-based mathematical model in which the satisfaction of air pollution standards is also incorporated. We used the Gaussian Plume equation in measuring the air pollution concentrations at population centers. A large-scale implementation of the proposed model within Turkey is provided.