二氰基取代的四硫富瓦烯硫杂冠醚衍生物的合成及性质研究

在甲苯溶液中,在亚磷酸三乙酯存在下,采取高度稀释的方法,使4,5-二氰基-1,3-二硫杂环戊二烯-2-酮分别和多缩硫杂冠醚进行交叉偶联反应,成功地得到了不对称的2,3-二氰基四硫富瓦烯衍生物。用1HNMR、MSI、R和EA表征了其结构,并用循环伏安法研究了它们的电化学性质,用1HNMR初步评价了衍生物对钠离子的配合性能。     

Lattice-based key exchange on small integer solution problem

In this paper, we propose a new hard problem, called bilateral inhomogeneous small integer solution （Bi-ISIS）, which can be seen as an extension of the small integer solution problem on lattices. The main idea is that, instead of choosing a rectangle matrix, we choose a square matrix with small rank to generate Bi-ISIS problem without affecting the hardness of the underlying SIS problem. Based on this new problem, we present two new hardness problems： computational Bi-ISIS and decisional problems. As a direct application of these problems, we construct a new lattice-based key exchange （KE） protocol, which is analogous to the classic Diffie- Hellman KE protocol. We prove the security of this protocol and show that it provides better security in case of worst-case hardness of lattice problems, relatively efficient implementations, and great simplicity.     

大内跨小边跨框架结构预应力筋优化布置方法

预应力筋的优化布置是大内跨小边跨的多跨预应力混凝土框架结构合理设计计算的关键.为满足控制截面承载力最大的需要,以往常将大跨所需预应力筋布置为连续曲线,并按水平直线延伸通过其相邻的两小跨,按这种布置方式仅使大跨内产生竖向向上的预应力等效荷载,可较好平衡大跨的竖向外荷载;而若将大跨及相邻的两小跨统一考虑,预应力筋按连续曲线布置,张拉产生的预应力等效荷载不但可有效平衡大跨的竖向外荷载而且也可平衡小跨的竖向外荷载,可以使荷载平衡得到优化实现.以一典型工程为例,分析了在相同条件下两种预应力筋布置过程中张拉引起的综合弯矩、主弯矩和次弯矩的分布和量值上差异,比较了两类布筋形式对正截面承载力计算结果的影响,验证了对大内跨小边跨框架结构统一考虑后整体上按三段连续正反抛物线预应力筋布置的合理性.     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

电控柴油机分缸均衡控制算法及试验

柴油机各个气缸的进气量、喷油量、燃烧等存在差异,导致气缸间存在做功差异,直接影响柴油机转速的平稳性以及排放性能等。针对位置式电控柴油机,采用PI闭环控制,通过瞬时转速信号识别并计算各缸的工作差异,利用分缸均衡控制算法对油量进行补偿修正。试验结果显示低转速稳态工况转速波动由7 r/min降至3 r/min,各缸工作不均匀度由±5 r/min降至±2 r/min,在瞬态过程和高转速3 400 r/min时该算法仍然适用有效。     

2-（4-氯苯氨基）甲基苯酚降解的动力学研究

采用高效液相色谱技术,开展了Fenton试剂对2-（4-氯苯氨基）甲基苯酚（CMP）的氧化降解动力学的研究。考察了初始双氧水摩尔浓度、亚铁离子摩尔浓度和温度等因素对CMP降解速率的影响,结果表明,当双氧水摩尔浓度、亚铁离子摩尔浓度增大和温度升高时,CMP的氧化速率明显加快。在30~45℃的温度范围内,其氧化降解符合假一级反应动力学模型,反应的表观活化能Ea为102.90kJ/mol。     

Oxidation Performance of Fe-Al/WC Composite Coatings Produced by High Velocity Arc Sprayed at 650 ℃

Fe-Al intermetallics with remarkable high-temperatureintensity and excellent erosion,high-temperatureoxidation and sulfuration resistance are potential lowcost high-temperature structural material.ProducingFe-Al/WC composite coating by high velocity arcspraying(HVAS)on structural materials would notonly obviate the problems faced in fabrication of thesealloys into useful shapes,but also allow the effectiveuse of their outstanding high-temperature performance,which might thus promisingly mak…     

High-temperature oxidation of pure titanium in CO2 and Ar-10%CO2 atmospheres

The oxidation behavior of pure titanium has been investigated in the temperature range of 1000 K to 1300 K in CO₂ or Ar-10%CO₂. Optical microscopy, electron probe microanalyses, and X-ray measurements on the oxide scales formed during oxidation indicate that their structures are nearly independent of temperature and the corrosion atmosphere. The scales consisted of two layers, an external one and an internal one, having a rutile (TiO₂) structure. The parabolic rate law was confirmed for growth of the external scale and the permeation depth of oxygen in titanium with apparent activation energies of 266 and 226 kJ/mol, respectively. The rate-determining diffusion species in the oxidation processes are discussed.     

20G高压锅炉管裂纹原因分析

对20G高压锅炉管产生裂纹的原因进行了分析，结果表明是冷拔工艺不当所致。     

Effects of gold plating on the resistance to high temperature discoloration of the cavity for ceramic packages

The effects of thickness and types of gold plating on the resistance to high temperature discoloration of gold plating on cavity surface of ceramic package were investigated. It was found that the thicker gold plating, the less discoloration degree for ceramic packages. Non-cyanide gold plating performed better resistance to high-temperature aging than cyanide gold plating. The relationship between the gold plating thickness and the amount of diffused Ni to the gold plating of ceramic packages with Au/Ni and Au/Ni-Co platings after heating at 420℃for 15 min was also studied. When the gold plating thickness reach 2.0 μm and 1.6 μm for Au/Ni and Au/Ni-Co plating systems, respectively, no discoloration was observed on the gold plating surface of cavity, and the corresponding diffused Ni amounts (mass fraction) are 1.0% and 0.4%, while the diffused Co to the gold plating is 0.04%.