交通信号智能控制仿真系统

根据交通信号智能控制过程中的各种复杂情况,研制了一个微观仿真的实用系统。微观仿真系统可实现交通路网编辑模块、交通参与者模型、交通信号控制模型、方案评价模型等,还能够实现多种方案的动态实时仿真,提高信号控制方案选择的有效性。     

丹东市个体私营经济发展态势分析

我市个体私营经济具有一定的经济基础,发展前景广阔,渐趋成为全市经济的重要组成部分。本文阐述了我市个体私营经济的现状,分析了发展中存在的问题,提出了加快发展所应采取的措施。     

Simulation of X-ray pulsar signals with multiphysical properties

In view of the few and discontinuous X-ray pulsar data, based on the physical properties of the X-ray pulsar real data from the Rossi X-ray Timing Explorer (RXTE) spacecraft, this paper adopts the fast iterative method and the 10 μs time transformation model, simulates the X-ray pulsar signals which have the periodic property, spectral property, and the background noise property as well as a variety of delay effects. We design and implement simulation software which can simulate the X-ray pulsar signals with multi-physical properties. The results of comparing the real data and simulation data in the same situation show that the simulation noises and the actual noises have the same distribution, that the period stability of the simulated X-ray pulsar data agrees with the real data, with the error of only 0.43％, in different energy levels, that the simulated data's integrated profile and the real data's standard profile are highly correlated with the Pearson correlation coefficient of 0.99, and that under the 10μs time transformation model, the time conversion accuracy of the simulation data can reach 10^-7s, the error between the simulation and the real data being just only 10^-7s, which meets the time transformation accuracy. Therefore, the proposed method can realize the high-fidelity simulations and generate the continuous pulsar signal with many physical properties.     

基于PRONY模型的谐波检测

信号的去噪问题一直是信号检测的一大难题,而要检测的信号往往却存在不同的随机噪声。在分析周期信号的基础上,提出了一种基于PRONY模型的周期信号分析法。经过对周期短(窄)脉冲信号的实验,这种直接构造的PRONY算法在周期信号中能达到有效、准确的分析结果。     

高能同步辐射光源逐束团束流位置测量电子学研制

基于高能同步辐射光源（HEPS）储存环,研制了一套逐束团束流位置测量（BPM）电子学系统,电子学的硬件部分由模拟信号采集板卡和数字信号处理板卡组成,软件部分由底层固件和顶层应用软件组成。系统的采样频率为500 MHz,带宽为1 GHz,对来自储存环BPM探头的4路模拟信号进行数字化,得到束团幅度数据,利用ZYNQ芯片计算出每个束团在真空管道中的位置。逐束团BPM电子学在实验室的测试结果为：输入信号峰峰值小于1.8 V时ADC通道非线性度小于1%,无杂散动态范围约60 dB,灵敏度系数取8.26 mm时位置分辨率优于10 μm,测试结果满足HEPS逐束团BPM的需求。     

A ctivation measurement of neutron distribution in intermediate energy heavy ion target area

The distribution of neutrons produced by the reaction of 50MeV/u ^12C-ion on a thick Cu target are studied.The neutrons are measured with threshold activation detectors.Al.F,C,Al and In activation samples were used to measure neutrons with energy greater than 7,11,20,50MeV and thermal neutrons,respectively,The fluence rate,energy and angular distributions of neutrons,total neutron yield of 12C-ion and the emission rate in the forward direction of neutrons over 11 and 20MeV were obtained.     

High-speed ground moving target detection research using triangular modulation FMCW

The frequency modulated continuous wave (FMCW) radar has the characteristics of low probability of interception, good hidden property and the ability to counter anti-radiation missiles. This paper proposes a new method for high-speed ground moving target detection (GMTD) using triangular modulation FMCW. According to the characteristic of the opposite range shift induced by the upslope and downslope modulation FMCW, the upslope and downslope are imaged, respectively. After compensation of continuous motion of the platform and time difference between upslope and downslope signals for imaging, the moving target can be detected through displaced phase center antenna (DPCA) technology. When the moving target is detected, the moving target image is extracted, and correlation processing is used to obtain the range shift, which can be used to estimate the target radial velocity, and further to find the real position of the target. The effectiveness of this method is verified by the result of computer simulation. __________ Translated from Journal of Xidian University, 2008, 35(4): 586–591 [译自: 西安电子科技大学学报(自然科学版)]     

一种大动态检测输入前端设计

一种基于小信号处理、无源网输入、数字化处理、智能化操作的方法,以求获得较好的灵敏度和极大的测量动态范围的测量前端电路设计。     

DSP人机接口电路设计

对TMS320F2812型数字信号处理器的硬件资源和相应的外部设备进行了详细的介绍,分析了19264液晶显示器的接口电路、控制系统,以及按键的结构.在此基础之上,利用TMS320F2812型数字信号处理器的GPIO口对按键电路和液晶接口电路进行了设计,通过调试和仿真后发现本方案可行.     

基于粒子滤波的多区域辨识性建模跟踪算法

为使跟踪算法中的目标模型不被相同特征的背景像素所干扰,在粒子滤波的框架下引入多区域辨识性建模机制,提出1种新的鲁棒的目标跟踪算法。提出的算法侧重能够辨识前景与背景的最有效信息,把目标物体划分为多个子区域。通过统计子区域与背景类别的类内/类间特性选择出最具信息量的子区域。在选出的目标区域基础上,提出的算法以贝叶斯的方式同时考虑图像信息及空间信息,建立具有辨识性的目标表观模型,并在粒子滤波的更新阶段用以估量目标的所在区域。在一系列具有挑战性的视频序列上的实验结果证明了,在许多复杂场景下,提出的方法与传统的粒子滤波跟踪器相比的鲁棒性以及有效性。