Spectral color reproduction minimizing spectral and perceptual color differences

In this article, we are combining minimization criteria in the colorant separation process for spectral color reproduction. The colorant separation is performed by inverting a spectral printer model: the spectral Yule‐Nielsen modified Neugebauer model. The inversion of the spectral printer model is an optimization operation in which a criterion is minimized at each iteration. The approach we proposed minimizes a criterion defined by the weighted sum of a spectral difference and a perceptual color difference. The weights can be tuned with a parameter α ∞ [0, 1]. Our goal is to decrease the spectral difference between the original data and its reproduction and also to consider perceptual color difference under different illuminant conditions. In order to find the best α value, we initially compare a pure colorimetric criterion and a pure spectral criterion for the reproduction, then we combine them. We perform four colorant separations: the first separation will minimize the 1976 CIELAB color difference where four illuminants are tested, the second separation will minimize an equally weighted summation of 1976 CIELAB color difference with the four illuminants tested independently, the third colorant separation will minimize a spectral difference, and the fourth colorant separation will combine a weighted sum of a spectral difference and one of the two first colorimetric differences previously introduced. This last colorant separation can be tuned with a parameter in order to emphasize on spectral or colorimetric difference. We use a six colorants printer with artificial inks for our experiments. The prints are simulated by the spectral Yule‐Nielsen modified Neugebauer model. Two groups of data are used for our experiments. The first group describes the data printed by our printing system, which is represented by a regular grid in colorant space of the printer and the second group describes the data which is not originally produced by our printing system but mapped to the spectral printer gamut. The Esser test chart and the Macbeth Color Checker test chart have been selected for the second group. Spectral gamut mapping of this data is carried out before performing colorant separation. Our results show improvement for the colorant separations combining a sum of 1976 CIELAB color difference for a set of illuminants and for the colorant separation combining a sum of 1976 CIELAB color difference and spectral difference, especially in the case of spectral data originally produced by the printer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 494–504, 2008     

Kinetic modelling of textural changes in ready-to-eat breakfast cereals during soaking in semi-skimmed milk

Summary Ready‐to‐eat breakfast cereals immersed in milk undergo undesirable changes in texture because of sudden moisture uptake. The textural changes are ascribable to a plasticizing effect of water, which modifies the mechanical strength of products by softening the starch/protein matrix. In this work, some textural parameters of different cereal flakes were derived from the force–displacement curves monitored during 300 s of immersion in milk. Hardness loss, deformability increment and changes in the force–displacement curve profile were calculated and plotted against soaking time. The application of a sugar coating process to a model cereal flake increased the initial product hardness and improved the preservation of the textural parameters during immersion. The Peleg model closely fitted the experimental data, with regression coefficients from 0.967 to 0.999.     

Parametric and nonparametric Bayesian model specification: A case study involving models for count data

In this paper we present the results of a simulation study to explore the ability of Bayesian parametric and nonparametric models to provide an adequate fit to count data of the type that would routinely be analyzed parametrically either through fixed-effects or random-effects Poisson models. The context of the study is a randomized controlled trial with two groups (treatment and control). Our nonparametric approach uses several modeling formulations based on Dirichlet process priors. We find that the nonparametric models are able to flexibly adapt to the data, to offer rich posterior inference, and to provide, in a variety of settings, more accurate predictive inference than parametric models.     

Cross-Border Migration of Hong Kong Residents Under the 'One Country, Two Systems' Policy

Hong Kong is known as a migrant city because its population was sourced from mainland China, and because there has always been outflows of people to overseas countries, especially from the mid-1980s to mid-1990s. Emigration to mainland China has become a significant recent trend. This article discusses this phenomenon in the theoretical contexts of migration and trans-border residential development. It contends that the trend will intensify more quickly than other cross-border movements because the two systems are separated by a political border within one country, and because there are common cultural ties and rapid economic integration.     

Adaptive control in a heating vessel: A comparative study

This paper presents experimental results obtained in temperature adaptive control of a heating vessel. A non-linear model of the process showed that the feed flow rate causes severe variations in time constant and process gain. An extended horizon self-tuning controller and two different model reference adaptive controllers were tested. The influence of design parameters on control performance for each algorithm was assessed. The control system was disturbed with load and setpoint changes.     

Influence of Drying Conditions on Ascorbic Acid during Convective Drying of Whole Persimmons

Degradation kinetics of food constituents may be related to the matrix molecular mobility by glass transition temperature. Our objective was to test this approach to describe ascorbic acid degradation during drying of persimmons in an automatically controlled tray dryer with temperatures (40 to 70°C) and air velocities (0.8 to 2.0 m/s) varying according a second order central composite design. The Williams-Landel-Ferry model was satisfactorily adjusted to degradation curves for both control strategies adopted—constant air temperature and temperature fixed inside the fruit. Degradation rates were higher at higher drying temperatures, independent of the necessary time to attain the desired moisture content.     

Mathematical modelling of the alcoholic fermentation of glucose by Zymomonas mobilis mobilis

The kinetics of alcoholic fermentation of a strain of Zymomonas mobilis, isolated from sugarcane juice, has been studied with the objective of determining the constansts of a non-structured mathematical model that represents the fermentation process. Assays in batch and in continuous culture have been carried out with different initial concentrations of glucose. The final concentrations of glucose, ethanol and biomass were determined. The following kinetic parameters were obtained: μ_max, 0·5 h^?1; K_s, 4·64 g dm^?3; P_max, 106 g dm^?3; Y_x/s, 0·0265 g g^?1; m, 1·4 g g^?1 h^?1; α, 17·38 g g^?1; β, 0·69 g g^?1 h^?1.     

深圳福田河污染治理资源优化配置

根据不同河段的水域功能将污染严重的福田河自上而下划分为三个水污染控制单元，针对每个单元的不同环境目标和污染负荷预测得到相应的污染净化率，依此建立资源优化配置模型，由该模型获得优化决策，以期合理利用环境容量，确定最小净化费用，兴修必要的治理设施，从而保证在经济高速发展的同时，有效地控制福田河的污染问题。     

Biophysical Model of Larval Yellow Perch Advection and Settlement in Lake Michigan

Potential for large-scale physical transport processes to affect recruitment of Lake Michigan yellow perch (Perca flavescens) was studied by examining the variation in larval distribution, growth rate, and settlement during June–August 1998–2003 using a 3D particle transport model linked with an individual-based bioenergetics growth model. In all years, virtual larvae were released nearshore in southwestern Lake Michigan, a known and important spawning region for yellow perch. For any given year, the same circulation pattern and water temperature either promoted or reduced yellow perch settlement depending on the consumption rates and settlement size chosen in the growth model. Increased consumption increased the number of settled larvae and expanded the total area where larvae settled, whereas increased settlement size reduced the number of settled larvae and reduced the overall settlement area. Interannual variability in circulation patterns and water temperature also resulted in contrasting larval settlement rates, settlement locations, and size of settlement areas between years. Model predictions were most consistent with field observations of age-0 yellow perch from Illinois and Michigan waters when settlement was assumed to occur at 50 mm. Moreover, our model suggests that larvae originating from southwestern Lake Michigan can recruit anywhere within the southern basin and even in the northern basin. Future model improvement will require information on the relative contribution of various sectors to the larval pool, their distribution with reference to the hydrodynamic landscape, the feeding and growth of yellow perch during their pelagic phase, and the size at transition to demersal stage.     

Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007