Kinetic study of the hydrolysis of isocyanic acid in the gas phase

The hydrolysis of isocyanic acid in the gaseous phase has been investigated at temperatures between 553 and 613 K by mass spectrometry and evaluated to obtain the corresponding kinetic data. The reaction order and reaction constant have been determined. Finally, the influence of water on the catalysed formation of melamine from isocyanic acid under the operating conditions employed has been investigated in order to determine whether there is a need to try the process gas.     

Mechanization techniques for poplar development in Turkey

Annual commercial poplar wood production in Turkey is about 3.6 million cubic meters, half of which comes from hybrid poplar I-214. The poplar plantation areas of Turkey are 70% of the poplar plantation areas of the Near and Middle Eastern countries, and nearly 5% of the world. In this study, unit times of standard operations were investigated in poplar nurseries and plantations in which new mechanical technology was applied and compared with traditional methods. Analyses of unit times were made on 11 treatments for poplar nurseries and nine treatments for poplar plantations; some new methods are also recommended. Mechanization methods based on new technologies give promising results in poplar nurseries and plantations.     

海底沉积物中天然气水合物生成和分解规律研究进展

对国内外有关海底沉积物中天然气水合物生成和分解规律方面的研究进行了详细调研,得到如下结论:天然气水合物的生成和分解条件在海底沉积物中与在井筒、管道中有明显不同,其主要原因是多孔介质中流体与孔隙壁面间的界面效应对海底沉积物中天然气水合物的形成条件会产生明显影响;在海底沉积物中天然气水合物生成和分解条件的数值模拟技术研究方面,研究者大都假设以天然气水合物作为盖层的成藏类型,借助常规油气藏数值模拟技术进行模拟研究;影响海底沉积物中天然气水合物生成和分解条件的因素很多,因此海底沉积物中天然气水合物生成和分解规律研究必须借助试验模拟、数值模拟和现场测试相结合的综合方式进行。该调研成果可为今后天然气水合物经济有效开采技术方案选择和进行天然气水合物危害控制等提供参考。     

ZnO压敏陶瓷最佳掺杂含量的理论计算

从对电子薄膜材料研究中得到的最佳掺杂含量定量理论推广到ZnO陶瓷材料。该理论建立了电子薄膜材料的某一物理性能与晶体结构、制备方法和掺杂剂含量之间的联系，给出了一个能够拟合实验曲线的具有确定物理意义的抛物线方程。该方程的极值点确定了最佳掺杂含量与晶体结构和制备方法之间的定量关系，进而得到了一个掺杂最佳含量的表达式。系统地分析了ZnO压敏陶瓷的掺杂改性的实验结果，应用此表达式定量计算了ZnO压敏陶瓷的最佳掺杂含量，定量计算的结果与实验数据相符合。该理论也适用于其他薄膜材料最佳掺杂含量的理论计算。     

Experimental Study of Concrete Subjected to Explosive Loading

The main subject of this paper is to demonstrate the response of structural concrete to different imposed strain rates. Attention is focused on the strain rate about 10^-2 s ^-1>, where some technical difficulties are experienced when an exact determination of mechanical properties for quasi-brittle materials is attempted. The design of a measurement system, which realizes computer acquisition, analysis, and graphic representation of data, is also presented.     

Cyclamate intake and cyclohexylamine excretion are not related to male fertility in humans

Cyclamate and its metabolite cyclohexylamine affect male fertility in high dose animal studies, but this affect has not been investigated in epidemiological studies. This paper reports the first epidemiological study designed to investigate the possibility of a relationship between cyclamate and cyclohexylamine and male fertility in humans, in which 405 cases of clinically defined infertility in men and 379 controls were surveyed. Semen evaluation, urine analysis for cyclamate and cyclohexylamine and dietary questionnaires were compared between cases and controls. No evidence was found of a significant association between cyclamate intake and male infertility; neither high cyclamate nor high cyclohexylamine excretion were associated with elevated risk. The lack of association remained after adjusting by age, area of residence, education, total energy intake and other variables. No significant correlations were observed between cyclamate intake, metabolism or excretion, and sperm count and motility. The results demonstrate no effect of cyclamate or cyclohexylamine on male fertility at the present levels of cyclamate consumption.     

高炉冷却壁失效原因研究

本文针对安钢高炉冷却壁破损的形式、原因进行研究分析,探讨了冷却壁的结构、材质、加工与安装工艺对其寿命的影响。介绍了安钢高炉炉役后期冷却壁的维护生产实践。     

加氢反应器内构件—急冷箱的试验研究

急冷箱是加氢反应器的重要内件。洛阳石化工程公司设备研究所在认真分析UOP急冷箱的基础上,对其结构进行了改进,开发出了新型急冷箱(已获专利)。经过流体力学、传质、传热性能对比试验、分析,新型急冷箱结构性能优良。     

埕东油田埕913断块沙三段砂砾岩油藏储层特征研究

以井点分析为基础，利用棱磁共振测井等资料，对埕东油田埕913断块沙三段储层岩石进行分类；应用岩石铸体薄片、扫描电镜、压汞、CT等资料，以砂砾岩储层孔隙结构特征为重点，对其储层特征进行了研究。通过CT分析，确定了储层孔隙度，为落实储量规模提供了依据。     

Empirical Evaluations of Usage-Based Reading and Fault Content Estimation for Software Inspections

This thesis describes six empirical investigations of two techniques applied to software inspections, namely reading techniques and fault content estimation techniques. The first part of the thesis presents a series of experiments of a novel reading technique called usage-based reading. The second part investigates fault content estimation applied to the software inspection process. The estimation methods used are capture-recapture and curve fitting.