Feasibility study on the use of polyallyldiglycol-carbonate cell dishes in TUNEL assay for alpha particle radiobiological experiments

In the present work, we have studied the feasibility of a method based on polyallyldiglycol-carbonate (PADC) films to investigate the effects of alpha particles on HeLa cervix cancer cells. Thin PADC films with thickness of about 20 μm were prepared from commercially available CR-39 films by chemical etching to fabricate custom-made petri dishes for cell culture, which could accurately record alpha particle hit positions. A special method involving “base tracks” for aligning the images of cell nuclei and alpha particle hits has been proposed, so that alpha particle transversals of cell nuclei can be visually counted. Radiobiological experiments were carried out to induce DNA damages, with the TdT-mediated dUTP Nick-End Labeling (TUNEL) fluorescence method employed to detect DNA strand breaks. The staining results were investigated by flow cytometer. The preliminary results showed that more strand breaks occurred in cells hit by alpha particles with lower energies. Moreover, large TUNEL positive signals were obtained even with small percentages of cells irradiated and TUNEL signals were also obtained from non-targeted cells. These provided evidence for the bystander effect.     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.     

静态电子轨道衡组成部分解析及其合理选择

阐述静态电子轨道衡诸多优点;工作原理、允许误差及误差分配;轨道衡的结构组成部分、解析各部分的工作特性及技术指标要求;合理选配及推荐实例.     

Drainage and imbibition relative permeabilities at near miscible conditions

The changes in gas and oil relative permeabilities as miscibility is approached are of particular importance in multi-contact miscible displacements. These changes are a function of the detailed phase behaviour of the fluids and their physical properties as well as the properties of the porous medium itself.In this work, we investigate the behaviour of two-phase drainage and imbibition relative permeability curves of four, different, equilibrated fluid pairs from a three component, two-phase system (cyclohexene, isopropyl alcohol and water) that exhibits a critical point at ambient conditions. The tie-lines of these fluid pairs are at varying distances from the system's critical point. Equilibrium phase compositions and interfacial tensions (IFT) were determined for each of the four fluid pairs. Dynamic displacements were then performed in a linear two dimensional, bead-pack. Unsteady state, drainage and imbibition relative permeabilities were determined for the various pre-equilibrated mixtures. The experimental results show a clear change in relative permeability as the fluid pairs approach the critical point. As the interfacial tension decreases the non-wetting phase relative permeability increases more rapidly than the wetting phase relative permeability and hysteresis becomes less important.Two correlations [Coats, K.H., 1980. An equation of state compositional model: SPE J, 20 (5): 363-376.; Whitson, C.H., and Fevang, Ø., 1997. Generalized pseudo pressure well treatment in reservoir simulation. In Proc., IBC Conference on Optimization of Gas Condensate Fields.], commonly used to model the changes in relative permeability with interfacial tension, and the development of miscibility, were compared with the experimental data. The Coats correlation, which uses a single adjustable parameter to model the changes in both relative permeabilities and residual oil saturation as a direct function of the IFT, yielded an unacceptable match to the experimentally determined fractional flow. However the Whitson–Fevang correlation, which relates the changes in relative permeability to the capillary number using two adjustable weighting functions, presents a satisfactory match.     

多极化目标特性测量雷达跟踪接收机的设计与性能分析

基于多极化目标特性测量雷达的设计，结合实际应用，给出了多极化目标特性测量雷达跟踪接收机的设计与工程实现，并对影响跟踪精度的因素进行了分析。     

被动累积~(222)Rn-~(222)Rn探测器

本文采用 2只扩散杯 ,一只选择渗透率较大的滤膜 ,使2 2 2 Rn和2 2 0 Rn能很容易的进入。另一只选择渗透率较小的滤膜 ,该滤膜只允许2 2 2 Rn进入 ,半衰期较短的2 2 0 Rn被阻挡在外面。通过不同滤膜扩散率的差异 ,改变探测器的空气交换率 ,从而达到同时测量2 2 2 Rn和2 2 0 Rn的目的     

各种状态的液体通过核孔膜的规律

介绍了液体通过核孔膜规律方面取得的新认识，包括：（１）纯净液体通过核孔膜的规律；（２）核孔膜测定液体粘滞系数的各种方法；（３）各种物质溶液浓度的核孔膜测定；（４）液相混合物快速分离和化学分离；（５）流体中固体微粒对核孔膜的堵塞及其公式；（６）用核孔膜滤除液中各各斩规律。     

SURFACE TENSION AND BUOYANCY DRIVEN INSTABILITIES IN A LAYER OF LIQUID TIN HEATED FROM BELOW

The linear theory of Pearson (1958) and Nield (1964) is modified here to study liquid tin and include the finite thermal resistances of the bounding layers of boron nitride, copper and air (∼10^-2 torr) in the experiments of Ginde et al. (1989). The magnitude of the ΔT_c across the layer of liquid tin required for the onset of convection depends on the ratios of the thermal conductivities and thicknesses of the supporting layers of boron nitride and copper to those of the tin.

According to our theory surface tension contributes more than buoyancy to the instability observed experimentally. The critical ΔT_c observed required for the onset of convection in the layer of tin, is up to 25% lower than that predicted, which shows the layer is less stable than the theory indicates. Thus the surface of the tin was uncontaminated, or a significantly larger observed critical ΔT_c would be expected.

The boundary condition on the thermal fluctuations at the base of the supporting layer of copper does not appear to be important in these experiments. However, the thermal resistance of the boron nitride would have to be assumed to be unrealistically large to obtain agreement within experimental error with the theory.     

Interfacial tension between coexisting polymer solutions in mixed solvents and its correlation with bulk thermodynamics: phase equilibria (liquid/gas and liquid/liquid) for the system toluene/ethanol/PDMS

Vapor pressures, phase equilibria and interfacial tensions σ were measured for solutions of poly(dimethylsiloxane) (PDMS, M_w[equals]75 kg/mol and M_n[equals]50 kg/mol) in mixed solvents of toluene (TL) and ethanol (EtOH) at 30, 40, 50 and 60 °C. The experimental ternary phase diagrams can be modeled quantitatively from the determined concentration and temperature dependent binary interaction parameters χ_ij if the experimentally inaccessible composition dependence of χ_EtOH/PDMS is adjusted. The relations between σ and the equation of state of the system differ from that applying to single solvents. The exponents as well as the amplitude prefactors of the corresponding scaling laws (e.g. the dependencies of σ on the length of the tie lines or on the hump energy, i.e. on the intrusion into the two phase regime quantified in terms of Gibbs energies) change considerably with temperature. However, this variation can be reduced significantly by normalizing the independent variables. Dividing the length of the tie lines by the length for the corresponding binary subsystem proves more efficient than the distance of these tie lines from the critical point of the ternary system relative to the maximum distance of the binary subsystem. A combined normalization does not improve the situation.