自洁式超声波在线过滤器的研制

我国地表水浊度高,极大地影响基于光度法的在线分析仪器正常运行;以自主创新的在线采水过滤头为核心,提出一种新型的自洁式超声波在线过滤器,由超声波电源、采水和反冲洗模块、嵌入式控制模块等组成,具备定时定速过滤采水、超声波反冲清洗等功能;实验结果表明,过滤器能够连续地自动滤除水中的悬浮物质,并且不影响目标物的化学形态,对同一水样的浊度去除率维持在85%左右。     

基于超声波的围岩松动圈实时监测系统设计

实时地掌握围岩松动圈的范围对矿藏的安全生产具有重要的意义。利用超声波探测的灵活性和准确性,本文提出了一种基于超声波的围岩松动圈监测系统设计方法。此方案利用超声波在岩体中的传播速度与岩体的受力状态和裂隙程度的关系来实时地监测围岩松动圈的情况,具有方便、灵活、易于操作等特点。     

Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

Accelerated sintering of PtRh/Al2O3 catalysts in an oxygen periodic pulse flow

PtRh catalysts were prepared by coimpregnation, with chlorine-free precursors of a -alumina. They were sintered at 973 K under a continuous flow of O₂ (1% in Ar or air) or of a flow of Ar into which pulses of O₂ were injected periodically. Under the latter conditions the sintering was significantly accelerated, particularly for a certain value of the period of O₂ pulses.     

饮用水中天然有机物的分析与表征方法

天然有机物(NOM)是一类分布广泛、成分复杂的有机混合物,可严重影响饮用水的处理效率,并可能对出水水质产生严重的不利影响。因此,为了改进和优化饮用水的处理过程,在研究和实际应用阶段对NOM进行表征和定量以了解其结构特性和反应性具有重要意义。文中先对NOM的富集方法进行了介绍,接着梳理了不同分离方法的依据及作用,最后总结了各类表征方法的原理及应用,以期有助于对NOM和饮用水处理的深入研究。     

Analysis of the Structure and Biosynthesis of the Lipopolysaccharide Core Oligosaccharide of Pseudomonas syringae pv. tomato DC3000

Lipopolysaccharide (LPS), the major component of the outer membrane of Gram-negative bacteria, is important for bacterial viability in general and host–pathogen interactions in particular. Negative charges at its core oligosaccharide (core-OS) contribute to membrane integrity through bridging interactions with divalent cations. The molecular structure and synthesis of the core-OS have been resolved in various bacteria including the mammalian pathogen Pseudomonas aeruginosa. A few core-OS structures of plant-associated Pseudomonas strains have been solved to date, but the genetic components of the underlying biosynthesis remained unclear. We conducted a comparative genome analysis of the core-OS gene cluster in Pseudomonas syringae pv. tomato (Pst) DC3000, a widely used model pathogen in plant–microbe interactions, within the P. syringae species complex and to other plant-associated Pseudomonas strains. Our results suggest a genetic and structural conservation of the inner core-OS but variation in outer core-OS composition within the P. syringae species complex. Structural analysis of the core-OS of Pst DC3000 shows an uncommonly high phosphorylation and presence of an O-acetylated sugar. Finally, we combined the results of our genomic survey with available structure information to estimate the core-OS composition of other Pseudomonas species.     

汽车喷烤漆自动控制系统

本文通过研究目前汽车烤漆房的实际运行情况，提出了一种汽车烤漆房喷漆自动控制系统，阐述了系统喷漆装置的构成、配合与运行原理，并构成了实际试验系统。     

超声加工中振幅衰减的控制

超声加工过程中，振动系统的振幅会发生衰减，造成加工过程不稳定，生产率降低。针对振幅衰减的原因，提出了先进行频率跟踪，然后在谐振状态下再提高振幅的方案，使振幅不因加工状态的变化而变化，从而保证加工质量，提高生产率。     

机械活化-湿化学合成LiMn2O4的组成、结构与表征

以MnO2和LiOH·H2O为原料,采用机械活化与湿化学集成的方法,在水溶液中直接合成了结晶态的尖晶石锂锰氧化物.当锂含量介于3.78%～4.35%之间时,所得锂锰氧化物为纳米级球形粉末,以尖晶石结构为主,含极少量的Mn3O4杂相;在300～800℃温度范围内热处理后,Mn3O4杂相消失,尖晶石结构更趋完善.所合成的含锂5.80%的高锂样品则以LiMnO2层状结构为主,含少量Mn3O4杂相,其SEM形貌为片状;在300～700℃下热处理8 h后,层状LiMnO2转变成尖晶石LiMn2O4,Mn3O4杂相峰明显减弱并随热处理温度的升高而消失;当温度升高至700～800℃时,开始出现缺锂的Li1-xMn2O4相.结果表明:该法制备锂锰氧化物可实现锂、锰、氧在原子级水平的均匀混合,所得产物的热稳定性能良好,其化学计量组成与结构易于调整和控制.     

Q390高强抗震钢板残余应力检测方法对比及分析

利用盲孔法、X-Ray法、中子衍射法和超声法对Q390高强抗震板及U形弯曲件进行残余应力检测,并对这4种方法测试得到的应力结果进行分析研究。结果表明,以上4种检测方法均要考虑其特定的检测应用范围,X-Ray法针对钢板表面下微米级深度的微米级晶格尺度范围局部点应力进行检测,中子衍射法可在毫米级尺度局部区域进行应力检测,盲孔法反映的是因毫米尺度钻孔导致的钢板表面孔周边的应力变化,超声法则可以通过连续扫描检测整个钢板残余应力的宏观分布变化。因此,对于工业钢板,超声法测试残余应力更加科学、合理、准确。同时,通过U形试样建立稳定的应力应变场,利用超声设备使用不同参考态对Q390高强抗震板弯曲件及退火弯曲件进行测试,结果表明,测试参考态的选取对应力测试结果影响很大,材料各向异性的影响对应力测试结果不可忽视。