高能超声处理对锡锑包晶合金凝固组织的影响

在锡锑包晶合金的凝固过程中导入高能超声，不仅显著细化α相和β相晶粒组织，同时使具有立方晶体特征的β相组织有明显的球化趋势，消除了密度偏析，分析了高能超声细化凝固组织的机理。     

Eu(DMBM)_2(2,2′-bipy)NO_3的合成与荧光光谱

本工作首次合成了Eu(DMBM)_2(2,2′-bipy)NO_3(DMBM=二对甲氧基苯甲酰甲烷,2,2′-bipy-2,2′-联吡啶)。通过元素分析、热谱、电导率、红外和拉曼光谱、质子核磁共振谱对所合成化合物进行了表征。在77K测定了固体配合物的激发光谱和发光光谱。光谱数据说明配合物含有两种Eu(Ⅲ)格位。配合物中三种配体在Eu(Ⅲ)周围的分布情况略有不同,显示出不同的晶体场效应。光谱数据表明,配合物中Eu(Ⅲ)格位属于非中心对称的点群C_1或C_3或C_2。     

Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

Thermal Characterization of 1.3 μm InAsP/InGaAsP Ridge Waveguide MQW Lasers Based on Spectroscopy Method

An experimental way to analyze the thermal characterization of semiconductor lasers based on spectroscopy method under pulse driving conditions has been developed. By using this way the thermal characteristics of strain compensated 1.3 μm InAsP/InGaAsP ridge waveguide MQW laser diodes have been investigated. Results show that by measuring and analyzing the lasing spectra under appropriate driving parameters and temperature ranges, the thermal resistance of the laser diodes could be deduced easily. A higher thermal resistance of 640 K/W has been measured on a narrow ridge laser chip without soldering. Other thermal and spectral properties of the lasers have also been measured and discussed.     

电力变压器局放超声传感器及其应用

作者研制成一种带光纤的电力变压器局放超声PZT传感器.文中分析了它的灵敏度与宽频带特性,介绍了原理、结构设计、实验数据及现场成功实例.理论与实验研究表明:具有这种高灵敏传感器的超声定位系统是确定电力变压器绝缘故障部位的一种方法.     

聚苯硫醚酰胺的合成与表征

用4-氯苯甲酰4′-氯苯胺和硫化钠为原料在常压下合成了聚苯硫醚酰胺,并对其进行了表征。结果表明所合成的产物为结晶性聚合物,并且有较高的热稳定性。     

超声波处理石油污水的实验研究

考察了在不同空化状态下超声波对石油污水化学耗氧量(COD)的降低作用。探讨了时间、功率、pH值及温度对石油污水化学耗氧量降低作用的影响。结果表明，石油污水化学耗氧量的降低率随着时间增大而增大，随着温度、pH值的增加而减小，随着功率的增加，先增加，然后再减小。     

掺杂聚苯胺的表面接枝共聚改性

化学氧化法制备的聚苯胺表面的亲水性差，本文在本征态和不同酸掺杂志聚苯胺的表面上接枝共聚丙烯丙烯酸和丙烯酰胺，明显地改善了聚苯胺的表面亲水性。结果显示，聚苯胺表面经过等离子体处理后，有利于丙烯酸和丙烯酰胺在聚苯胺表面上的接枝共聚，随着接枝量增多，导电率则随之有所下降，此外，利用ＳＥＭ和反射ＩＲ表征了改性反聚苯胺表面的形态和结构。     

模糊聚类在三维地震参数处理中的应用

三维地震参数是一个庞大的三维数据体，能从不同侧面反映储集层的特征。通过对三维地震参数的分析，可以评估油藏表征的参数（沉积相、构造、生长历史、流体饱和度等）。针对传统的聚类方法不能很好地综合考虑各个参数之间的相似程度，提出了用模糊C-均值聚类（fuzzy c-means clustering，简称FCM）对三维地震参数进行处理。从三维地震参数和油藏表征参数之间的关系出发，采用模糊C-均值聚类方法对三维地震参数进行处理，依此评估油藏表征的参数。测试结果表明，模糊C-均值聚类方法能够对三维地震参数进行较为准确的分类，并为储集层的研究提供了很好的依据。     

On using peak amplitude and rise time for AE source characterization

Acoustic Emission (AE) signals, which are electrical version of acoustic emissions, are usually analysed using a set of signal parameters. The major objective of signal analysis is to study the characteristics of the sources of emissions. Peak amplitude(P _a ) and rise time(R _t ) are two such parameters used for source characterization. In this paper, we theoretically investigate the efficiency ofP _a andR _t to classify and characterize AE sources by modelling the input stress pulse and transducer. Analytical expressions obtained forP _a andR _t clearly indicate their use and efficiency for source characterization. It is believed that these results may be of use to investigators in areas like control systems and signal processing also