1/3码的动态CMOS全自检电路的设计

自检测电路设计方法有多种多样,本文中介绍了TSC电路的概念,并采用1/3码的动态CMOS设计TSC电路,通过在Cadence环境下仿真,仿真结果表明本设计可行。     

A novel method for determination of polyester end-groups by NMR spectroscopy

An efficient, convenient and quantitative method for characterising polyester end-groups is described. We have found that trichloroacetyl isocyanate (TAI) reacts rapidly and quantitatively with both carboxyl [C(O)OH] and hydroxyl (OH) chain ends to form derivatives that can be readily determined by ¹H NMR spectroscopy. The TAI capped end-groups give rise to characteristic imidic NH resonances in a normally clear region of the ¹H NMR spectrum [δ∼10-11.5 for C(O)-O-C(O)-NH-C(O)CCl₃ from C(O)OH, δ∼8-9 for O-C(O)-NH-C(O)CCl₃ from OH]. The method has been successfully applied to quantitative determination of the end-groups of a wide variety of oligomeric polyesters. It has also been applied to higher molecular weight polyesters including commercial, bottle grade, poly(ethylene terephthalate) (PET) and PET based copolyesters (e.g. PETG).     

亚毫米波系统探测距离分析

本文提出了距离的概率分布函数作为系统的性能指标，提高了系统评价的准确性。     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

采用模数转换技术提高脉冲激光测距的测时精度

针对脉冲激光测距中计数量化误差影响测时精度的问题,本文提出了采用模数转换技术提高测时精度的方法,并进行了可行性与精度分析,理论与实践结果均表明,该方法易于实现,能够容易地将计数量化误差减少若干个数量级。     

流动注射分光光度法测定钴

研究了将ＰＡＮ用于流动注射（ＦＩＡ）分光光度法测定微量钴，在５６０ｎｍ处绘制标准曲线，线性范围为０～４５μｇ／ｍｌ，相关系数０．９９６，方法的相对标准偏差（ＲＳＤ）小于３％，加标回收率为９５％～１０５％，进样频率８０次／ｈ。本法简单快速，用于面粉、分子筛，铝合金测定结果令人满意。     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

羰基镍粉末生产中羰基镍测定的发展状况与应用

阐述了国内外羰基镍测定的各种方法以及在工业与环境保护等领域的应用状。     

石油一厂东蒸馏装置的技术改造

介绍抚顺石油化工公司石油一厂东蒸馏装置的改造情况，通过技术改造，使减压蒸馏塔由生产燃料型改造成生产石蜡－润滑油型，满足了该厂对石蜡和润滑油料的质量要求。     

在酸性介质中N-H伪酸Mannich反应机理的量子化学研究

用量子化学中的ＳＣＦ－ＭＯＡＭ１方法，全优化计算了以苯并唑酮为伪酸组分的（Ｎ－Ｈ酸）Ｍａｎｎｉｃｈ反应的反应物、过渡态和产物络合物的分子几何构型、电子结构和生成热。根据计算所得各反应的活化能，提出了该反应在酸性介质中的机理，即甲醛首先与苯并唑酮作用，其产物再与二甲胺作用生成Ｍａｎｎｉｃｈ碱，并就其缘由进行了讨论。