宽带放大器可靠性问题浅析

叙述了国产高频宽带放大器的质量和可靠性现状，详细介绍了这类产品的质量一致性检验、可靠性摸底试验和现场使用过程中出现的可靠性问题，用统计的方法得出了可靠性特征量，通过对失效样品的失效分析，总结出宽带放大器主要的失效模式和失效机理，并提出了消除和减少失效、提高宽带放大器可靠性的措施和建议。     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.     

日本关西宽带实验网印象

本文根据实地考察内容，结合宽带网络技术和业务重点及实施策略，全面介绍了日本关西宽带实验网发展背景，通信与广播电视综合应用实验和Ｂ－ＩＳＤＮ实用化实验的进展以及ＮＴＴ所起作用。文章最后就关西宽带实验网的借鉴意义提出了几方面意见。     

多制式移动终端身份感知系统研究

移动终端的合法监管是国家安全部门保障移动网络安全的重要手段,获取移动终端身份标识是实现监管的基础.首先阐述了移动终端的主要身份标识,以及监管系统相关研究现状;然后给出一种面向双频点GSM网络和WCDMA网络的多制式移动终端身份感知系统设计方案,阐明系统技术原理与实现方法,并提出对该系统进行优化的技术方案;最后进行测试,验证了方案的可行性.     

一种变压器巴伦馈电的超短波紧耦合阵列天线

紧耦合阵列天线(Tightly Coupled Array, TCA)具有超宽带、低剖面、宽角扫描等特点,近年来受到国内外学者的广泛关注。然而,在甚高频(VHF)、特高频(UHF)频段TCA 由于馈电网络设计困难等原因现有的研究报道很少。为了填补这一空白,本文设计并测试了一款变压器巴伦馈电的TCA,利用变压器巴伦解决了单元平衡馈电困难问题,同时采用短路枝节抑制E面共模谐振,采用频率选择表面(FSS)匹配层改善宽角扫描阻抗匹配。实测结果表明,该天线在110~520 MHz 频带内、±40°扫描角范围内电压驻波比<2.5,和仿真结果吻合。     

一种加载铁氧体磁环的高功率宽带巴伦

针对高功率天线的差分馈电和阻抗匹配问题,文中提出了一种基于同轴线结构加载铁氧体磁环的宽 带巴伦模型。双同轴线具有阻抗变换功能和较好的功率承载能力,铁氧体磁环改善了巴伦在低频时的输入匹配和 两个输出端口不平衡度。仿真和实测表明,此巴伦在0. 05~1. 24 GHz 内回波损耗低于-10 dB,去除3. 0 dB 系统插损 后单端插入损耗在1. 5 dB 以内,两端输出的相位不平衡度在5°以内,幅度不平衡度在2%以内。通过分析巴伦的电 磁热损耗场、温度场和应力形变场,验证了巴伦在高功率馈电下的工作性能,结果表明此巴伦在工作频带内能够承 受500 W 的功率。     

Analysis of frequency‐selective impedance loading of transmission lines for dual‐band couplers

This article proposes an analytical design methodology for dual‐band hybrid couplers and baluns structures for any arbitrary frequency ratio using a stub‐loaded transmission line. An analysis of changing the impedance behavior of the stub, is carried out for the two bands of operation, which along with a dispersive analysis, emphasizes certain conditions where the existing methodology is not applicable. In addition, an extra degree of freedom has been included to increase the solutions for a given frequency ratio, thus providing greater flexibility and feasibility of the proposed structure. The design methodology is experimentally validated with the design and fabrication of dual‐band branch‐line and rat‐race couplers for various commercial frequency bands. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2011.     

分布式ARP的研究实现

介绍高速IP路由器体系结构下分布式ARP的实现方法,主要阐述了ARP主从分布式控制方法和分布式ARP软件设计思想。     

DOA estimation of wideband sources without estimating the number of sources

In this paper, we propose a new technique to estimate wideband source directions from the sensor snapshots without requiring to know the number of sources present in the scenario. This work is motivated by the fact that the existing model order estimation (number of sources) techniques for wideband source scenario are either inaccurate or computationally expensive. Direction-of-arrival (DOA) estimation is realized using a beamformer framework which imposes nulls in the spatial spectrum along the source directions. The null width along the frequency axis is widened by introducing a new data dependent term into the optimization problem, thus achieving wideband capability. Furthermore, the temporal processing of the data snapshots drastically reduces the number of snapshots required for wideband DOA estimation. The effectiveness of the proposed formulation is studied with simulated experiments.