Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment

The corrosion behavior of 2A02 Al alloy under simulated marine atmospheric environment has been studied using mass-gain, scanning electron microscope/energy dispersive spectroscopy (SEM/EDS), laser scanning confocal microscopy, X-ray diffraction spectroscopy and localized electrochemical methods. The results demonstrate that the relationship between the corrosion induced mass-gain and the corrosion time is in accordance with the power rule. The mass-gain increases gradually during the corrosion time, while the corrosion rate decreases. With ongoing of the corrosion, corrosion products film changed from a porous to a compact structure. The various spectroscopic data show that the corrosion products films composed mainly of Al(OH)₃, Al₂O₃ and AlCl₃. The electrochemical corrosion behavior of the 2A02 Al alloy was studied by electrochemical impedance spectroscopy (EIS).     

Strain rate sensitivity of the commercial aluminum alloy AA5182-O

The mechanical behavior of the commercial aluminum alloy AA5182-O is investigated at temperatures ranging from −120 to 150 °C and strain rates from 10⁻⁶ to 10⁻¹ s⁻¹. The strain rate sensitivity parameter is determined as a function of temperature and plastic strain, and the strain rate and temperature range in which dynamic strain aging leads to negative strain rate sensitivity is mapped. The effect of dynamic strain aging on ductility and strain hardening is investigated. The sensitivity of the measured quantities to the experimental method employed and their dependence on grain shape are discussed. The experimental data are compared with the predictions of a model constructed based on a recently proposed mechanism for dynamic strain ageing. The mechanism is based on the effect solute clustering at forest dislocations has on the strength of dislocation junctions. The model is shown to reproduce qualitatively the experimental trends.     

添加Al2O3和SiO2的大晶粒UO2芯块制备研究

研究了Al2O3和SiO2添加剂对UO2芯块晶粒尺寸的影响.结果表明:加入少量的Al2O3和SiO2,可有效促进烧结过程中UO2芯块的晶粒度长大,过量加入则会阻碍烧结过程中UO2芯块的致密化;在添加量一定的情况下,添加不同比例的Al2O3和SiO2,对芯块晶粒尺寸有较大影响,只添加SiO2,对芯块晶粒尺寸影响不大,Al2O3添加量增加,芯块晶粒尺寸随之增加;添加Al2O3和SiO2促进UO2芯块晶粒长大的机制是在烧结期间发生了液相烧结.     

The effect of precipitation of Mg2Al3 and of MnAl6 on texture evolution during isothermal annealing and subsequently on formability of CC AA5182 Al alloy

Continuous cast (CC) AA5182 Al alloy with the precipitation of Mg₂Al₃ and of MnAl₆ was cold rolled to 70% reduction and then isothermally annealed in a salt bath at three temperatures (316, 343, and 371 °C) for different times. Texture evolution during recrystallization was investigated. It was found that the recrystallization textures of the material with intense Mg₂Al₃ precipitation along the grain boundaries exhibited weaker Cube, Goss and R/β fiber components than those of the material with the more uniform fine MnAl₆ precipitates. The opposite was true in the cold rolled condition, i.e. the material with MnAl₆ precipitation had weaker Cube, Goss, and R/β fiber components in the cold rolled condition than the material with intense Mg₂Al₃ precipitation. Thus, recrystallization textures of material with Mg₂Al₃ precipitation were weaker than material with MnAl₆ precipitation. This is due to the fact that large Mg₂Al₃ particles favor the nucleation of randomly oriented grains. When subjected to formability tests, the material with prior Mg₂Al₃ precipitation displayed a lower anisotropy in tensile yield strength, ultimate tensile strength, elongation, and strain hardening exponent than material with prior MnAl₆ precipitation. This is in accord with the texture results which indicated that the recrystallization textures of material with an initial Mg₂Al₃ precipitation were closer to those of a perfectly random sample than those of material with an initial MnAl₆ precipitation. On the other hand, the elongation and Olsen values were lower and the surface quality after bending tests was worse for material with Mg₂Al₃ precipitation. This is due to the non-uniform distribution of Mg₂Al₃ particles which precipitated primarily along the grain boundaries and caused an earlier formation and coalescence of the microvoids around the grain boundary precipitates. The forming limit diagrams (FLD) correlated well with the tensile, Olsen and bending results.     

Structure factors of modified liquid Al–Si alloys

The structure factor and the coordination numbers of liquid Al–Si alloys with different Si content have been measured by a high temperature X-ray diffractometer. Radial distribution functions (RDFs), the nearest atomic distance and the coordination numbers of eutectic Al–Si alloys before and after being modified with Sr and Sb were studied. The RDFs of the liquid alloy were decomposed by five Gaussian peaks. The results show that a Si–Si covalent bond exists in the liquid of eutectic and hyper-eutectic alloys. Sr in the liquid Al–Si has a capability to weaken the covalent bonds of Si–Si, suppressing the nucleation of the eutectic silicon phase. On the other hand, Sb in the liquid Al–Si increases the order degree of Si atoms, decreasing the supercooling degree of the nucleation and promoting the nucleation of eutectic silicon.     

Al4B2O9纳米棒改性制备优异综合性能的固体聚合物电解质

随着储能设备和电力驱动产品的激增,特别是电动汽车的大规模推广应用,全固态电池被认为是最有可能解决电动设备日益严峻的安全问题和高能量密度需求的策略之一.本文报道了一种Al4B2O9纳米棒改性的聚环氧乙烷(PEO)基固体聚合物电解质(ASPE),其具有高离子电导率、宽电化学窗口、良好的机械性能和阻燃性能.具体来说,因为Al...     

反应物量对纳米晶Fe_3Al组织和性能的影响

利用铝热反应熔化方法分别在反应物量为50、100、200g的条件下制备了块体纳米晶Fe3Al材料,通过TEM和XRD研究了材料的晶粒尺寸,并研究了材料室温压缩性能和硬度。结果表明,所制备的材料主要由非晶和纳米晶组织组成,当反应物量增大,部分区域甚至出现微米晶组织。反应物量为50g时Fe3Al材料中非晶较多,不存在微米晶;反应物量为100g时主要以纳米晶为主,非晶数量减少,伴随有少量的微米晶出现;反应物量为200g时,材料以纳米晶为主,微米晶数量较100g时有所增加。随着反应物量的增加,纳米晶相的平均晶粒尺寸增加,屈服强度和硬度呈先增大后减小的趋势。     

广西三水铝土矿矿床地质特征及成因探讨

文章从成矿地质条件,成矿物质来源等方面探讨广西三水铝土矿成因。认为广西三水铝土矿是在碳酸盐岩遭受长期强烈化学风化后形成大量的三水铝矿石和铝质铁、锰质矿石等,并在有利的红土化地形地貌富集形成矿体和矿床。