非衍射波X-wave的仿真

X-wave是一种超声脉冲非衍射波,它在传播过程中保持一定能量分布局域性而不发散,具有良好的非衍射性,因此可以用于雷达和通信、医用成像和组织识别.为了探讨X-wave波物理实现的有效途径,该文对非衍射X-wave进行了仿真,提出了用环行超声传感器发射声场,采用瑞利--索末菲时域衍射公式计算声场,并讨论了结果.该文对X-wave波的物理实现具有一定的指导意义.     

Hot-compression behavior of Al-1Mn-1Mg alloy

The hot-compression of Al-1Mn-1Mg (mass fraction, %) alloy sample was carried out on a Gleeble-1500 thermo-simulator at deformation temperatures from 320 to 400 ℃ and strain rates from 0.1 to 10 s-1 by total strain of 1.4. Microstructure and texture evolution of the hot-compressed alloy were investigated by optical microscopy and X-ray diffraction analysis, respectively. The results show that the relationship among flow stress σ, deformation temperature T and strain rate ε can be expressed in the form of βσ...     

Carbon spheres prepared via solvent-thermal reaction method and their microstructures after high temperature treatment

Carbon spheres with size of 50–300 nm were synthesized via a solvent-thermal reaction with calcium carbide and chloroform as reactants in a sealed autoclave. The morphologies and microstructures of carbon spheres before and after high temperature treatment (HTT) were characterized by X-ray diffractometry (XRD), scanning electronic microscopy (SEM), energy diffraction spectroscopy (EDS), and transmission electron microscopy (TEM). The formation mechanism of carbon spheres was discussed. The results indicate that the carbon spheres convert to hollow polyhedron through HTT. Carbon spheres are composed of entangled and curve graphitic layers with short range order similar to cotton structure, and carbon polyhedron with dimension of 50–250 nm and shell thickness of 15–30 nm. The change of solid spheres to hollow polyhedron with branches gives a new evidence for formation mechanism of hollow carbon spheres.     

Precipitation and stability of reversed austenite in 9Ni steel

A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorded. Then, the precipitation of reversed austenite which led to the length reduction was shown by thermal expansion curves. The results show that the effects of process parameters on the precipitation of reversed austenite can be determined more accurately by this method than by X-ray diffraction...     

Additive-aided electrochemical deposition of bismuth telluride in a basic electrolyte

A new basic electrolyte with two cationic plating additives,polydiaminourea and polyaminosulfone,was investigated for the electrochemical deposition of the bismuth telluride film on a nickel-plated copper foil.Tellurium starts to deposit at a higher potential(-0.35 V) than bismuth(-0.5 V) in this electrolyte.The tellurium-to-bismuth ratio increases while the deposition potential declines from-1 to-1.25 V, indicating a kinetically quicker bismuth deposition at higher potentials.The as-deposited film featu...     

闪锌矿BxAl1-xAs合金的LP-MOCVD生长研究

利用低压金属有机化学气相沉积(LP-MOCVD)生长工艺,采用三乙基硼(TEB)源,在GaAs(001)衬底上生长了B并入比为0.4%～4.4%的一系列BxAl1-xAs合金。实验结果表明,BxAl1-xAs的最优生长温度为580℃;当生长温度为550℃和610℃时,BxAl1-xAs中B并入比都会下降,550℃时B并入比下降更为显著。在580℃最优生长温度下,B并入比随着TEB摩尔流量增加而提高,且B并入比从临界值2.1%增加至最大值4.4%时,DCXRDω-2θ扫描BxAl1-xAs衍射峰的半高宽值从51.8 arcsec升高到204.7 arcsec,原子力显微镜(AFM)测试表面粗糙度从2.469 nm增大到29.086 nm,说明B并入比超过临界值后BxAl1-xAs晶体质量已经逐渐严重恶化。     

光栅光调制器周期结构的优化分析与实验

针对光栅光调制器的光学调制特点,建立一种可变周期结构的光栅光调制器模型,采用Matlab软件中的数字图像处理方法进行研究。利用傅里叶变换分析两种周期结构的光栅光调制器在频谱面和像面的光场分布,并得到不同周期结构对器件调制对比度的影响。实验得到了两种结构像面的光强输出对比。结果表明:不同周期结构对器件的亮态调制效果影响不大;当器件上下反射面中心对齐,下层反射面在器件周期方向两侧各超出上层光栅面的1/2倍光栅间隙宽度时,器件具有最佳的暗态调制效果,从而得到了光栅光调制器的一种周期结构优化方案。     

Effect of Ca~(2+) on CO_2 corrosion properties of X65 pipeline steel

The effect of Ca~(2+) on CO_2 corrosion to X65 pipeline steel was investigated in the simulated stratum water of an oil field containing different concentrations of Ca~(2+). It is found that Ca~(2+) can enhance the corrosion rate,especially in the Ca~(2+) concentration from 256 to 512 mg/L,which can be attributed to the growing grain size and loosing structure of corrosion scales with increasing Ca~(2+) concentration. X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) investigations reveal that a complex carbonate (Fe, Ca)CO_3 forms at high Ca~(2+) concentration due to the gradual replacement of Fe~(2+) in FeCO_3 by Ca~(2+).     

Electroless nickel plating on the surface of carbon fibers

The electroless nickel plating on the surface of carbon fibers was prepared by pretreating the carbon fibers in order to increase their conductivity,and consequently enhance the EMI shielding effectiveness of the composites.The relationship between the performance of depositing coat and pH value,temperature,reaction time and the way of agitation was studied.Results show that the depositing quality is stable under pH between 4.5 and 5.0,temperature between 75 ℃ and 85 ℃,reaction time for 10 min and air agitation.The uniform and compact nickel layer deposited on carbon fibers was proved by XRD and SEM,and the electrical resistivity of carbon fibers with nickel coating was tested.Results indicate that the electrical resistivity of carbon fibers with electroless nickel plating is decreased by an order of magnitude compared with that of carbon fibers.It means that nickel coating can greatly improve the electromagnetic interference shielding properties of carbon fibers.     

Surface wear resistance properties of Ta＋N implanted W18Cr4V high speed steel

High-speed steel W18Cr4V is commonly used in industries such as blade and mould manufacturers because of its high level of hardness and toughness, red-hardness and resistance. Ion implantation is an effective method to improve the wear resis-tance of W18Cr4V. In our investigation, Ta and Ta+N ion implantation was performed on W18Cr4V high-speed steel. The surface properties after implantation were evaluated by measuring friction coefficients while the carbonyl phase of the surface was ana-lyzed by X-ray diffraction analysis. It was found that the friction coefficients of the treated samples were much lower. Samples implanted with Ta+N had a lower friction coefficients than samples implanted only with Ta. This can be attributed to the formation of a new chemical compound, Fe7Ta3, on both surfaces. An even harder chemical compound, Fe2N, was formed on both sttrfaces of Ta+N implanted samples.