光互连技术的研究现状及发展

本文首先总结了光学互连的主要实现途径，然后评述了光互连的研究现状与最新发展，通过对存在的问题分析，最后给出了有关的结论。     

具有透明波导的量子阱半导体激光器及其光集成技术

本文论述了具有透明波导结构的量子阱半导体激光器及其光集成技术的其本原理及主要优点。尤其在实现高功率窄光束输出的光集成器件方面更显出其独特的优点。     

离子交换铒掺杂磷酸盐玻璃波导特性研究

给出有关离子交换铒掺杂磷酸盐玻璃波导的制备以及发光特性的基本结果。用Ag+ Na+ 离子交换在含有适量氧化钠的铒掺杂磷酸盐玻璃上很容易实现低损耗平面波导 ,并且离子交换过程对这种玻璃的光谱特性没有影响。     

分析矩形光波导损耗的简易方法

利用有效折射率和修正的有效折射率方法对矩形光波导的损耗作了简单有效的分析，并且计算出了纵向传播系数和衰减系数的大小。     

手机上的MP4：波导D600手机

波导自从与萨基姆（SAGEM）合作以来，数款经典手机接踵而来，DOEASY X-8精致的显示屏和强大的拍照能力给我们留下深刻的印象最新推出的D600延续了我们的看法。     

每周送轿车还有现金拿——FLY创意创富大赛即将引爆

7月30日，由腾讯网和波导飞系列手机共同打造的FLY创意创富大赛在飞空间（http：／／fly.qq.com）正式启动，以每周送出一辆轿车、两款波导飞系列最新款手机和每周万元创意奖金的诚意，全力支持年轻人创意创富!     

厚积薄发 20款新品闪耀波导

进入2005年，手机产业的发展日新月异，新技术、新应用层出不穷。各路厂商为了在市场上抢得先机，纷纷推出让人眼花缭乱的新产品。6月7日，国产手机领军品牌波导发动了夏季的新一轮攻势。一举推出了20款新品。其中不乏亮点之作。     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

Analysis and Simulation of S-shaped Waveguide in Silicon-on-insulator

The simulation and analysis of S-shaped waveguide bend are presented.Bend radius larger than 30 mm assures less than 0.5 dB radiation loss for a 4-μm-wide silicon-on-insulator waveguide bend with 2-μm etch depth.Intersection angle greater than 20° provides negligible crosstalk (<-30 dB) and very low insertion loss.Any reduction in bend radius and intersection angle is at the cost of the degradation of characteristics of bent waveguide and intersecting waveguide, respectively.