Concast连铸机自控系统简介

天津钢铁有限公司引进了瑞士Concast公司6机6流方、圆坯连铸机及相关技术，文章简要介绍了Concast连铸机的自动控制系统的特点和功能。     

Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

小纸层析法快速测定^99mTc—HMPAO放射化学纯度

采用小纸层析系统１：１的氯仿／四氢呋喃展开剂分析＾９９ｍＴｃ－ＨＭＰＡＯ的放射化学纯度，并与两个薄层析系统和一个纸层析系统的方法作比较。配对ｔ检验结果表明两种方法测定的放射化学纯度无显著差异；放射化学纯度在７４．２％－９６．４％，小纸层析法与薄层／纸层析法紧密相关，回归公式ｙ＝１．００６ｘ－０．３２３。     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

An energy dispersive micro X-ray diffractometer based on a combined system of polycapillary optics

An energy dispersive micro X-ray diffractometer based on a combined system of two polycapillary X-ray lenses is designed. The polycapillary X-ray lens in the excitation channel is either a polycapillary parallel X-ray lens (PPXRL) or a slightly focusing polycapillary X-ray lens (SFPXRL). The polycapillary X-ray lens in the detection channel is a PPXRL. At 6.4 keV and 2θ = 141.5°, the total resolution of the diffractometer based on a SFPXRL in the excitation channel and a PPXRL in the detection channel in Δd/d is 4.8%.     

The distribution of anthocyanins in grape skin extracts of port wine cultivars as determined by high performance liquid chromatography

The distribution of anthocyanins in methanolic skin extracts of 16 grape cultivars used for port wine production and grown at five sites in the Douro Valley in Northern Portugal has been assessed by high performance liquid chromatography. Results are confined to the seven most readily separated and identified anthocyanins and are expressed as percentages of their total (88–99% of the total integrated area). Anthocyanins based on malvidin (Mv) predominated. Of these, Mv 3-glucoside was the major pigment (33–60%), being exceeded by Mv 3-p-coumarylglucoside (2–51%) in only two cultivars; Mv 3-acetylglucoside (1–15%) was consistently the lowest. Peonidin 3-glucoside (1–27%) was prominent in four cultivars, but delphinidin 3-glucoside (1–11%), petunidin 3-glucoside (2–11%) and cyanidin 3-glucoside (trace-6%) were of low proportions throughout. The ratio Mv 3-acetylglucoside/total Mv glucosides appeared characteristic of cultivar, independent of site, and a useful aid to identification of grape cultivars. The coloured pulp of some cultivars contained peonidin 3-glucoside as a major component, present in greater proportions than in the skin; the percentage of Mv 3-p-coumarylglucoside was lower in pulp than in skin. The identities of six of the seven anthocyanins were confirmed by fast atom bombardment mass spectrometry and the structures of the Mv derivatives were determined by nuclear magnetic resonance. The formation of formyl and acetyl anthocyanin artefacts is described.     

SVPWM三相电压型逆变器的仿真研究

以三相电压型逆变器为基础,根据空间矢量脉宽调制（SVPWM）基本原理详细分析研究了电压矢量作用时间和扇区分配问题,以α-β坐标为基础,建立了互差π/3的x-y-z时间坐标系,提出了不同扇区矢量作用时间长短根据期望极值判断的原则。介绍了MATLAB中M文件编程的仿真方法,建立了MATLAB程序嵌入式主要功能模块,逆变器采用数字PID控制,利用Simulink对系统进行了综合仿真分析及试验,给出了仿真及实验波形,为实现SVPWM逆变器的数字控制提供参考。     

嵌入式三轴运动控制系统的以太网通信实现

研究了嵌入式三轴运动控制系统的以太网通信问题;采用LM3S9B92微控制器设计主控制器和各轴电动机控制器,通过移植实时操作系统μC/OS-Ⅱ和TCP/IP协议栈LwIP,实现主控制器与各轴电机控制器之间的信息交互;按电动机控制数据传输紧急程度要求不同,在以太网MAC层之上建立调度表,优先传输紧急数据,提高三轴运动控制系统实时性;实验结果表明嵌入式三轴运动控制系统实现了以太网数据的无差错传输,并且在重载情况下时间延迟大约为系统改进前的72%,改进了系统的实时性。     

在CodeWarrior编译环境下运行μC／OS—Ⅲ

μC／OS-Ⅱ是面向8／16位及低端32位单片机应用的RTOS,而新近推出的μC／OS-Ⅲ则面向高性能32位单片机,如ARMCortex等。以Cortex—M4为内核的Kinetis系列单片机,不仅用于全国大学生飞思卡尔杯智能车竞赛,也用于诸多大学的嵌入式系统教学,官方提供的开发环境是CodeWarrior。本文介绍如何利用CodeWarrior开发环境,将μC／OS-Ⅲ在Kinetis单片机上运行起来,以便将μC／OS-Ⅲ引入教学、科研与应用。     

μC／OS—Ⅲ在Cortex—M3处理器上的移植

为了将μC／OS-Ⅲ移植到Cortex—M3处理器上,选用RealView MDK作为软件开发平台,针对Cortex—M3处理器特性编写了移植所需的C语言和汇编语言源代码,并验证了移植的正确性。移植后的μC／OS-Ⅲ能够稳定运行于Cortex～M3处理器上。该移植对大部分Cortex—M3处理器具有通用性,对其他架构处理器的μC／OS-Ⅲ移植具有参考作用。