Influence of refiner fibre quality and fibre modification treatments on properties of injection-moulded beech wood–plastic composites

Thermo-mechanical pulp (TMP) fibres made from beech wood were produced using increasing refiner gap widths and thus with increasing fibre length and coarseness. Fibres (60% by weight) were compounded in an internal kneading mixer using high-density polyethylene as the matrix and injection-moulded. Fibre lengths and length/width ratios were determined (a) before processing and (b) after injection-moulding and Soxhlet extraction using the optical FibreShape system. An increase in fibre length resulted in a decrease in water absorption and an improvement in flexural strength and modulus of elasticity of the wood–plastic composites (WPC). However, flexural strength of the WPC with TMP fibres was not improved compared to WPC with wood flour when maleic anhydride-grafted polyethylene (MAPE) was used as a coupling agent. After injection-moulding, differences in length of the various TMP fibre types were minor. Fibre geometry before processing strongly influences the water absorption and flexural properties of the composite. Fibre treatment with emulsified methylene diphenyl diisocyanate (EMDI) resin before compounding was shown to be equally efficient in reducing water absorption and improving flexural strength as the addition of MAPE during the compounding step.     

Doping sp-hybridized B atoms in graphyne supported single cobalt atoms for hydrogen evolution electrocatalysis

Electrochemical water splitting to hydrogen is considered as a promising approach for clean H₂ production. However, developing highly active and inexpensive electrocatalysts is an important part of the hydrogen evolution reaction (HER). Herein, we present a multifaceted atom (sp²-and sp-hybridized boron) doping strategy to directly fine-modify the electronic structures of the active site and the HER performance by the density functional theory calculations. It is found that the binding strength between the Co atom and the B doped graphyne nanosheets can be enhanced by doping B atoms. Meanwhile, the Co@B₁-GY and Co@B₂-GY catalysts exhibit good thermodynamic stability and high HER catalytic activity. Interestingly, the Co@B₂-GY catalyst has an ideal HER performance with the ΔG_H* value of −0.004 eV. Moreover, the d-band center of the Co atoms is upshifted by the sp²-or sp-hybridized B dopants. The concentrations of the sp-hybridized B atoms have a positive effect on the electrons transformation of the Co atoms. The interaction between the H and Co atoms becomes strong with the increase of the concentrations of the sp-hybridized B atoms and thus the corresponding catalysts show sluggish HER kinetics. This investigation could provide useful guidance for the experimental groups to directly and continuously control the catalytic activity towards HER by precisely doping multifaceted atoms.     

食物致敏原表位定位技术的研究进展

食物致敏原是引起食物过敏的元凶，多为蛋白质。抗原表位是在抗原分子中与抗体反应或被抗原受体识别，并引发机体免疫应答的特殊化学基团。从表位水平认识食物致敏原，能揭示食物过敏的物质基础，为解决食物过敏问题提供精准的靶标。本文基于表位结构和定位方法的不同，介绍了食物致敏原表位定位技术的发展，并进一步展望了致敏原表位信息对于改进食物过敏鉴定技术和低致敏食物加工方法的应用前景。     

Study on the dissolved oxygen control strategy in large‐scale vitamin B12 fermentation by Pseudomonas denitrificans

BACKGROUND: There are two different routes for vitamin B₁₂ biosynthesis, which results in discrepancies and uncertainties of the dissolved oxygen (DO) concentration for vitamin B₁₂ fermentation. In this paper, the DO control strategy was explored for industrial vitamin B₁₂ fermentation by Pesudomonas denitrificans in 120000‐L fermenter. RESULTS: A DO‐stat strategy was first successfully scaled up from a 9000 L fermenter to a 120 000 L fermenter. Then a multi‐stage DO control strategy was further established in the 120 000 L fermenter, in which the DO level was shifted from 8–10% (20–48 h) to 2–5% (49–106 h) and below 2% (107–168 h) by gradually reducing the rate of aeration and agitation. As a result, 198.80 mg L^?1 of vitamin B₁₂ was obtained, which was significantly higher than those obtained under the fermentations with one‐stage DO control. CONCLUSIONS: The comparatively low DO level was favorable for vitamin B₁₂ biosynthesis, but it would have an extremely negative effect on cell growth. Compared with the low DO level maintained at all times of the fermentation process, a multi‐stage DO control strategy could not only increase the biomass but also improve vitamin B₁₂ biosynthesis. Copyright © 2012 Society of Chemical Industry     

Fabrication of corrosion resistant, bioactive and antibacterial silver substituted hydroxyapatite/titania composite coating on Cp Ti

The present work is aimed at developing a bioactive, corrosion resistant and anti bacterial nanostructured silver substituted hydroxyapatite/titania (AgHA/TiO₂) composite coating in a single step on commercially pure titanium (Cp Ti) by plasma electrolytic processing (PEP) technique. For this purpose 2.5 wt% silver substituted hydroxyapatite (AgHA) nanoparticles were prepared by microwave processing technique and were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM) methods. The as-synthesized AgHA particles with particle length ranging from 60 to 70 nm and width ranging from 15 to 20 nm were used for the subsequent development of coating on Cp Ti. The PEP treated Cp Ti showed both titania and AgHA in its coating and exhibited an improved corrosion resistance in 7.4 pH simulated body fluid (SBF) and 4.5 pH osteoclast bioresorbable conditions compared to untreated Cp Ti. The in vitro bioactivity test conducted under Kokubo SBF conditions indicated an enhanced apatite forming ability of PEP treated Cp Ti surface compared to that of the untreated Cp Ti. The Kirby-Bauer disc diffusion method or antibiotic sensitivity test conducted with the test organisms of Escherichia coli (E. coli) for 24 h showed a significant zone of inhibition for PEP treated Cp Ti compared to untreated Cp Ti.     

ROS-Mediated Anti-Tumor Effect of Coptidis Rhizoma against Human Hepatocellular Carcinoma Hep3B Cells and Xenografts

Coptidis Rhizoma is the dried rhizome from the Coptis chinensis Franch. that has been shown to have a number of beneficial pharmacological properties including antioxidant, anti-inflammatory, and anti-cancer effects. However, the anti-cancer effects of Coptidis Rhizoma on hepatocellular carcinoma (HCC) remain unclear. In this study, we investigated the anti-cancer properties of Coptidis Rhizoma ethanol extract (CR) in HCC Hep3B cells and in a xenograft mouse model. Our results showed that the CR significantly inhibited cell growth and induced apoptosis in Hep3B cells through increased expression of Bcl-2 associated x-protein (Bax) and cleavage of poly-ADP ribose polymerase (PARP), reduced expression of Bcl-2, and activated caspases. CR also increased the generation of intracellular reactive oxygen species (ROS), which caused a loss of mitochondrial membrane potential (MMP, ΔΨm) and activation of the mitochondria-mediated intrinsic apoptosis pathway. Moreover, N-acetylcysteine (NAC), a ROS inhibitor, markedly blocked the effects of CR on apoptotic pathways. CR also induced the expression of light chain 3 (LC3)-I/II, a key autophagy regulator, whereas CR-mediated autophagy was significantly suppressed by NAC. In addition, pre-treatment with NAC perfectly attenuated the inhibition of cell invasion and migration of CR-stimulated Hep3B cells. Furthermore, oral administration of CR suppressed Hep3B tumor growth in xenograft mice without toxicity, alterations to body weight, or changes in hematological and biochemical profiles. Taken together, our findings suggest that CR has anti-tumor effects that result from ROS generation, and may be a potential pharmacological intervention for HCC.     

Fatigue behaviour assessment of flax–epoxy composites

The present study focuses on the characterisation and evaluation of the fatigue behaviour of flax–epoxy composites. A better understanding of this behaviour allows the prediction of long-term properties to assess the viability and long-term durability of these materials. The purpose of this work is to systematically compare the tension–tension fatigue behaviour of flax fibre composites for one random mat, six textile architectures and two laminate configurations, which are used in a wide range of applications. The fibre architecture was found to have a strong effect on the fatigue behaviour, where higher static strength and modulus combinations present the best fatigue characteristics. They have a delayed damage initiation and increased fatigue life as well as a reduced damage propagation rate combined with higher energy dissipation in the early stages of fatigue loading.     

Semi-rigid biopolyurethane foams based on palm-oil polyol and reinforced with cellulose nanocrystals

In this study, water-blown biopolyurethane (BPU) foams based on palm oil were developed and cellulose nanocrystals (CNC) were incorporated to improve the mechanical properties of the foams. In addition, the foams were compared with petroleum polyurethane (PPU) foam. The foam properties and cellular morphology were characterized. The obtained results revealed that a low-density, semi-rigid BPU foam was prepared using a new formulation. CNC as an additive significantly improved the compressive strength from 54 to 117 kPa. Additionally, cyclic compression tests indicated that the addition of CNC increased the rigidity, leading to decreased deformation resilience. The dimensional stability of BPU foams was increased with increasing CNC concentration for both heating and freezing conditions.Therefore, the developed BPU nanocomposite foams are expected to have great potential as core material in composite sandwich panels as well as in other construction materials.     

In situ assessment of carbon nanotube flow and filtration monitoring through glass fabric using electrical resistance measurement

Filtration of nanofillers into porous fabric media is still an issue during the preparation of advanced fiber-reinforced composites. The assessment of resin/multiwall carbon nanotube (MWCNT) flow, MWCNT filtration, and the cure monitoring of glass fiber/carbon nanotube-polyester composites by means of the measurement of the electrical resistance was introduced. The vacuum-assisted resin transfer molding technique was used. The electrical resistances measured over the span of a composite were qualitatively correlated with MWCNT flow and the degree of MWCNT filtration. It was found that while the complexity of the fabrics could likely introduce preferential deposition of MWCNTs, their filtration is mainly affected by their dispersion state in the resin suspension. Relationships among critical parameters such as the lengths and diameters of MWCNTs, the inter- and intra-tow dimensions of glass fabrics, the dispersion level of MWCNTs, and the viscosity of nanocomposite samples are discussed and correlated to the filtration, cure, and flow phenomena. We showed that our method can also serve as an early warning to obviate defects in the resulting composite.