大孔距小排距的孔网参数在中深孔爆破中的应用

天铁集团的石矿厂多年来爆破效果不理想，粉矿率高，通过对爆破孔网参数的优化，采用大孔距、小排距的孔网参数在中深孔爆破中取得了较好的效果。     

9200kW同步电动机全压异步启动及其励磁装置

从结构性能、直接启动、励磁装置等方面全面介绍了大型同步电动机全压异步启动的方法。     

国有股减持、政府隐性担保与投资者行为

国有股减持导致股票市场的大幅下跌，其咎不在以市场价减持国有股的减持方案．政府对股票市场的隐性担保造成投资者对市场走势的某种“理性的”稳定预期和信念．在此基础之上，政府和投资者塑造各自的心理和行为模式、国有股减持的信号含义就是政府要解除对市场的隐性担保．这个信号引发投资者固有的预期模式和行为模式的转变以及股票市场的信心危机。进而导致股票市场的“非理性反应”—市场以大幅下跌拒绝政府国有股减持和解除担保关系的行为、政府被迫停止国有股减持行为，但停止国有股减持并没有阻止股市的持续下跌，因为减持虽然停止，自减持发出的解除隐性担保的信号仍然有效。     

PIC单片机在中央空调控制器中的应用

基于PIC 16F877/16C74单片机，设计了一种能满足用户尺寸要求的中央空调控制器。     

秦山核电厂气载放射性释放的环境影响

本文评价了秦山核电厂气载放射性流出物对环境的影响。应用现场及风洞大气扩释实验结果和厂址周围的人口与食谱调查资料,估算了秦山核电厂在正常运行和事故条件下释放的气载放射性流出物对公众产生的个人有效剂量当量和集体有效剂量当量。计算结果表明,正常运行时厂址边界(0.5km)处的最大个人有效剂量当量为2.7×10~(-2)mSv/a,该剂量的大部分来自~(137)Cs 的食入(主要由地表湿沉积引起);80km 范围内的集体有效剂量当量为1.1人·Sv/a,归一化集体有效剂量当量为3.7人·Sv/GW(e)·a。文中还给出了事故情况下剂量估算结果。     

转炉负能炼钢攻关对策

通过介绍转炉炼钢工艺流程及工序能耗分析，为提高转炉煤气回收量及降低电耗采取了一系列攻关措施，实现了转炉负能炼钢，取得了一定经济效益。     

FHCF: A Simple and Efficient Scheduling Scheme for IEEE 802.11e Wireless LAN

The IEEE 802.11e medium access control (MAC) layer protocol is an emerging standard to support quality of service (QoS) in 802.11 wireless networks. Some recent work shows that the 802.11e hybrid coordination function (HCF) can improve significantly the QoS support in 802.11 networks. A simple HCF referenced scheduler has been proposed in the 802.11e which takes into account the QoS requirements of flows and allocates time to stations on the basis of the mean sending rate. As we show in this paper, this HCF referenced scheduling algorithm is only efficient and works well for flows with strict constant bit rate (CBR) characteristics. However, a lot of real-time applications, such as videoconferencing, have some variations in their packet sizes, sending rates or even have variable bit rate (VBR) characteristics. In this paper we propose FHCF, a simple and efficient scheduling algorithm for 802.11e that aims to be fair for both CBR and VBR flows. FHCF uses queue length estimations to tune its time allocation to mobile stations. We present analytical model evaluations and a set of simulations results, and provide performance comparisons with the 802.11e HCF referenced scheduler. Our performance study indicates that FHCF provides good fairness while supporting bandwidth and delay requirements for a large range of network loads. Pierre Ansel received a multidisciplinary in-depth scientific training in different fields such as Pure and Applied Mathematics, Physics, Mechanics, Computer Science and Economics from the Ecole Polytechnique, Palaiseau, France. Then, he joined the Ecole Nationale Superieure des Telecommunications, Paris, France in 2005 where he went further into electronics, databases, computer network security and high speed networks. He received a multidisciplinary master of sciences degree and an additional master of sciences degree in telecommunications in 2005. He did a summer internship in 2003 in INRIA, Sophia Antipolis, France where he worked on the Quality of Service in 802.11 networks at Planete Group, France. Then in 2004, he joined France Telecom R&D, Issy-les-Moulineaux, France to work on Intranet Security issues. He designed a WiFi security supervision architecture based on WiFi Intrusion Detection Sensors. He is currently a French civil servant and belongs to the French Telecommunications Corps. Qiang Ni received the B.Eng., M.Sc. and Ph.D. degrees from Hua Zhong University of Science and Technology (HUST), Wuhan City, China in 1993, 1996 and 1999 respectively. He is currently a faculty member in the Electronic and Computer Engineering Division,School of Engineering and Design, Brunel University, West London, U.K. Between 2004 and 2005 he was a Senior Researcher at the Hamilton Institute, National University of Ireland, Maynooth. From 1999 to 2001, he was a post-doctoral research fellow in the multimedia and wireless communication laboratory, HUST, China. He visited and conducted research at the wireless and networking group of Microsoft Research Asia Lab during the year of 2000. From Sept. 2001 until may 2004, he was a research staff member at the Planète group of INRIA Sophia Antipolis France. Since 2002, he has been active as a voting member at the IEEE 802.11 wireless LAN standard working group. His current research interests include communication protocol design and performance analysis for wireless networks, cross-layer optimizations, vertical handover and mobility management in mobile wireless networks, and adaptive multimedia transmission over hybrid wired/wireless networks. He has authored /co-authored over 40 international journal/conference papers, book chapters, and standard drafts in this field. He is a member of IEEE. E-mail: Qiang.Ni@ieee.org Thierry Turletti received the M.S. (1990) and the Ph.D. (1995) degrees in computer science both from the University of Nice – Sophia Antipolis, France. He has done his PhD studies in the RODEO group at INRIA Sophia Antipolis. During the year 1995–96, he was a postdoctoral fellow in the Telemedia, Networks and Systems group at LCS, MIT. He is currently a research scientist at the Planete group at INRIA Sophia Antipolis. His research interests include multimedia applications, congestion control and wireless networking. Dr. Turletti currently serves on the Editorial Board of Wireless Communications and Mobile Computing.     

Modern Teaching and Training in Metallurgical Engineering

This contribution deals with advanced educational technologies needed to equip customers from higher education institutions, research and industry with efficient tools supporting their work and operating new skills‐training methods. The challenges are reducing the training costs, improving quality and increasing the number of graduates in engineering departments. The concept of a Virtual Lab based on the combination of various teaching methods and tools is presented. Principles of mathematisation in metallurgical education and training are discussed. An example of online course designed in the form of Virtual Lab is demonstrated.     

汽车组合仪表板控制系统设计

介绍了以PIC16F873单片机为控制核心的汽车组合仪表板控制系统的设计,简述了汽车组合仪表板的基本构成,介绍了汽车组合仪表板控制系统的组成和各部分功能,给出了数据采集处理电路、电源电路等部分硬件电路设计方案,并阐述了一些软件设计算法,如分段插补法和用于平滑指针的软件设计算法等。     

提高16Mn连铸坯控轧合格率

１６Ｍｎ连涛坯进行控轧时，按铸坯碳当量的上限和下限，分别采用两种不同的控轧制度。在邯钢中板分厂试轧的结果，轧材合格率均达到９６％以上，投产后轧材合格率达到９８％以上。