Determination of polymer–polymer interaction parameters using inverse gas chromatography

A modified method is discussed that is based on Farooque and Deshpande's method to obtain polymer–polymer interaction parameters using inverse gas chromatography (IGC) data. In the Farooque and Deshpande method, the ratio of the difference of probe–polymer interaction parameters between two polymers and the probe volume [(χ₁₂ ? χ₁₃)/V₁] is used as the abscissa. In the modified method, the ratio [(?₂χ₁₂ + ?₃χ₁₃)/V₁] is used as the abscissa. Experimental data previously reported for a poly(?‐caprolactone)‐polyepichlorohydrin (PCL/PECH) blend and a poly(ethyl acrylate)‐poly(vinyl propionate) (PEA/PVPr) blend are analyzed. It is found that the slopes obtained by the new method had smaller deviations from the theoretical values than the Farooque and Deshpande method. The standard deviations of both slopes and intercepts obtained from the new method are also smaller. Using the new method, the polymer–polymer interaction parameters obtained from the intercept are negative numbers for the PCL/PECH system and very small positive numbers for PEA/PVPr. Explanations are given for the probe and concentration dependency of the polymer–polymer interaction parameters that are generally observed in IGC studies. A new method for selecting the best probe for calculating the interaction parameter is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 671–680, 2003     

平面波谱法分析电磁波在管道中的传播

通过分析电磁波从管道开口耦合进入管道的绕射机理及场在腔体内的射线特征，将进入管道的绕射场展开为平面波谱，利用平面波在自由空间的传播特性分析了电磁波沿管道的传输和反射特征。通过算例验证了该算法的有效性。     

光学薄膜在光通信中的应用

主要介绍了光学薄膜在光通信的无源型器件中的原理及应用,并与光纤光栅和平面光波导型的无源器件作简单比较。     

Determination of the Coordinates of the Center of a Gaussian Beam by Means of a Matrix Photodetector Using a Weighting Method

A weighting algorithm to determine the coordinates of the center of a Gaussian laser beam projected onto a matrix photodetector is considered. The influence of the internal noise of the photodetector, the maximum brightness of the signal at the beam maximum, and the beam radius on the precision of the algorithm is investigated. Recommendations on image processing are presented.     

基于Gibbs模型的提高图像分辨率方法

在提高图像分辨率过程中,选择合适的成像模型是获得高分辨率图像的一个关键因素。提出一种基于最大后验概率、采用Gibbs成像模型,并利用多帧序列图像重构高分辨率图像的方法,充分利用序列图像之间的累加信息,从而快速地获得较其他方法更优的高分辨率图像。     

Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

国际检验方法对促进产品质量提高的启示

对氨基二苯胺是性能优异的对苯二胺类防老剂的中间体。其质量好坏直接关系到防老剂4020、4010NA、688等品种的质量。对氨基二苯胺质量检验方法的提出则有助于我们开拓思路，更新质量观念，地症下药，分析原因，采取措施，全面提高其内在质量。     

数据的VV&C研究

数据的可信性是建模与仿真领域中一个重要的问题。该文首先介绍了数据校核、验证与证明 (VV&C)的基本概念。然后确定了数据VV&C评估的主要策略 :过程模型以及支持数据质量的元数据模板等几方面内容。接着对数据的VV&C和建模与仿真的VV&A的关系作了简要比较。最后举出了一个综合环境评估和检查工具的例子。     

用环氧厚浆涂料防混凝土碳化

介绍了针对早期建筑的混凝土桥梁碳化情况采用H52-S4环氧厚浆涂料进行封闭保护、防腐处理的施工方法及施工工艺，并提出施工中应注意的有关事项，对温度影响、表面气泡处理进行了讨论，提出合理化建议。     

室温离子注氢CeO2的微结构及价态研究

利用高分辨透射电子显微镜(HRTEM)及电子能量损失谱(EELS)对室温下注入氢离子的CeO2烧结体的显微组织结构和价态进行了原位观察和分析。结果表明：室温注氢，虽可以使严重损伤区内氧的状态发生明显改变，却不能引起CeO2的相转变及Ce的价态改变；这一结果可能与氢离子因尺寸太小不能占据CeO2的正常格点位置从而无法有效形成氧空位以及室温下CeO2中Ce和O的扩散比较困难等因素有关。