Oxidative dehydrogenation of ethane over Co–BaCO3 catalysts using CO2 as oxidant: effects of Co promoter

Co–BaCO₃ catalysts exhibited high catalytic performance for oxidative dehydrogenation of ethane (ODE) using CO₂ as oxidant. The maximal formation rate of C₂H₄ was 0.264 mmol · min⁻¹ · (g · cat.)⁻¹ (48.0% C₂H₆ conversion, 92.2% C₂H₄ selectivity, 44.3% C₂H₄ yield) on 7 wt% Co–BaCO₃ catalyst at 650 °C and 6000 ml. (g · cat.)⁻¹. h⁻¹. Co–BaCO₃ catalysts were comparatively characterized by XRF, N₂ isotherm adsorption-desorption, XRD, H₂-TPR and LRs. It was found that Co⁴⁺–O species were active sites on these catalysts in ODE with CO₂. The redox cycle of Co–O species played an important role on the catalytic performance of Co–BaCO₃ catalysts. On the other hand, the co-operation of BaCO₃ and BaCoO₃ was considered to be one of possible reasons for the high catalytic activity of these catalysts.     

Synthesis, characterization, and catalytic properties of polysiloxanes with pendant 4-(3-pyridinyl)butyl and 4-(1-oxypyridin-3-yl)butyl groups

New silane monomers with the pendant 4-(3-pyridine)butyl group have been synthesized by hydrosilation of 3-(3-butenyl)pyridine with Me _n Si(OEt)_3-n H (n=0, 1) using a platinum catalyst. Only -addition products were observed. The products were characterized by elemental analysis, infrared,¹H- and¹³C-NMR spectroscopy, and gas chromatography-mass spectrometry. Hydrolysis-polycondensation of the difunctional monomer with a basic catalyst, Me₄NOH, gave a mixture of cyclic oligomers, principally cyclic tetramer, and linear homopolymer. Under similar reaction conditions, the trifunctional monomer gave crosslinked material which was soluble in common organic solvents. The linear homopolymer and crosslinked polymer were trimethylsilyl end-blocked with hexamethyldisilazane. The cyclic and end-blocked polymers were characterized by elemental analysis and spectroscopic methods. Molecular weights of the polymers were obtained by end-group analysis using¹H-NMR spectral data, size exclusion chromatography, and direct insertion-probe mass spectrometry. The cyclic, linear, and crosslinked materials were N-oxidized withm-chloroperoxybenzoic acid and characterized by spectroscopic methods. The polymeric N-oxide derivatives were shown to be effective transacylation catalysts in the synthesis of mixed carboxylic acid anhydrides in immiscible solvents (H₂O/CH₂Cl₂) under phase-transfer conditions. The implications of the results on the mechanism of catalysis are discussed.     

Transient and isotopic studies of the oxygen transport and exchange during oxidative coupling of methane on Sr promoted La2O3

Isotopic transient techniques were applied to study oxidative coupling of methane over lanthanum oxide and strontium promoted La₂O₃ catalysts. Results of the¹⁸O₂/¹⁶O₂ isotopic exchange experiments indicate that Sr promotion increases oxygen uptake from the lattice of the catalyst. Oxygen self diffusion coefficients, which were determined for the series of lanthana catalysts, reach a maximum for the 1% Sr/La₂O₃. Steps of¹⁸O₂ in the presence of a steady flow of methane over Sr/La₂O₃ catalysts, indicate that surface and bulk oxygen appear in the reaction products before gas-phase¹⁸O². Steps of CO₂ over catalysts in which lattice oxygen has been exchanged with¹⁸O₂, show that gas/solid exchange involves over 50% of the lattice oxygen. Under reaction conditions, methane pulses with no gas-phase oxygen yield negligible amounts of products which indicates that methane interacts with lattice oxygen only in the presence of the gas-phase oxygen.     

纳米稀土复合固体超强酸催化合成乙酸苄酯

采用共沉淀法制备了纳米稀土复合固体超强酸SO4^2-／ZrO2-2％Nd2O3催化剂，电镜分析表明，催化剂颗粒直径在25nm左右，比表面积测定：71．03m^2／g。酸强度-12．70〈Ho〈-11．99。并对合成乙酸苄酯的最佳反应条件进行了研究。研究表明：当苯甲醇与乙酸的物质的量比为1：2，反应时间为5h，反应温度为120℃，催化剂用量为6％苯甲醇的质量时，酯化率可达92．04％。研究发现，该催化剂可重复使用并可活化再生。     

PP/纳米级CaCO_3复合材料的研究

研究了纳米级CaCO3填充粒状、粉状PP复合材料的力学性能,并用SEM观察纳米级碳酸钙在PP中的分散状态及用SALS分析了其结晶行为。结果表明,粉状PP更有利于纳米级碳酸钙在PP中的分散,并具有更好的加工性能、力学性能。同时纳米级碳酸钙改性PP的SALS图像变得弥散、模糊,PP球晶变得不完善,晶粒更小。     

Monitoring slope deformation using a 3-D laser image scanning system:a case study

An ILRIS-36D 3-D laser image scanning system was used to monitor the Anjialing strip mine slope on Pingshuo in Shanxi province.The basic working principles,performance indexes,features and data collection and processing methods are illustrated.The point cloud results are analyzed in detail.The rescale range analysis method was used to analyze the deformation characteristics of the slope.The results show that the trend of slope displacement is stable and that the degree of landslide danger is low.This work indicates that 3-D laser image scanning can supply multi-parameter,high precision real time data over long distances.These data can be used to study the distortion of the slope quickly and accurately.     

Zn掺杂对GdMnO体系的晶体结构影响

系统研究了Gd（1-x）ZnxMnO3（x=0,0.2,0.4,0.6,0.8,1.0）体系的结构。结果表明,实验样品具有正交对称性结构。当Zn掺杂浓度x≤0.4时,随着Zn掺杂浓度的增加,晶格常数b、c减小,而晶格常数a增大,晶胞体积逐渐减小;当掺杂浓度x≥0.6时,Zn掺杂浓度的增加,晶格常数b、c增大,而晶格常数a减小,晶胞体积逐渐增大。计算表明Gd（1-x）ZnxMnO3系列化合物的容忍因子在0.76~0.92范围,可以形成稳定的钙钛矿结构。     

数控加工三维场景几何建模技术研究

讨论了基于构件技术的数控加工三维场景建模技术,并以OpenGL和Visual C++6.0为开发平台,开发出一个基于STL文件格式的建模系统.     

CuO-NiO/Al_20_2催化剂上N-甲基哌嗪合成研究

以共沉淀法制备铜、铝系复合氧化物作为催化剂,二乙醇胺和甲胺为原料,合成了N-甲基哌嗪.利用高压反应釜对其进行活性评价,发现CuO-NiO/Al2O3活性最高.并对铜、铝、镍摩尔比、沉淀剂种类、沉淀方式,焙烧温度等条件进行了优化.结果表明:催化剂中理想的Cu、Al、Ni摩尔比为1:1:3.2,沉淀剂为氢氧化钠,沉淀方式为并流,焙烧温度为500℃.该条件下N-甲基哌嗪的选择性为27.7%,二乙醇胺的转化率达89.8%.另外通过对使用前后催化剂进行表征分析发现催化剂失活原因为表面高聚物的附着和对孔道的堵塞.