电解电容器铝箔纯交流腐蚀工艺影响因素的研究

对电解电容器铝箔交流腐蚀体系中各影响因素的研究结果表明，在电流密度为０．５Ａ／ｃｍ２，温度为４７±２℃；控制腐蚀液中Ａｌ（３＋）含量及适量添加表面保护剂和辅助添加剂的条件下，可获得最大比电容。通过循环伏安曲线测试，探讨了各因素影响腐蚀的机理及相互关系。     

LiFePO4基正极材料容量的温度敏感特性及交流阻抗谱研究

采用原位碳包覆法制备了锂离子二次电池用LiFePO4／C复合正极材料。考察了环境温度对LiFePO4/C电池容量的影响，得到容量与绝对温度之间符合Arrhenius关系。运用交流阻抗谱分析了温度与电池电化学特性的关系，并对电极基于电荷和质量传递控制过程给出了一种新的模拟等效电路，通过Zview拟合软件得到了各个模拟元件的数值及变化趋势，从而定量地解释LiFePO4／C复合电极容量与温度的关系。     

甲型肝炎病毒(L-A-1株)基因型分析

目的 分析甲肝病毒基因型,为确定我国甲肝的分子流行病学及疫苗的安全性和免疫原性奠定基础。方法 采用抗原捕获聚合酶链反应（AC/PCR）,依据国际上甲肝病毒分型标准,扩增VP1/2A结合处的168个核苦酸（nt2909～3264）。结果 经生物信息学软件分析,得出L-A-1株病毒属于甲肝病毒基因IB亚型。结论 在我国有IA和IB两个亚型甲肝病毒流行。     

交流接触器温度场仿真及试验验证

将ANSYS有限元热分析应用到交流接触器热特性分析中,模仿其实际工作环境,构建交流接触器三维稳态热分析模型,确定热源、导热系数和表面散热系数,对接触器的稳态温度场进行分析;进一步改变施加的边界条件,研究不同散热方式下接触器的温度分布。最后对CJX2-0910型交流接触器进行温升试验,将温度场的仿真结果与试验结果比较,误差较小,表明所建立热分析模型的可行性。研究结果对接触器材料的选择、结构的设计及其性能的优化有重要意义。     

A study of PtRuO2 catalysts thermally formed on titanium mesh for methanol oxidation

Platinum-based catalysts, for the electro-oxidation of methanol, have been made by thermal decomposition of chloride precursors onto titanium mesh. The catalysed electrodes were successfully operated in acidic methanol electrolytes. Electrochemical characterisation has been carried out using cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic polarisations. A complete analysis of the electrochemical results showed that the preliminary performance of the catalysed titanium mesh was comparable to that achieved with carbon-supported PtRu catalysts. The catalysts formed on titanium mesh by thermal decomposition also exhibited dimensional stability. Catalysed titanium mesh therefore appears to be a promising alternative to carbon-supported catalysts for certain fuel cell applications.     

15%恶霉灵防治水稻立枯病药效试验

田间试验表明，15％恶霉灵水剂6～8ml／m^2，对水稻立枯病的防效可达82.3％，病指防效可达89.4％，明显好于对照药剂。而且对水稻安全，能够提高秧苗素质。     

卧螺离心机共直流母线双电机双变频驱动

介绍了卧螺离心机差转速自动控制共直流母线变频调速系统的结构,分析了工作原理和节能效果,介绍了直流母线的两种并接方法。     

Measurement of AC conductivity and dielectric properties of flexible conductive styrene–butadiene rubber‐carbon black composites

Flexible conductive polymer composites were prepared using styrene–butadiene rubber (SBR) as a matrix and conductive carbon black as filler. The filler loading was varied from 10 to 60 phr. The effect of frequency, filler loading, temperature, and applied pressure on the AC conductivity, permittivity, and loss factor of the composites was studied. The AC conductivity of low and high loaded composites was found to be frequency dependent and independent respectively. The permittivity and the loss factor were continuously decreasing with increasing frequency. The increase in filler loading increased the AC conductivity, dielectric constant, and loss factor of the composites. Increase in temperature imposed increase in conductivity and permittivity of the composites. With increasing applied pressure the properties showed exponential increase. The effect of time under a constant compressive stress was studied and dielectric relaxation times were evaluated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 986–995, 2007     

微小型工业汽轮机智能交流伺服调节系统研究

为了解决微小型工业汽轮机组调节控制系统设备简陋,动态响应和稳态精确度差的问题,提出了一种采用交流伺服电机和模糊PID控制的自动调节系统．在对调节系统部件特性数据进行分析的基础上,应用机理分析法建立了工业汽轮机交流伺服调节系统的数学模型,建立了以模糊PID控制和常规PID为主的控制器仿真模型,并利用MATLAB（SIMULINK）进行了动态仿真．结果表明,采用交流伺服电机作为执行器比传统的机械式调节系统具有更优良的动态和稳态性;采用模糊PID控制策略的调节系统在减少调节时间、改善动态品质方面均好于常规PID调节器．为工业汽轮机交流伺服调节系统的进一步研究提供了理论基础．     

改性AC发泡剂的现状与发展对策

分析AC发泡剂原粉在应用中的一些缺陷;叙述改性AC的种类、改性的途径及我国改性AC的现状研究进展;探讨我国改性AC在品种和应用研究方面与国外的差距;应大力开发改性AC.