Effect of select parameters on the properties of edible film from water-soluble fish proteins in surimi wash-water

Edible film from water-soluble fish proteins were developed by casting film solution on leveled trays and effects of pH (9.5, 10.0 and 10.5), heating temperature (60, 70 and 80 °C), and heating time (10, 20 and 30 min) of the film solution on various film properties were determined using Response Surface Methodology (RSM). The impact of pH and heating temperature of film solution was more significant, overall, on the film's properties than heating time. Contour plots of tensile strength and elongation at break was highest at pH of 10.0 at 70 °C (2.75-3.02 MPa) but low in elongation at break (6.35-9.16%), while water vapor permeability and oxygen permeability were at their lowest (58.55-65.96 g mm/m² d kPa and 351.33-624.18 cm³ μm/m² d kPa). There was a direct correlation between the films’ and proteins’ solubility on one hand, and heating temperature of film solution on the other, which reversed with change in pH of film solution. Film color was darker and more yellowish with increase in the pH of film solution.     

Results of a User Study on 2D Hurricane Visualization

We present the results from a user study looking at the ability of observers to mentally integrate wind direction and magnitude over a vector field. The data set chosen for the study is an MM5 (PSU/NCAR Mesoscale Model) simulation of Hurricane Lili over the Gulf of Mexico as it approaches the southeastern United States. Nine observers participated in the study. This study investigates the effect of layering on the observer's ability to determine the magnitude and direction of a vector field. We found a tendency for observers to underestimate the magnitude of the vectors and a counter‐clockwise bias when determining the average direction of a vector field. We completed an additional study with two observers to try to uncover the source of the counter‐clockwise bias. These results have direct implications to atmospheric scientists, but may also be able to be applied to other fields that use 2D vector fields.     

Protein Extraction from Heat-stabilized Defatted Rice Bran: II. The Role of Amylase, Celluclast, and Viscozyme

ABSTRACT: The effectiveness of 3 carbohydrases for protein extraction from heat-stabilized defatted rice bran (HDRB) was evaluated. Amylase, viscozyme and celluclast extracted a maximum of 45.4, 12.1, and 28.5% protein, respectively. Further study showed that extracted protein ranged from 9.5 to 58.4% under conditions of water to bran ratio (5:1 to 20:1), α-amylase (0 to 110000 units/10 g rice bran), temperature (35 to 55 °C), and time (1 to 8 h). The maximum protein extracted was 58.4% with a water to bran ratio of 17:1, 87637 units amylase, and 50.9 °C. These results suggest that impure food-grade amylase containing protease is more effective than celluclast and viscozyme in protein extraction from HDRB.     

Changing our view on design evaluation meetings methodology: a study of software technical review meetings

By contrast to design meetings, design evaluation meetings (DEMs) have generally been considered as situations in which, according to DEM methodologies, design activities are quite marginal. In a study of DEMs in software development, i.e. in technical review meetings following a particular review methodology, we showed: (i) the occurrence of design activities as part of an argumentation process; (ii) the relative importance of cognitive synchronisation as a prerequisite for evaluation; (iii) the important role played in evaluation by argumentation that makes explicit the underlying design rationale (DR). On the basis of our results, we discuss the potential for using DR methodologies in this kind of meetings.     

History of depression and smoking cessation outcome: A meta-analysis.

The authors conducted a meta-analysis of published studies to (a) evaluate the premise that a history of major depression is associated with failure to quit smoking and (b) identify factors that moderate the relationship between history of depression and cessation outcome. Fifteen studies met the selection requirements and were coded for various study methodology and treatment characteristics. DSTAT was used to calculate individual study effect sizes, determine the mean effect size across studies. and test for moderator effects. No differences in either short-term (≤ 3 months) or long-term abstinence rates (≥ 6 months) were observed between smokers positive versus negative for history of depression. Lifetime history of major depression does not appear to be an independent risk factor for cessation failure in smoking cessation treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

海洋石油开发工业污染物产生系数和排放系数研究

污染物产生系数和排放系数是工程环境影响评价的重要指标,但对于海洋石油开发工程环境影响评价来说,迄今尚无具权威性的系数可资使用。在我国近海石油开发工程污染源系统调查的基础上,对海洋石油开发行业污染物产生系数和排放系数的定义、计算方法、应用范围及应用方式进行了探讨,研究结果可为海洋石油开发工程项目环境影响评价及环境保护管理,以及行业或企业有关标准的制定提供参考。     

Effect of specimen size and loading conditions on spalling of concrete

Different qualities of concrete have been fire tested using different geometries of the specimens as well as different load levels and load configurations. The main objective with the study was to examine a test methodology consisting of a full‐scale test and different small scale‐tests for determining the probability of spalling and the amount of spalling of fire exposed concrete structures. A reference specimen was defined as a one‐sided fire exposed slab with the dimensions 1800 × 1200 mm² giving an exposed area of 1500 × 1200 mm². A number of concrete qualities with different probabilities for spalling, were tested using the reference specimen. These tests showed that the reference specimens worked well giving the expected test results. Small specimens were manufactured in different shapes with the same concrete as the one used in the reference tests. These small specimens were tested either at the same time as the reference specimens in the large furnace or afterwards on a small‐scale furnace where the fire exposed surface was 450 × 360 mm². The test results clearly show the increased probability and the increased amount of spalling by using external compressive loading. The results also show that by using pre‐stress through bars or wires the load can be lost due to heating of the bars/wires which results in a decreased amount of spalling. The boundary of the specimen also affects the amount of spalling. The spalling around the edges was in all tests less than the spalling on the central parts of the exposed area. It could also be noted that the spalling did not pass completely through any of the specimens. The reason for this is probably that the water/vapour could migrate out from the unexposed surface of the specimen. Copyright © 2006 John Wiley & Sons, Ltd.     

《C语言程序设计》课堂教学方法的探讨

《C语言程序设计》一直是计算机专业及相关专业的专业基础课。该课程既难教又难学。传统的教学方法往往过分注重语法形式的介绍，却忽视了算法的讲解，使得学生无法解决一些实际编程，也很容易挫伤学生的学习兴趣。为此应以算法教学为主。因材施教，合理使用教材，在改用多媒体教学的同时，适当配以板书。调动学生的主观能动性，提高其编程能力。     

Layout-Specific Circuit Evaluation in 3-D Integrated Circuits

In this paper, we describe a comprehensive layout methodology for bonded three-dimensional integrated circuits (3D ICs). In bonded 3D integration technology, parts of a circuit are fabricated on different wafers, and then, the wafers are bonded with a glue layer of Cu or polymer based adhesive. Using our layout methodology, designers can layout such 3D circuits with necessary information on inter-wafer via/contact and orientation of each wafer embedded in the layout. We have implemented the layout methodology in 3DMagic. Availability of 3DMagic has led to interesting research with a wide range of layout-specific circuit evaluation, from performance comparison of 2D and 3D circuits to layout-specific reliability analyses in 3D circuits. Using 3DMagic, researchers have designed and simulated an 8-bit encryption processor mapped into 2D and 3D FPGA layouts. Moreover, the layout methodology is an essential element of our ongoing research for the framework of a novel Reliability Computer Aided Design tool, ERNI-3D.     

面向大规模定制的虚拟设计研究

综述了大规模定制的范围经济性和面向大规模定制的基本设计方法，并提出了一个虚拟设计框架，该框架改变了传统的设计模式，利用先进的设计方法学和仿真支撑技术为产品开发提供了最大柔性和敏捷性。同时，它提供了一个多学科合作的设计环境，用户直接参与进设计循环中。最后，结合新型剑杆织机的开发，展示了一个能够支持新产品快速成功开发的虚拟设计环境。