电视监控系统云台控制器设计

电视监控系统是一种典型的分布式计算机信号采集系统。为了提高监控的范围和效果,云台控制器的优劣直接影响监控的范围和效果,因此对云台控制器的设计具有重要的意义。本系统采用串型通信,通过Modbus协议把控制信号输入单片机,经过对AT89S52单片机的编程,从而对八路继电器输出进行控制。系统不仅结构简单,而且还可以方便的对镜头、防护罩的控制进行扩展,功能强大,可以广泛应用于电视监控系统中的云台控制。     

ARM和WinCE6．0下nRF24L01的驱动设计

随着嵌入式WinCE系统的发展和近距离无线通信的广泛使用,有必要为近距离无线通信芯片编写驱动。由于nRF24L01在WinCE系统下驱动的缺乏,使得WinCE与nRF24L01芯片之间的直接通信成为困难。本文的驱动设计正好解决了这一难题。     

Evaluation of contrast metrics for liquid‐crystal displays under different viewing conditions

Abstract— A psychophysical experiment was carried out to assess the perceptual contrast on a large‐sized liquid‐crystal display (LCD) under nine phases of viewing conditions. Based on the results, six contrast models employing different color attributes or the index of just‐noticeable difference (JND) were developed. Their performances were also tested by the visual data of the nine phases, which indicated that the model C_Q employing CIECAM02 brightness gives the best performance in predicting visual data under different viewing conditions among those models. A preprocessing step was also proposed to utilize the contrast model C_Q conveniently in the practical contrast evaluation of LCDs.     

基于CDMA的停车场车位引导系统设计

本文介绍了基于CDMA的停车场车位引导系统的设计方案,阐述了系统软硬件设计、CDMA主要特点及接口电路图。该系统采用CDMA无线通信模块,使系统性能更加完善。实验结果表明本系统与485通信系统、CAN总线通信系统相比,通信距离和通信速率明显提高。本系统避免了一路出错导致整个系统瘫痪的问题,使停车场车位引导系统更加智能化。     

基于MCS-51系列单片机时间控制器软件的设计与实现

本文设计的基于MCS-51系列单片机时间控制器主要应用AT89C51作为控制核心,采用实时时钟芯片DSl302、EipROM24C02及动态数码显示相结合。具有硬件电路简单、软件功能完善、控制系统可靠、性价比较高等特点,具有一定的使用和参考价值。     

Ti－24Al－11Nb腐蚀疲劳断口形貌的研究

Ｔｉ－２４Ａｌ－１１Ｎｂ腐蚀疲劳断口形貌的研究张跃，褚武扬，王燕斌，肖纪美（北京科技大学北京１０００８３）１引言对Ｔｉ－２４ＡＩ－１１Ｎｂ合金的断裂特征和断口形貌已进行了较多的研究［“］．在３００ｏＣ的氢气中该合金能发生氢致开裂，其断口形貌与过载断口...     

Premodification of Pt/γAl2O3 with Cinchonidine for the Enantioselective Hydrogenation of Ethyl Pyruvate: Effect of Premodification Conditions on Reaction Rate and Enantioselection

The premodification of a 5 wt% Pt/-Al₂O₃ catalyst with cinchonidine (0.01 and 0.2 g g^-1 _catalyst) is described and discussed. Premodification is carried out by treating the catalyst with a solution of cinchonidine followed by solvent removal. Catalysts premodified in this way give the same ee and initial rate of reaction for the enantioselective hydrogenation of ethyl pyruvate as those using the standard in situ modification procedure. Investigations of different solvents for premodification and reaction (dichloromethane, ethanol) show that it is the solvent used for the reaction that controls the observed enantioselection. Premodified catalysts also display the initial transient behavior typically observed with in situ modified catalysts in which the ee increases with conversion in the early part of the reaction. Premodified catalysts show an enhanced rate of reaction when ethanol is used as the reaction solvent compared with in situ modified catalysts under the same conditions. Premodification using aerobic conditions gives the best results and premodified catalysts can be stored prior to use for up to a week without loss of catalytic performance.     

基于ARM的便携式电机参数实时监测仪设计

针对三相电机参数监测问题,基于AT91SAM9261微处理器和嵌入式实时操作系统VxWorks,设计了一套便携式电机参数监测仪。监测仪以ATT7022B电能测量芯片和鉴相计数单元为核心,对三相电机的工作电压、电流及电机的转速转向参数进行实时监测与故障报警,并能在联网模式下通过以太网与上层监控主机通信,实现远程参数监测和多电机联网测量,保证系统安全的同时方便了伺服系统调试。     

Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films: rheology, morphology, molecular orientation and tensile properties

In situ composite films were prepared by a two-step method. First, polypropylene and thermotropic liquid crystalline polymer (TLCP), Rodrun LC5000 (80 mol% p-hydroxy benzoic acid (HBA)/20 mol% polyethylene terephthalate (PET)), were melt blended in a twin-screw extruder and then fabricated by extrusion through a mini-extruder as cast film. Rheological behavior of the blends, morphology of the extruded strands and films, and tensile properties of the in situ composite films were investigated. Rheological behavior of the blends at 295 °C studied using a plate-and-plate rheometer revealed a substantial reduction of the complex viscosity with increasing TLCP content, and all specimens exhibited shear thinning behavior. Over the angular frequency range of 0.6-200 rad/s, the viscosity ratio (dispersed phase to matrix phase) was found to be very low, in the range of 0.03-0.07. Morphologies of the fracture surfaces of the blend extrudates and the film surfaces etched in permanganic solution were investigated by scanning electron microscope (SEM). The TLCP droplets in the extruded strands were seen with a progressive deformation into fibrillar structure when TLCP content was increased up to 30 wt%. In the extruded films, TLCP fibrils with increasing aspect ratio (length to width) were observed with increasing TLCP concentration. Orientation functions of each component were determined by X-ray diffraction using a novel separation technique. It was observed that the Young's modulus in machine direction of the extruded film was greatly improved with increasing TLCP loading, due to the increase in fiber aspect ratio and also molecular orientation.     

基于LT3182和LC3282的429总线收发装置

为了实现对用户需求的快速响应,设计了以L89C51RD2为核的系统板。对于LT3182和LC3282的功能进行演示和测量,并能够检测产品参数指标。实践证明,该板能够演示LT3182和LC3282的各项功能,并能够满足现场分析需求。