乐山旅游景区的地形特点及无线通信方案探究

根据乐山物联网产业规划——"把乐山建成全国物联网应用示范城市"的战略目标,考虑到乐山的城市特点,并为了充分发挥乐山的旅游资源及环境优势,将旅游纳入物联网工程管理项目,形成具有乐山特色的"智能景区"旅游管理项目,文中将新科技与传统资源相结合,给出了基于物联网技术的乐山旅游景区无线通信方案。该方案既可使物联网产业化,又具有创新性与实用性,同时也可大大改善传统人工管理的效率。     

基于ISA100.11a标准的工业物联网开发平台的设计与实现

工业物联网技术是未来几年工业自动化产品新的增长点。作者所在实验室作为Voting Member和ISA WCI工作组成员参加ISA100.11a标准的制定,研发了基于ISA100.11a的工业物联网通信协议栈软件、网络设备及终端设备,研制的ISA100.11a工业物联网开发平台具有完善的硬件、软件产品及技术支持,核心技术已经形成专利池,可广泛应用于智能工业、环境监测、智能电网等应用系统的开发,并已经在中国四联集团、韩国汉阳大学等单位得到应用。     

海水中VLF传播特性分析

本文以电磁波反射定律与折射定律为基础,建立了电磁波在两种介质分界面处的传播模型,研究了甚低频电磁波在导电媒质中的传播特性,推导了甚低频波在海面及海水中传播的电场表达式,分析了导电媒质对不同频率的电磁波所产生的影响,分析结果表明,甚低频电磁波在海水中的穿透深度较大,能够满足水下通信要求。     

浅析计算机网络通讯存在的问题及其改进策略

随着计算机技术取得的长足发展以及计算机的日益普及,计算机网络通讯已成为人们生活及工作中的不可或缺的组成部分。虽然计算机网络通讯极大的方便了人与人之间的沟通,但是仍然存在诸多问题,主要表现在网络通讯技术故障和网络通讯安全方面。网络故障问题主要是硬件连接和软件设置问题,网络通讯安全问题主要体现在非法窃听、恶意篡改、假冒以及对个人信息的非法操作等方面。本文简要剖析了计算机网络通讯当前存在的问题以及针对问题提出了相应解决方案。     

焊接设备中计算机控制系统的抗干扰

本文分析提出焊接设备中影响计算机控制系统的几种主要干扰。结合实际工作,提出了解决的措施和方法。     

一种适合卫星可靠组播的差错恢复方案*

针对卫星网络高误码率、长延时等特点,提出了一种适合卫星可靠组播的差错恢复方案。该方案采用异或（XOR）编译码的方法,可以一次重传恢复多个丢失的数据包;在此基础上,设计了一种基于重传矩阵预处理的最优重传策略来实现重传数量最小化。仿真结果证明了该可靠组播差错恢复方案在卫星环境中的有效性。     

分布式PACS通信服务中间层构造方法研究

基于目前分布式PACS中存在的问题,提出一个通信服务中间层的构造方法,分别进行了基于设计模式通信框架的构造、DICOM图像互操作和分布式PACS可复用构件的研究.通信服务中间层的构造不仅提高了分布式PACS在网络异构环境中的可移植性、可扩展性以及相关QoS性能,还满足了PACS今后发展中提出的较高的互连互操作性的要求.     

Asynchronous decentralized event-triggered control

In this paper we propose an approach to the implementation of controllers with decentralized strategies triggering controller updates. We consider set-ups with a central node in charge of the computation of the control commands, and a set of not co-located sensors providing measurements to the controller node. The solution we propose does not require measurements from the sensors to be synchronized in time. The sensors in our proposal provide measurements in an aperiodic way triggered by local conditions. Furthermore, in the proposed implementation (most of) the communication between nodes requires only the exchange of one bit of information (per controller update), which could aid in reducing transmission delays and as a secondary effect result in fewer transmissions being triggered.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

PLC上位机监控软件的开发

为提高硫化机控制水平，采用电阻式触摸平板电脑为上位机与PLC相结合。系统设计主要包括各监控画面的设计和上位机与PLC之间的通信设计，监控主画面设计成包含所有操作员需要了解的数据。实时曲线画面为圆盘型和直线型两种，上位机与PLC之间的通信采用VB6.0编程，实际运行证明状态良好。